Transcript
8910-05
1. SPECIFICATION Unit General
Description
Specification
Rated voltage
DC 14 V (Negative ground)
Speaker
4 Ohm
Output
MP3[WMA], CD
45 W x 4 channels
Current consumption
10 A (at maximum power)
Sampling frequency
8 times oversampling
DA converter
4 DAC system
Pick-up type
Astigma 3-beam
Light source
Semiconductor laser
Wave length
780nm
Frequency response
20Hz ~ 20kHz(± 3dB)
Signal to noise ratio
≥50 dB ≤1% (1kHz)
Total harmonic distortion Wow and flutter
Below measurable limits ≥35dB
Channel separation Radio
Bluetooth
Frequency range
FM MW LW
87.5MHz ~ 108MHz 522kHz ~ 1,620kHz 144kHz ~ 290kHz
Usable sensitivity
FM MW LW
≤18 dBu ≤35 dBu ≤35 dBu
Signal to noise ratio
FM MW LW
≥45dB ≥40dB ≥40dB
Stereo separation
FM
≥20dB
Performance
Audio distribute profile (A2DP)
10-3
10-4
Unit USB MP3[WMA]
Micro-pole antenna
Description
Specification
Frequency response
20Hz ~ 20kHz
Total harmonic distortion
0.1 % (at 1kHz)
Dynamic Range
85dB (at 1kHz)
Signal-to-noise ratio
60dB (at 1kHz)
Channel separation
54dB (at 1kHz)
Operating current
up to 150 mA
Operating voltage
DC 10.5 ~ 16.0 V
Operating temperature
-30˚C ~ +60˚C
Storage temperature
-40˚C ~ +80˚C
Input/output impedance
75Ω (FM)
8910-05
10-5
2. MAJOR CHANGES Audio assembly CDP (MP3) + Bluetooth
CDP(MP3) + RDS + Bluetooth
The “CALL” button for Bluetooth system has been added.
3. RDS (RADIO DATA SYSTEM) AUDIO RDS (Radio Data System) is a broadcasting service which a growing number of FM stations are now providing. It allows the FM stations to send additional signals along with their regular programme signals. For example, the stations send their station names and information about what type of programme they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up, the station frequency (and then the station name if sent) is displayed. Not all FM stations provide RDS service, nor do all RDS stations provide same services. If in doubt, check with local radio stations for details on RDS services in your area. This machine can use the following RDS service. PS (Programme Service name) / PTY (Programme Type) / TP (Traffic Program) / TA (Traffic Announcement) / AF (List of Alternative Frequencies) / RT (Radio Text) This allows you to locate a specific type name of programme being broadcast.
10-6
1. LAYOUT -
Audio CDP (MP3) Radio USB/AUX Bluetooth hands-free
Remote control switch on steering wheel
Front door tweeter speaker
Front door speaker
8910-05
10-7
Audio assembly CDP (MP3) + Bluetooth
CDP(MP3) + RDS + Bluetooth
USB/AUX
Hands-free microphone
Rear door speaker
10-8
1) Audio Control Switch ▶ CDP (MP3) + Bluetooth
No. 1 2
Name Power/Mute/Pause/Enter/Volume button Station memory button (1~6) and Audio function button
3
Bluetooth hands-free CALL button
4
Bluetooth hands-free END button
5
Previous (≪) and Next (≫) button
6
SCAN/INFO button
7
BAND/AS button
8
SETTING button
9
Display window (LCD)
10
USB/AUX button
11
Disc Play button
12
Disc Eject button
13
Disc slot
8910-05
▶ CDP (MP3) + RDS + Bluetooth
No.
Name
1
Display window
2
RDS button
3
AF/TA button
4
SEEK button
5
CALL button
6
Disc slot
7
CD/AUX/USB button
8
POWER button with VOLUME dial
9
Station memory button (1~6)
10
BAND/AST button
11
SCAN / INFO button with dial
12
EQ/SOUND button
13
END button
14
Disc Eject button
10-9
10-10
2) Steering Wheel Audio Switch If your vehicle has this feature, some audio controls can be adjusted at the steering wheel. They include the following: Steering wheel audio switch
▶ MUTE [ ] Press: to turn the system on, to mute on/off Press and hold: to turn the system off ▶ MODE Press: to select the functions (CD → USB → AUX → RADIO) Press and hold: to select the bands (FM1→ FM2 → MW → LW) ▶ ▲VOLUME▼ Press to increase/decrease the volume. ▶ ▲SEEK▼ When listening to a station: Press: to go to the next/previous preset station Press and hold: to search the next/previous radio station (The radio seeks stations only with a strong signal that are in the selected band). When playing a CD or USB: Press: to go to the next/previous track: Press and hold to fast forward/backward through the tracks. ▶ PHONE [ ] During the standby: Press: to make a call via voice-activated dialing function Press and hold: to make a call via last call dialing function When a call comes in: Press: to receive the incoming a call Press and hold: to reject the incoming a call During a call Press/Press and hold: to end a call
