Preview only show first 10 pages with watermark. For full document please download

2145

   EMBED


Share

Transcript

Extended Range Loudspeakers Special Duty Loudspeakers ii I\ & * 2145 300-mm (12-in) Composite An integrated system consisting of a 300.mm (Gin) low frequency loudspeaker, separate 50-mm (2.in) high frequency direct radiatorand 3-kH2 frequency dividing network Often used as a monitor system in limited space applications. its frame is shallow enough to allow installation within wall or ceiling structures for distributed music and paging systems. 2150 380-mm (15-in) Composite Ideally suited for maximum intellrgrbrlrty,high level paging systems and distributed reinforcement in large areas. It consists of a 380-mm (15-in) low frequency loudspeaker and a 130.mm (5-in) direct radiator integrated on a singleframe.The 2150 may be installed in ported enclosures or in a 4530 low frequency horn. [The 3125, a 1200.Hz network, is optional.) 2105 130-mm @-in) Speech Range A powerful midrange loudspeaker providing high acoustic output, smooth response and wide drsperston Well suited for in-line arrays and distributed cerlrng installations for naturolsounding paging systems or limited bandwidth musrc reproductionThe 2105 is also useful as a midrange dnver in medium efficiency monitor systems. 2115 200-mm (a-in) Full Range Natural wide-range performance with peakfree response and freedom from distortron through more than eight octavesThe 2115 can be used in distributed systems as a single-unit monitor or in column array for moderate level, high quality reinforcement SpewI JBL Professional Series extended range loudspeakers are rugged, precrsion transducers for use in custom ltne arrays, distributed source installations and general applrcatrons. Frequency range extending through the major portion of the audio spectrum allows their use as single-driver systems, for reproduction of the extreme high frequencres each may be augmented by a compressron driver equrpped with the appropriate horn and acoustic lens These drivers incorporate precisely machined. highly efficient magnetic assemblies, large edgewound alumrnum voice coils. and shallow. curvlllnear cones Pneumatrcally formed alumrnum center domes provrde high frequency reproduction Duty Loudspeakers 2105 Nominal Diameter 130mm 2115 5 in 200 mm B I” 2145 Nominal Impedance 8n 80 or l&l 8n sensltlvlty’ Power Capaclh/ (Continuous Program) 4ow 1 W. 1 m 1 mW, 30 R Frequency Range (3.3 It) (9.1 ml 95 dB 46dB 150Hz-15kHz 4ow SFI 92 dB SPL 43 dB 35w SPL 92 dB SPL 43 dB SPL 300 mm 12in _____________________---_-------___--________~~~______----------- Low Frequency High Frequency 2150 Bfl 380 mm “C i^ 14 I/\ Htgh Frequency 130 mm 5ow IOOdB 51dB sn _ Net Weight 2% lb 1.65T (16.500 gauss1 6 litres 0.2 ft’ 76 mm 3x I” 1 4 kg 3 lb Aluminum 3 kg 6% lb 0 85.T (6500 gauss) 28 -56 lltres 1~2rt’ 98 mm 3x I” 3.6 kg 8 lb 76 mm copper 3 kg 6%lb 57-85 lltres 2.3flJ 111 mm 4% in 4.3kg 9%lb ;1’,.000 gauss1 16mm W in Copper 0.7 kg l%lb 1.2T (12.000 ga”ssJ 102 mm * in copper 5.7 kg 12%lb 1.15T II 1.500 aaussi 169 i1tres 6 flJ 146 mm 5% I” 7.2 kg 15Wlb 22 mm copper 12 kg 2X lb 1657 (16 500 gauss] 200Hz 22 mm copper 55 Hz 51 mm 2 in 40 Hz 15 kHz 50Hz-12kHz 1.2 kg 30 Hz SPL SK Depth Voice Coil Mctwol 50 mm 2 in Low Frequency Recommended EllCIOS”KZ? Volume Voice Coil Diameter TQin POHz-15kHr .. lvlagnetic Assembhl Weight Flux Density NOllll”Cll Free Air Resonance 55 Hz ____________~____________~-_~_-----______-__ %Irl 5 I” Extended Range Loudspeakers 2110 200mm Bfl 8 I” 2ow 97 dB SR 48 dB SR 6OHz-IOkHz m Hz 51 mm 2 I” Aluminum 16 kg 3% lb OPT (9 000 gauss] 56 85 lltres 2 3 tt3 79 mm 3x In 2 kg 4%lb 2120 250mm 6OW 98dB 49dB SOHz-8kHz 65 Hz 76 mm Aluminum 3 kg SPl 52dB 6% lb lllmm 4MlrI 37kg 8% lb IOOW SPL 101 dB 85 113 lltwx 3.4tt3 2130 10 I” 300mm 1027 (lo2oogo”ss] Aluminum SFI 54dB 12T (12000ga”ss] 85 169 lltres 3 6ft’ 127mm 5 I” 68kg 15lb IOOW SFt 103dB 5 9 kg 13lb 24 35 121n 3BOmm Alumfnum 5 9 kg SR SK 127 (12OOOgouss) 113 169 lltres 4-6f13 146mm 5% I” 75kg 16%lb 15 I” t3n Bil 80 1 Sensltlwty measured wth on Input swept horn 500 Hz to 2 5 kHz 3 I” 50Hz-5kHz 60 HZ 102 mm 4 I” 40Hz-5kHz 40 Hz 102 mm 4 I” 13lb 2145 12-INCH COMPOSITE TRANSDUCER Specifications: Frequency Response 40-l 5,000 Hz & 3 dB in 6 cu. ft. cabinet Sensitivity’ 43 dB Dispersion 80° at 2000 Hz 1 20° at 1000 Hz Impedance 8 ohms Voice Coil Diameters 3-inch low frequency, 9/l 6-inch high frequency Power Capacity 35 watts program Flux Density LF 10,400 gauss HF 12,000 gauss Crossover Frequency 3000 Hz Depth 4-318” Net Weight 4.6 kg (10 lb) 1. Sensitivity measured at 30 feet (9.1 m) with a 1-mW input warbled from 500 to 2500 Hz. Jgmes B. Lansing Sound, Inc. 8500 Balboa Boulevard, Northridge, Calif. 91329 (213) 893-8411 50798 PPBPI 45 8/77