Evf-1122s/64

Transcript

Electro-Voice | EVF-1122S/64 EVF-1122S/64 ▪ Coverage Pattern: 60° x 40° Constant Directivity 12-inch Rotatable Waveguide ▪ Passive System: 98 dB Sensitivity, 131 dB Maximum SPL ▪ System Rating: 500 W Continuous, (2000 W Peak) ▪ PI and FG Version are Standard with Gland Nut and Stainless Steel Grille ▪ EN54-24 type B certification 1438/CPD/0283 (Only available in select regions) The Electro-Voice EVF-1122S/64 is a high power, two-way front loaded loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a compact, lightweight package. For high frequencies, the EVF-1122S/64 utilizes the ND2B high output 2-inch titanium compression driver, coupled to a rotatable Constant Directivity 60° x 40° waveguide. For low frequencies, the SMX2121 12-inch woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep 24-dB per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and an HF protection circuit for long term reliability. The EVF-1122S/64 features make it ideal for many fixed-install applications. The trapezoidal enclosure is constructed out of weather-resistant birch and coated with EVCoat for enhanced durability. For protection against outdoor elements, weatherized versions are available (PI and FG). The enclosure is built with 22 M10 suspension points; 20 for single hang (four (4) shoulder eyebolts included) or cluster arrays (optional HRK or VRK kits) and two (2) for single hang with a U-bracket (optional EVF-UB). The innovative input panel provides Phoenix-style connectors (included in all models) and a dual gland nut cover plate (CDG included in PI and FG models). For convenience in temporary installation you may add a dual NL4 type connector cover plate (CDNL4). An external easy to access jumper card is provided with each loudspeaker to assist you in the selection of passive (standard shipping configuration) or biamp operation. An available 70.7/100 Volt internal transformer kit (TK-150) may be easily mounted to the input panel for use in distributed systems. No matter what the application and budget, all these features provide you with the tools to increase flexibility during system design to meet and support your customer’s requirements with fewer items in inventory. EVF and EVH loudspeakers feature precise acoustics and rigging design for easy to configure vertical and horizontal clusters as part of the solutions provided in the EV innovation family. 2 | EVF-1122S/64 Technical specifications Frequency Response (-3 dB): Frequency Range (-10 dB): Rotatable Coverage: Rec. High-pass Frequency: Passive Crossover Frequency: Axial Sensitivity: Max. Calculated SPL: Passive Power Handling: Impedance: Transformer: Standard 50 Hz BW24 Highpass Transformer: 89 Hz High-pass per EN54-24 Spectrum Environmental: 58 Hz – 16 kHz1 49 Hz – 19 kHz Suspension: 1 60° x 40° Dimensions (H x W x D): 65 Hz 1450 Hz 98 dB (1W/1m)1 131 dB1 500 W Continuous, 2000 W Peak2 8 Ω (nominal), 6.0 Ω (min) IEC 60529 IP55 for PI and FG versions (22) M10 threaded suspension points (4) shoulder eyebolts and (4) fender washers (included) 30.26 in x 16.00 in x 16.27 in (768.6 mm x 406.3 mm x 413.3 mm) Net Weight: 63.1 lb (28.6 kg) Shipping Weight: 73.4 lb (33.3 kg) 1. Half-space measurement. 2. EIA RS-426A, tested for eight hours. 3. AES 2-1984, tested for eight hours. 4. Arithmetic averages, 300-1,450 Hz (LF) and 1,450-5,000 Hz (HF). 70 V 100 V Z nom 37.5 W 75 W 130 Ω 75 W 150 W 65 Ω System overview 150 W Do Not Use 33 Ω Block Diagram (biamp): 70 V 100 V Z nom - 50 W 100 W 100 Ω + 100 W 200 W 50 Ω - 200 W 400 W 25 Ω + Passive Limiter + ND2B LF Transducer - SMX2121, 12 in (305 mm) driver LF Axial Sensitivity: LF Max. Calculated SPL: LF Power Handling: LF Impedance: 99 dB (1W/1m) 131 dB HF Max. Calculated SPL: HF Power Handling: + 8 Ω (nominal), 6.3 Ω (min)3 400 W Continuous, 1600 W Peak HF Transducer - ND2B, 2 in (51 mm) diaphragm compression driver HF Axial Sensitivity: - 4 113 dB (1W/1m)4 Block Diagram (passive): Standard shipping configuration 135 dB 8 Ω (nominal), 7.4 Ω (min)3 - HPF HF Impedance: Connectors: Enclosure: Grille: Passive Limiter 40 W Continuous, 160 W Peak Dual four pin 10 AWG Phoenix/ EuroBlock Style Screw Terminal PI/FG versions: CDG Dual Gland Nut Input Panel Cover Included 13-ply weatherresistant birch with EVCoat FG version: 13ply weatherresistant birch with fiberglass finish 16 GA power coated galvanneal with, removable logo PI/FG versions: Stainless steel with hydrophobic cloth + ND2B + LPF + 3 | EVF-1122S/64 Horizontal Off-Axis Frequency Response: Frequency Response and Impedance: 110 100 90 80 100 Sensitivity (dB) 100 Impedance (Ohms) Sensitivity (dB) 110 10 Passive Mode, Half Space 