Transcript
PRODUCT DATASHEET
APXVFW18-C-A20
Cross Polarized Dual Band Antenna, 698-2360MHz, 65deg, 15.3/17.1/17.7dBi, 6ft, VET, 312deg/0-10deg, RET This antenna is an ideal choice for site upgrades and new deployments where additional capacity and increased coverage is required. Only 12 inches wide and 6 feet high, it can be used for 2G, 3G and 4G technologies. This multi-band antenna features superior pattern symmetry and a phase shifter for each radiating dipole providing exceptional patterns at all tilt settings. It is supplied with an integrated and field replaceable AISG 2.0 antenna control unit (ACU) for remote electrical tilt (RET) compatibility. FEATURES / BENEFITS Cross polarization ³dual band version with 4 ports (2x 698-894 MHz and 2x 1710-2360 MHz) One phase shifter per radiating element ³improves radiating patterns Superior X-Pol Discrimination ³improves Rx diversity High suppression of upper sidelobes ³reduces cell interference Variable electrical downtilt ³provides enhanced precision in controlling intercell interference Enhanced tilt range from 3-12 degrees for 698-894MHz and 0-10 degrees for 1710-2360MHz ³ideal for applications in dense areas High reliability ³designed to last in a tower top environment Design incorporates low windload and low weight ³minimizes tower loading
APXVFW Series
Quick and easy to install ³reduces installation time and costs
Technical Features ELECTRICAL SPECIFICATIONS Frequency Range
MHz
698-806
806-894
1710-1850
1850-1990
1990-2170
2305-2360
dBi (dBd)
14.6 (12.5)
15.1 (13.0)
17.1 (15.0)
17.4 (15.3)
17.8 (15.7)
18.1 (16.0)
Horizontal Beamwidth
deg
77
73
68
66
64
57
Vertical Beamwidth
deg
13.7
11.7
6.5
6.5
5.8
5.4
Electrical Downtilt Range
deg
3-12
3-12
0-10
0-10
0-10
0-10
1st Upper Sidelobe Suppression
dB
Front-To-Back Ratio
dB
> 28
> 28
> 28
> 6.5
> 6.5
> 4.8
300
300
300
Gain
18 > 25
> 25
> 28
Polarization
Dual pol +/-45
VSWR
< 1.5:1
Isolation between Ports
dB
3rd Order IMP @ 2 x 43 dBm Cross Polar Discrimination (XPD) ± 60° Impedance
dBc
Maximum Power Input
dB
> 28 typ. > 153 > 10
> 10
> 10
500
500
300
Ohms W
50
MECHANICAL SPECIFICATIONS Lightning Protection
Direct Ground
Connector Type/Location
(4) 7-16 Long Neck Female/Bottom
AISG Standard Dimensions - HxWxD
AISG 2.0 Compliant mm (in)
1829 x 299 x 200 (72 x 11.8 x 7.9)
Weight w/o Mtg Hardware
kg (lb)
24.5 (54)
Survival/Rated Wind Speed
km/h (mph]
240 (150) / 150 (93.2)
Applied Wind Load Standard
DIN 1055-4
Wind Load @ Rated Wind, Front
N (lbf)
412 (93)
Wind Load @ Rated Wind, Max.
N (lbf)
510 (115)
Wind Load @ Rated Wind, Side
N (lbf)
510 (115)
Wind Load @ Rated Wind, Rear
N (lbf)
468 (105)
°C (°F)
-40 to 60 (-40 to 140 )
TESTING AND ENVIRONMENTAL Operation temperature MATERIAL Radome Material/Color
ASA/Light Grey RAL7035
Mounting Hardware Material
Diecasted Aluminum and Galvanized Steel
ORDERING INFORMATION Mounting Hardware
APXVFW18-C-A20
APM40-2
REV: B
All information contained in the present datasheet is subject to confirmation at time of ordering
REV DATE: Oct 4, 2016
www.rfsworld.com Page 1 of 2
PRODUCT DATASHEET
APXVFW18-C-A20
Cross Polarized Dual Band Antenna, 698-2360MHz, 65deg, 15.3/17.1/17.7dBi, 6ft, VET, 312deg/0-10deg, RET Mounting Pipe Diameter
mm (in)
60 - 120 (2.36 - 4.72 )
Mounting Hardware Weight
kg (lb)
3.4 (7.5)
Antenna Array
Antenna Drawing
External Document Links
Notes
APM40 Series Datasheet
For additional mounting information please click "External Document Links" below.
APM40 Series Installation Instructions
APXVFW18-C-A20
REV: B
All information contained in the present datasheet is subject to confirmation at time of ordering
REV DATE: Oct 4, 2016
www.rfsworld.com Page 2 of 2
