Transcript
4454-1/4E 05.04.2006 15:11 Uhr Seite 3 C
M
Y
CM
MY
CY CMY
K
Complete Print System for 114 mm Thermal Paper
• Efficient 114 mm thermal printer system in plastic housing for installation
• Interfaces: RS232/422/485/TTL, Centronics, USB, Ethernet, IR, Bluetooth® wireless technology
• Easy Paper Loading, up to 45 m paper length
• Interface and print parameter setting per GeBE OPD-Menue®
• Simple integration into front panels and desktop housings
• Options: Clock with alarm register; serial interface for connection of bar code scanner, magnetic card readers, or serial keyboard; paper rewinder
• used e.g. at the POS; for log printing for measuring tasks or documentation of manufacturing data • Text and graphics printing with high resolution (203 dpi)
• Power supply for stationary or energy-saving mobile operation
http://www.oem-printer.com/gpt-4454 Probedruck
Pictures: Changes of housing desing reserved
GeBE Doc. No.: SYKI-E-533-V1.0
GPT-4454
4454-2/3E 05.04.2006 15:17 Uhr Seite 1 C
Eas
M
Y
CM
MY
CY CMY
K
Simplistic handling: pap
y Lo adi
ng Open lid using l
The Easy-Paper-Loading makes exchanging the paper very easy. When the paper supply chamber is opened, the lid automatically leads the print roll out of the printer mechanism.
r
ev
er
e remaining mov pa p Re e
Plastic Hou Environmental audits accordin EN60950, EN60068-2-6 (vibrat
shock resistant
Stationary and Mobile Applications Stationary applications for the GPT-4454 are (among others): Receipt printing at the POS, billing systems at the hotel reception, log printing for measuring tasks, and documentation of manufacturing data in production machines. For mobile applications, the printer can be integrated in a housing worn on a belt together with a matching battery, which can be recharged through a simple network adapter.
Connection to State-of-the-Art Communication Technology The following interfaces (in part separate adapters) are available for the printer system module MAXI: • serial RS232/422/485/TTL • parallel Centronics • bus interfaces USB and Ethernet • infrared: GeBE IR and IrDA • Bluetooth® wireless technology
EMV guidelines 89/336/EWG, EN55022 1998, EN55024 2003
rob
Small Space Required for Installation Due to its shallow installation depth, the GPT-4454 is ideal for integration into front panels and desktop housings. A simple cutout is sufficient to mount the printer with screws from the outside. In desktop housings efficient use of valuable space for other components inside the housing, as the plastic printer housing extends beyond the side of the chassis wall. Optionally, a cover to protect the electronics
from improper exposure can be mounted on the back. The data line and the power supply are carried through lockable connectors below.
(diagonally) can be printed as graphics with full resolution. The robust drive transports the 60 to 80 µm thick paper from a supply roll with a maximum diameter of 60 mm and a paper length of about 40 m.
Excellent Print Results The GPT-4454 prints text and graphics in excellent quality on a width of 104 mm with up to 50 mm per second and 203 dpi onto 114 mm wide thermal paper. With 832 horizontal pixels, it is ideal for documentation purposes, since the monitor formats VGA (lengthwise) and XVGA
Energy-Saving Power Supply The printer system is operated internally with operating voltages between 5 VDC and 8.5 VDC. The controller board can be equipped with a DC/DC converter that expands the operating range to 10-18 VDC
GeBE Elektronik und Feinwerktechnik GmbH • Beethovenstr. 15 • 82110 Germering • Germany
Probedruck
4454-2/3E 05.04.2006 15:17 Uhr Seite 2 C
M
hl Pu s
MY
CY CMY
K
id closed
St tP
r int i
w ert ne paper r I ns ol l
ng
The paper roll is inserted in the container, and the lid is closed. No threading of paper is required.
CM
ar
per exchange made easy
Y
Special Requests Fulfilled Flexibly
sing MAXI
vibration resistant
ng to tion) and EN60068-2-27 (shock)
GeBE OPD-Menue® for Convenient Setting of the Print Parameters The parameters controlling the printout, such as interface, baud rate, character format, or blackening of the paper can be set and permanently stored through two buttons on the operating console with the help of the GeBE OPD-Menue®. The print function itself provides the visualizing of the menu guide and settings.
GeBE is not a mass producer of standard printers. The priority is always customer fulfillment – even for small order quantities. For OEM customers, GeBE offers optimal adaptation to the individual requirements. In hardware as well as in software, GeBE’s modular print systems are designed highly flexible. In the production of custom product versions, the high flexibility of the company is demonstrated through short delivery times, among other things. Hard- and software are developed by GeBE, allowing the adaptation of the products to the design vision of the future user. Custom-design keyboard tape and housing in special colors (250 units minimum) are stored until production, therefore keeping the starting cost at the beginning of a custom series to a minimum. Standard tasks on the software side are adaptations or additions of character sets. Beyond that, changes such as command set emulations, are possible.
Flexible Positioning of the IR Transceiver and Low Voltage Guideline 73/23/EWG, EN60950-1:2001
Operating Status Signal The current operating or charging status, such as error“ or ” battery being charged“ ” is signaled through LEDs.
The IR transceiver for the standard version is located on the operating console. Should a specific mounting situation not allow this configuration, a separate transceiver with cable connection can be plugged in at the controller and positioned at any location.
bust (operation with 12 V batteries) or to 18-36 VDC (operation with 24 V batteries), allowing for operation with car batteries. For mobile applications, the printer is operated with a 5-cell NiMH rechargeable battery. Its charging process is managed by the controller. The sophisticated power management provides a highly efficient use of the battery power, because the controller will automatically switch to a power-saving operating mode, whenever the printing situation allows.