100 1000 80 Impedance 70 50 90 10000 3.16 20000 50 100 Frequency (Hz) 10° Horizontal 20° Horizontal 30° Horizontal 1000 10000 20000 Frequency (Hz) Vertical Off-Axis Frequency Response (Up): Vertical Off-Axis Frequency Response (Down): 110 110 100 100 Sensitivity (dB) Sensitivity (dB) On Axis 70 90 80 90 80 70 50 100 On Axis 10° Vertical Up 20° Vertical Up 30° Vertical Up 1000 10000 On Axis 10° Vertical Down 20° Vertical Down 30° Vertical Down 70 20000 50 Frequency (Hz) 100 1000 10000 20000 Frequency (Hz) Beamwidth: Directivity: 360 Horizontal 30 1000 20 100 50 20 3.6 20 10 10 0 100 1000 10000 20000 Frequency (Hz) Caution! This Electro-Voice loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the ! Directivity Factor (Q) 100 Directivity Index (DI), dB -6dB Beamwidth (degrees) Vertical User’s Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances. 20 100 1000 Frequency (Hz) 10000 1 20000 4 | EVF-1122S/64 Horizontal and Vertical Polar Response (Passive): Polar plots (1/3 octave) 5 | EVF-1122S/64 Dimension Drawing: Certifications and approvals Notice! Acoustic measurement reference axis is 16 in (40.64 cm) up from the bottom and centered horizontally on the grille. EN54-24 type B certification 1438/CPD/0283 (Only available in select regions) Ordering information Compatible System Solutions: EVF-1122S/64-BLK EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, black EVF-1122S/66 60° x 60° Coverage EVF-1122S/94 90° x 40° Coverage EVF-1122S/96 90° x 60° Coverage EVF-1122S/64-WHT EVF-1122S/99 90° x 90° Coverage EVF-1122S/126 120° x 60° Coverage EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, white EVF-1152S/43 40° x 30° Coverage EVF-1122S/64-PIB EVF-1152S/64 60° x 40° Coverage EVF-1152S/66 60° x 60° Coverage EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, PIweatherized, black EVF-1152S/94 90° x 40° Coverage Order number EVF1122S64PBLB EVF-1152S/96 90° x 60° Coverage EVF-1122S/64-PIW EVF-1152S/99 90° x 90° Coverage EVF-1121S 12” Bass Element EVF-2121S 2 x 12” Bass Element EVF-1151S 15” Bass Element EVF-2151D 2 x 15” Bass Element EVF-1181S 18” Bass Element CPS2.12 CPS2.12 Power Amplifier5 EVF-1122S/64-FGW CPS4.5 CPS4.5 Power Amplifier CPS4.10 CPS4.10 Power Amplifier5 EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, fiberglass, white Order number EVF1122S64BLB Order number EVF1122S64WHLB EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, PIweatherized, white Order number EVF1122S64PWLB EVF-1122S/64-FGB EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, fiberglass, black Order number EVF1122S64FBLB 5 5. Contact your sales representative for voltage information. Order number EVF1122S64FWLB 6 | EVF-1122S/64 EVF-1122S/64-BLK HRK-2W EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, black — EN54-24 certified Horizontal rigging kit for EVF & EVH full-range to EVF sub, white Order number EVF1122S64BLK@E EVF-1122S/64-WHT EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, white — EN54-24 certified Order number EVF1122S64WHT@E EVF-1122S/64-PIB EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, PIweatherized, black — EN54-24 certified Order number HRK-2W-LB VRK-1B Vertical rigging kit for EVF, black Order number VRK-1B-LB VRK-1W Vertical rigging kit for EVF, white Order number VRK-1W-LB VRK-2B Vertical rigging kit for EVF & EVH full-range to EVF subs, black Order number EVF1122S64PIB@E Order number VRK-2B-LB EVF-1122S/64-PIW VRK-2W EVF 12" / 2-way Full-range Systems; SMX woofer & ND2B driver (500 W cont.) 60° x 40°, EVCoat, PIweatherized, white — EN54-24 certified Order number VRK-2W-LB Order number EVF1122S64PIW@E Accessories CSG Single gland nut cover kit for EVA, EVF & EVH Order number CSG-LB CDG Dual gland nut cover kit for EVA, EVF & EVH Order number CDG-LB CDNL4 Dual NL4 cover kit for EVA, EVF & EVH Order number CDNL4-LB TK-150 Transformer kit for EVF & EVH, 150W / 70V Order number TK-150 Black EVF U Bracket Mounting bracket for EVF. black Order number EVF-UB-BLK-LB White EVF U Bracket Mounting bracket for EVF. white Order number EVF-UB-WHT-LB HRK-1B Horizontal rigging kit for EVF, black Order number HRK-1B-LB HRK-1W Horizontal rigging kit for EVF, white Order number HRK-1W-LB HRK-2B Horizontal rigging kit for EVF & EVH full-range to EVF sub, black Order number HRK-2B-LB Vertical rigging kit for EVF & EVH full-range to EVF subs, white 7 | EVF-1122S/64 Represented by: Germany: Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany Bosch Security Systems, Inc. 12000 Portland Avenue South Burnsville MN 55337 USA www.electrovoice.com © Bosch Security Systems 2014 | Data subject to change without notice Document Number F.01U.290.882 | Vs07 | 07. Jan 2014