Transcript
2.5" SSD/HDD Enclosure SATA 2 – USB 2.0
Introduction Congratulations on your purchase of this Portable USB2.0 Hard Drive Enclosure. It's a great way of making a lightweight, portable mass storage device with an unused internal hard drive, and it will be detected and installed automatically by the computer when connected. Depending on the capacity of the drive used, you can keep large files, run programs and play videos directly from it, thanks to its super-speed USB2.0 connection. It can also be used as a backup drive to a computer or other devices.
Specification Transfer interface
USB2.0
Transfer rate
480Mps (MAX)
Support HDD
2.5" Hard disk
Work temperature
-40~65 °C
Work humidity
8%~90%
Storage humidity
5%~95%
Operate system
Windows 2000/XP/VISTA/WIN7/8/10,iOS, MAC OS X and above version
System Requirements Hardware: computer should have USB port Software: Windows 2000/XP/VISTA/WIN7/8/10, iOS, MAC OS X and above version Note: Windows98 have to install CD Driver
Package Content
2.5" SSD/HDD Enclosure SATA 2 - USB 2.0 Screwdriver Screws USB 2.0 cable Manual
Installation of Hard Drive 1. Slide opens the disk tray and installs hard drive into the tray
2. Make sure the SATA connector fits into the hard drive well
3. Slide the hard disk in and fix the tray by screws in real
4. Connect the enclosure with computer by USB cable 5. When attached to PC or device, click 'My Computer' and hard drive will appear 6. No additional drivers required
Operation System Windows 2000/XP/VISTA/WIN7/8/10, iOS, MAC OS X No driver program is necessary. Connect the USB cable to PC. Click “My computer” and hard-disc will appear. An icon for online plug should appear on the lower right corner of the status bar (new hard-disc should be divided into sections with F DISK first, then its icon will appear and normal operation can start after formatting.)
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below mentioned manufacturer address. Warning: This device is a class B product. This equipment may cause some radio interference in living environment. In this case, the user can be requested to undertake appropriate measures to prevent interference. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany
