5 6 7 8

Transcript

7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR 31.02 19.6 0.29 0.68 MAX TYP 17 TOP LED NO. 2 SEE TABLE FOR COLOR CONTACT NO. 1 7.04 8 PLC 1. 6.65 2 PLC TOP LED NO. 1 SEE TABLE FOR COLOR OUTER SHIELD 1.19 D 31.45 2 7 27.19 BOTTOM LED NO. 2 SEE TABLE FOR COLOR C LED TERMINALS, 8 SOLDERTAILS DIM A 10 3.05 HOUSING BOTTOM LED NO. 1 SEE TABLE FOR COLOR CONTACT NO. 1 APVD K REV PER ECO-14-016319 23OCT2014 LL SH L REV PER ECO-15-010136 10JUL2015 LL SH MATERIAL: HOUSING - PBT POLYESTER, BLACK, UL 94V-O. TERMINALS - 0.33 THICK PHOSPHOR BRONZE PLATED WITH 1.27um MINIMUM THICK HARD GOLD IN LOCALIZED MATING INTERFACE AND 3.81um MINIMUM THICK MATTE TIN IN SOLDER AREA OVER 1.27um MINIMUM THICK NICKEL UNDERPLATE. SHIELD - 0.196 THICK COPPER ALLOY PLATED WITH 1.27 um [.000050] MINIMUM NICKEL AND 2.03 um [.000080] MINIMUM HOT TIN DIP ON PCB GROUND TABS.. LIGHT EMITTING DIODE (LED) - DIFUSED EPOXY LENS, 0.51 X 0.51 CARBON STEEL WIREFRAME LEADS PREPLATED WITH 8.89 um THICK Sn/Cu OVER 2.03 um THICK Ag OVER 1.02 THICK Cu OVER 3.56 um THICK Ni OVER 1.02 um Cu UNDERPLATE 3 SUGGESTED OPERATING CURRENT FOR THE LED IS 20mA, GREEN/ORANGE BI-COLOR LEDS ON 6368011-4 AND 1-6368011-0 WILL EMIT GREEN LIGHT ON FORWARD BIAS CURRENT AND ORANGE LIGHT ON REVERSE BIAS CURRENT. GREEN/RED BI-COLOR LEDS ON 6368011-9 AND 1-6368011-0 WILL EMIT GREEN LIGHT ON FORWARD BIAS CURRENT AND RED LIGNT ON REVERSE BIAS CURRENT. GREEN/YEL BI-COLOR LEDS ON 1-6368011-1 WILL EMIT GREEN LIGHT ON FORWARD BIAS CURRENT AND YELLOW LIGNT ON REVERSE BIAS CURRENT. 4. THIS MODULAR JACK WITH INTEGRATED LED IS NOT IR REFLOW SOLDERING PROCESS COMPATIBLE. 5 USE NO. 30 DRILL BIT OR 3.25mm DRILL BIT WHEN PRODUCING THESE PCB HOLES. 6 HM-15 LUBE APPLIED TO THE GOLD PLATED AREA OF THE TERMINALS ON 6368011-8 ONLY. 7 DATE CODE LOCATED ON REAR OF PART APPROX AS SHOWN: FIRST 2 DIGITS ARE LAST 2 DIGITS OF YEAR, SECOND 2 DIGITS ARE MANUFACTURING WORK WEEK, LAST DIGIT IS DAY OF WEEK, WITH SUNDAY=1. 10.74 UPPER AND LOWER INSERT TERMINALS, 16 SOLDERTAILS DWN JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F. 2.95 10 2.84 10 DATE 2 04102 3.18 DESCRIPTION D C 8 THE PART NUMBER IS PRELIMINARY. 