Preview only show first 10 pages with watermark. For full document please download

Datenblatt 9361854b, 742113

   EMBED

Share

Transcript

Panel Accessories 2 x Panel Mounting Kit for Panels width 112 mm and 155 mm Use this mounting kit only for Panels with a maximum width of 160 mm. Wind load category: L (Light) or M (Medium) 2 x Panel Mounting Kit 742113 Type No. Contens Material: – Clamp and screws – Nuts and washers Weight 2 x brackets and mounting accessories Hot-dip galvanized steel Stainless steel Approx. 1.6 kg Recommended torque for M8 bolted connections: 20 Nm 90 72±0.3 10 9 118 75 30° 19 64±0.3 38 Ø 9 64±0.3 64±0.3 82.5 82.5 270 936.1854/b Subject to alteration. Configuration without mechanical downtilt Configuration with mechanical downtilt Use the 2 x Panel Mounting Kit together with the following mounting accessories Type No. Description 731651 738546 85010002 85010003 85010060 737978 1 clamp 1 clamp 1 clamp 1 clamp 1 offset 1 downtilt kit Remarks Mast: 28 – 60 mm diameter Mast: 42 – 115 mm diameter Mast: 110 – 220 mm diameter Mast: 210 – 380 mm diameter in combination with the clamps Downtilt angle: depending on antenna height Weight Units per approx. antenna 0.8 kg 1.1 kg 2.7 kg 4.8 kg 1.3 kg 2.3 kg 2 2 2 2 2 1 For a three sector panel arrangement, use the mounting kit type no. 742113 together with the three sector clamp 742213, 742033 or 742034. Three sector clamp 742263 does not match. If a downtilt kit is used, please choose the fitting one from the antenna datasheet. Internet: www.kathrein.de 742113 Page 1 of 1 KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973