Peripheral Expansions The system controller provides internal access to a serial SPI interface that can connect to auxiliary boards with various functions. A buffered real time clock with wake-up function through an alarm register, a magnetic card reader for three tracks, and a serial RS-232 interface with transparent bi-directional data traffic to the host are all included in the standard version.
Particularly mobile applications can benefit from the transparent transfer of data from a mobile bar code scanner, a card reader, or an additional keyboard through the wireless interfaces of the print system. The motor of a paper rewinder can be controlled on request.
Telefon: ++49 (0) 89/894141-0 • Fax: ++49 (0) 89/8402168 • E-mail:
[email protected] • web: www.oem-printer.com
Probedruck
4454-1/4E 05.04.2006 15:11 Uhr Seite 2 C
M
Y
CM
MY
CY CMY
K
Technical Data
Paper width / thickness:
thermal paper 113,5 ± 0,5 mm, max. 60 - 80 g/m2
Roll diameter:
max. 60 mm (app. 45 m of printed paper at 60 g/m2 )
52 (69, 92 and 118) characters/line
Barcode:
Code 39, 2 of 5 int, EAN13, EAN8 (others on request)
Interfaces:
RS232 or TTL, Centronics, USB, Infrarot, Bluetooth® wireless technology
Data compression:
(PCL) factor app. 3:1 (for graphic commands); PC-compatible; Windows driver
Supply voltage:
4,5-8.5 VDC, 10-18, or 18-36 VDC (8-40 VDC max. < 1 sec )
Batteries:
battery pack 5x NiMH cells, 1600 mAh; Option für OEM: Li-Ion-battery
Charger:
unregulated plug-in power supply 7.5 V, 900 mA
Max. current during printing:
can be limited by command to max. 0,7 A - 6 A (adaptation to operating voltage)
Standard power consumption:
online Idle-Mode: typ. 5 mA; sleep-Mode: typ. 25 µA; Power-Off-Mode: < 1 µA
Power consumption BT:
online Idle-Mode: typ. 30 mA; sleep-Mode: typ. 1,5 mA; Power-Off-Mode: < 1 µA
GeBE Elektronik und Feinwerktechnik GmbH • Industrial OEM printers • printer mechanisms • keyboards • terminals • product development • manufacturing
Power consumption USB: online Idle-Mode: typ. 10 mA; sleep-Mode: typ. 25 µA; Power-Off-Mode: < 1 µA
Beethovenstr. 15 82110 Germering Germany
Magnetic card reader **): ISO3554, 3 tracks 0 °C to 50 °C (-10 °C to +60 °C with GeBE HQ paper) 10% to 80% rel. humidity, no moisture condensation
MTBF:
50 km printed paper (on thermal paper specified by GeBE)
Dimensions / installation depth:
119 x 68 x 143 mm / app. 47 mm
Weight:
app. 500 g incl. paper roll
Certification:
Environmental audits according to EN60950, EN60068-2-6 (vibration) and EN60068-2-27 (shock); EMV guideline 89/336/EWG, EN55022 1998, EN55024 2003 and Low Voltage Guidelines 73/23/EWG, EN60950-1:2001
11985 GPT-4454-V.24-DC/DC10-18
Phone: ++49 (0) 89/894141-0 Fax: ++49 (0) 89/840 2168
8
e-mail:
[email protected] printer: www.oem-printer.com keyboards: www.tastaturen.com Options
Bluetooth®
GeBE-IR-protocol
Centronics
IrDA
TTL
RS422/485
RS232
Clock with timer function
Batch file TINIT/LOGOs
Interfaces
OPD-Menue® setting
IR communications LED
DUO LEDs
Battery charging with GeBE power supply
Li-ION battery
Functions
Battery pack 5x NiMH
Fixed voltage 4.5 – 8.5 V
Fixed voltage 18 – 36 V
Fixed voltage 10 – 18 V
Power
Number of buttons
GeBE Serie GPT-4454 Art.Nr. The GPT-4454 series is equipped with the controller board GCT-4482 (various options available)
EEPROM KB
Standard Product Versions
Environment:
Paper rewinder
Character sets:
Expanded SPI Bus
up to 50 mm/second
Ethernet
104 mm (203 dpi)
Print speed:
USB
Effective print width:
2
**)
**)
**)
**)
2
**)
**)
**)
**)
12372 GPT-4454-V.24-DC/DC18-36
8
12041 GPT-4454-V.24
8
**)
2
**)
**)
**)
12085 GPT-4454-Ir
8
**)
2
**)
**)
**)
12086 GPT-4454-Ir-BT
8
**)
2
**)
**)
**)
12088 GPT-4454-USB
8
**)
2
**)
**)
**)
12349 GPT-4454-Centr.
8
**)
2
**)
**)
**)
Probedruck
**) = Option
The GeBE logo is a registered trademark of the GeBE Elektronik und Feinwerktechnik Gmbh. All other brands named in this catalogue are properties of the respective companies. Errors and changes reserved. The technical data given are non-committal information and do not represent any assurance of cerain features. Our terms of payment and delivery apply. Copyright © 2006 GeBE Elektronik und Feinwerktechnik GmbH. All rights reserved.