9 OBSOLETE PARTS:OBSOLETE CIS STREAMLINING PER D.RENAUD/D.SINISI 10 GROUND PIN AND ALL SIGNAL PINs' LENGTH SHOULD BE 4.06 MM EXCEPT OUTER SHIELD THIS REQUEST IS ONLY FOR PART 1-6368011-4 LOWER INSERT B B 1.09 BOTTOM LED NO. 2 SEE TABLE FOR COLOR BOTTOM GROUND TABE UPPER INSERT BOTTOM LED NO. 1 SEE TABLE FOR COLOR DIM A 2.8 PN 1-6368011-2 SAME AS 6368011-1 EXCEPT AS SHOWN WITH ONLY BOTTOM LED AND WITH BOTTOM GROUND TABE SCALE 4:1 4.14 3.44 MAX 4.14 3.175 A OBSOLETE YELLOW GREEN YELLOW GREEN ORANGE N/A N/A GREEN YELLOW N/A 1-6368011-3 8 1-6368011-2 4.14 GREEN/RED GREEN/RED GREEN/RED GREEN/RED 6368011-9 GREEN/ORANGE GREEN/ORANGE YELLOW 4.14 4.14 4.14 GREEN ORANGE YELLOW GREEN MATERIAL SEE NOTE 1 YELLOW N/A GREEN/RED 6368011-7 GREEN GREEN/ORANGE GREEN/ORANGE GREEN/ORANGE GREEN/ORANGE YELLOW GREEN GREEN YELLOW YELLOW GREEN GREEN BOTTOM LED NO. 2 BOTTOM LED NO. 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.25 - SEE NOTE 1 GREEN TOP LED NO. 2 13APR2005 Vic Slack/L.A.MAYER CHK 13APR2005 J.WESTMAN APVD 13APR2005 S.FLICKINGER DWN GREEN NAME 108-1163-2 APPLICATION SPEC 114-2154 WEIGHT - Customer Drawing 6 6368011-6 GREEN 6368011-5 6368011-4 YELLOW 6368011-3 6368011-2 GREEN 6368011-1 TOP LED NO. 1 A PART NUMBER TE Connectivity PRODUCT SPEC - 6368011-8 N/A YELLOW YELLOW 1-6368011-0 GREEN GREEN GREEN 4.14 GREEN/RED GREEN GREEN mm 4805 (3/13) 1-6368011-4 1-6368011-1 DIMENSIONS: PN 6368011-7 SAME AS 6368011-1 EXCEPT AS SHOWN WITHOUT TOP LED SCALE 2:1 N/A 1-6368011-5 GREEN/YELLOW THIS DRAWING IS A CONTROLLED DOCUMENT. PN 6368011-1,2,3,4,5,6,8 & 1-6368011-0,1,5 SCALE 2:1 GREEN GREEN/YELLOW DIM A PN 1-6368011-3 SAME AS 6368011-3 EXCEPT AS SHOWN WITHOUT TOP LED PN 2-6368011-1 SCALE 2:1 GREEN 2-6368011-1 GREEN/YELLOW 4.14 9 GREEN GREEN N/A GREEN/YELLOW 4.14 OBSOLETE N/A 4.14 4.14 9 GREEN/ORANGE GREEN 10 4.14 GREEN/ORANGE SIZE MODULAR JACK ASSEMBLY,STACKED, 2 X 1, 8 POSITION, SHIELDED, PANEL GROUND, LED, CATEGORY 5 CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 6368011 SCALE 4:1 SHEET 1 OF - 3 REV L 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. BY - P LTR DESCRIPTION SEE SHEET 1 - TOP LED 2 TOP LED 1 GREEN GREEN YELLOW YELLOW D 7 8 5 6 2 1 3 4 5 7 3 ANODE (+) TYP 2 6 4 3 1 8 5 6 2 8 1 7 3 ANODE (+) TYP 3 3 4 4 3 1 6 5 C BOTTOM LED 2 BOTTOM LED 2 GREEN GREEN RED RED ORANGE ORANGE 8 5 6 3 4 4 3 1 2 6 5 GREEN GREEN 3 B 7 8 5 6 3 4 1 8 5 6 1 3 4 3 6 5 8 1 ORANGE BOTTOM LED 1 TOP LED 1 3 4 7 1 3 2 4 3 6 5 8 ANODE (+) TYP 5 6 2 8 1 7 4 4 3 2 6 5 B 1 8 7 3 ANODE (+) TYP ANODE (+) TYP GREEN GREEN BOTTOM LED 2 BOTTOM LED 1 SCHEMATIC FOR 6368011-7, 1-6368011-2, 1-6368011-3 RED BOTTOM LED 2 BOTTOM LED 1 SCHEMATIC FOR 6368011-9 SCALE 