Transcript
2.4 GHz 14 dBi Panel Enclosure, Flat Patch Wireless LAN Antenna with Integral Equipment Bay, CAT5/6 Connector and Mast-Mounting Hardware
Model: HG2414PEV
Applications and Features Applications:
Features:
Wireless system installations 2.4 GHz ISM Band IEEE 802.11b and 802.11g Wireless LAN Bluetooth® Public Wireless Hotspot WiFi
Internal Equipment Bay (9.0 x 9.0 x 1.75 inches) Light weight, easy to install Durable UV-stable, UL flame rated radome Low loss etched elements DC Short lightning protection Integral CAT5/6 Quick Connector Can be installed for either vertical or horizontal polarization Includes tilt and swivel mast mount Optional wall mounting brackets available Superior Performance and RoHS Compliant
Description Directional Panel Enclosure Antenna
The HG2414PEV is a high performance directional flat patch WiFi antenna suitable for indoor and outdoor applications in the 2.4GHz ISM band, including IEEE 802.11b and 802.11g wireless LANs, Bluetooth®, and public wireless hotspots. This WiFi antenna is lightweight and features: Internal Equipment bay for mounting Radios and electronics; Quick Connect/Disconnect CAT5/6 Interface for ease of installation and service; Optional Antenna/Radio pigtail configurations; an aesthetic UV-stable, UL flame rated white plastic radome; Mounting Hardware included. The antenna is designed to operate seamlessly with the radio and connects effortlessly with the CAT5/6 cable. The Antenna and Radio can be configured in the shop, prior to installation and installed easily in the field.
The HG2414PEV Panel Enclosure antenna is supplied with a 60 degree tilt and swivel mast-
Radio Mounts Included with Antenna
mounting kit. This antenna can be wall mounted with the optional mounting bracket. The antenna is unassuming when installed and rugged construction assures long life. Radio mounting hardware is included with the antenna. Environmental edge seal keeps the elements out of the interior of configured antenna.
The customer installed integrated Radio is connected to the antenna by a pigtail. The pigtail cables are included with the antenna and selected from the following pre-configured cables
Mounting Bracket Hardware
that connect to the radio with RP-SMA Plug, RP-TNC Plug, RP-MMCX Plug, and UFL. Custom cables are available. L-com, Inc. 50 High St., West Mill, 3rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail:
[email protected] Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
Specifications HG2414PEV Electrical Specifications Frequency
2400-2500 MHz
Gain
14 dBi
Horizontal Beam Width
20 degrees
Vertical Beam Width
20 degrees
Impedance
50 Ohm
Maximum Input Power
50 Watts
VSWR
< 1.5:1 avg.
Lightning Protection
DC Short
Mechanical Specifications Enclosure Connection
CAT5/6 Cable Quick Connect/Disconnect (PoE)
Mounting
1-1/4" (32 mm) to 2" (53 mm) dia. masts
Vertical Tilt
0-60°
Weight
2.84 lbs. (1.29 Kg)
Overall Dimensions
10.0 x 10.0 x 2.7 (inches) 253 x 253 x 70 (mm)
Equipment Bay Dimensions
9.0 x 9.0 x1.75 (inches) 229 x 229 x 45 (mm)
Radome Material
UV-inhibited Polymer
Flame Rating
UL 94HB
Polarization
Horizontal or Vertical
Operating Temperature
-40° C to 85° C (-40° F to 185° F)
Wind Survival
>150 MPH (241 KPH)
RF Antenna Gain Patterns
L-com, Inc. 50 High St., West Mill, 3rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail:
[email protected] Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