4:1 BOTTOM LED 1 SCHEMATIC FOR 6368011-1,-2,-3,-5,-6, -8, 14 SCALE 4:1 RED A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL SEE NOTE 1 4805 (3/13) 3 7 3 A 7 SCHEMATIC FOR 6368011-4 SCALE 4:1 ANODE (+) TYP BOTTOM LED 2 5 BOTTOM LED 2 2 2 2 8 RED 7 3 ANODE (+) TYP 6 GREEN TOP LED 2 RED D 2 ORANGE BOTTOM LED 1 GREEN 4 4 - C ORANGE TOP LED 1 - 1 GREEN GREEN TOP LED 2 3 APVD ANODE (+) TYP 3 SCHEMATIC FOR 1-6368011-0 SCALE 4:1 SCHEMATIC FOR 1-6368011-1 SCALE 4:1 6 1 7 BOTTOM LED 2 5 2 ORANGE BOTTOM LED 1 8 8 GREEN YELLOW 7 3 ANODE (+) TYP ANODE (+) TYP BOTTOM LED 1 SCHEMATIC FOR 2-6368011-1 SCALE 4:1 GREEN 1 3 ORANGE GREEN 7 GREEN ORANGE TOP LED 1 2 ANODE (+) TYP YELLOW TOP LED 2 8 GREEN GREEN TOP LED 1 7 DWN - TOP LED 2 3 ANODE (+) TYP 2 DATE TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.25 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - 13APR2005 Vic Slack/L.A.MAYER CHK 13APR2005 J.WESTMAN APVD 13APR2005 S.FLICKINGER DWN TE Connectivity NAME PRODUCT SPEC 108-1163-2 APPLICATION SPEC - 114-2154 WEIGHT - Customer Drawing SIZE MODULAR JACK ASSEMBLY,STACKED, 2 X 1, 8 POSITION, SHIELDED, - CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 6368011 SCALE 4:1 SHEET 2 OF - 3 REV L 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 BY - RELEASED FOR PUBLICATION 6 5 4 3 2 1 20 REVISIONS ALL RIGHTS RESERVED. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 13.55 2.54 4 PLC THE TOP LED HOLES ONLY FOR 6368011-1,2,3, 4,5,6,8,9 & 1-6368011-0,1,4,5 2.54 TYP 1.27 TYP D D 1.265 1.02 0.08 1.06 24 PLACES 3.25 +0.08 5 -0.05 2 PLACES 18.51 15.49 12.95 2.54 13.971 9.65 2.54 4.698 C 4.698 1.57 0.08 6 PLACES 13.971 9.65 8.89 C 0.41 REF 2.72 2.2 2.72 11.43 13.63 PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE OF BOARD SCALE 18.04 B 4:1 +0.25 -0.13 TOP OF PC BOARD B R0.38 MAX 4 PLACES 27.81 +0.25 -0.13 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: SUGGESTED PANEL CUTOUT DIMENSIONS SCALE 4:1 0.38 mm MATERIAL SEE NOTE 1 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.25 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - 13APR2005 Vic Slack/L.A.MAYER CHK 13APR2005 J.WESTMAN APVD 13APR2005 S.FLICKINGER DWN TE Connectivity NAME PRODUCT SPEC 108-1163-2 APPLICATION SPEC - 114-2154 WEIGHT - Customer Drawing SIZE MODULAR JACK ASSEMBLY,STACKED, 2 X 1, 8 POSITION, SHIELDED, - CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 6368011 SCALE 4:1 SHEET 3 OF - 3 REV L