Transcript
Plan PlanBinders Binders Hang-A-Plan filing systems allow large amounts of plans and drawings to be well organized and easily accessed using only a minimal amount of storage space. Hang-A-Plan systems offer a range of Australian made mobile trolleys, wall racks and plan binders to accommodate A0, B1, A1, A2, A3 and A4 size plans and drawings. There are many trolley and binder options to suite different budgets and user requirements.
Benefits and Advantages • • • • • • •
Hang-A-Plan binders are the heart of the filing system. The binders have a strong super-continuous aluminium clamp which holds the plans securely and firmly together for storage on a Trolley or Wall Rack. Hang-A-Plan binders feature a 3-piece clamp design for a strong and even grip and a centred handle for better load balance and carry comfort. Choose between the time saving QUICKFILE plan binder, or the NEW economical GENERAL plan binder.
Save up to 80% on floor space Save time with faster filing & retreival Patented QUICKFILE binder system Easy access to all drawings Quality construction Made in Australia 10 Year guarantee on binders
QUICKFILE Binders Save time and money by taking the hassles out of filing. The patented QUICKFILE binder allows you to remove and replace plans up to twice as fast thanks to the alignment extension and quick release cam leavers.
Quick and Easy Use
Alignment Extension
One side of the clamp is extended. This improvement allows plans to be placed on the extension and easily guided into the clamp.
Hang-A-Plan Front Loader Trolleys permit quick and easy unobstructed access to all drawings. Patented QUICKFILE plan binders have innovative improvements to allow plans and drawings to be filed or retrieved up to twice as fast when compared to other plan binders.
Quick Click Filing
Cut your filing times in half. The unique Quickfile cam levers open and close the clamp with a simple “click”. The lever base locks the lever in the closed position. The levers twist for easy clamp adjustment.
Saves Time and Money
Compared to a traditional drawer system, the Hang-A-Plan vertical filing system saves up to 80% on floor space and cuts filing and retrieval time by over 75%.
Longer Length Clamp
The QUICKFILE binder is designed to hold USA sizes: 36”, 30” & 24” as well as the DIN A0, B1 & A1 sheets.
10 Year Guarantee
Every binder is hand assembled and tested to meet strict quality standards. If any components prove defective under normal use, they will be replaced free of charge.
Indexing
The index label holder makes it easy to add and replace reference labels on each binder.
Australian Made
Hang-A-Plan products are designed and manufactured in Melbourne, Australia.
Reviews - QUICKFILE
Judge’s comments from Australian Design Awards 2005: “This is most definitely an improvement upon existing options / products” “The mechanism is good and an excellent way to store documents. An improved and functional system, the design is robust.” “The appropriateness is quite well thought out as the need to store large format sheets with quick access and mobility is still very real in many design studios and architecture offices.”
GENERAL Binders
The new economical GENERAL binder has a strong 3-part anodised aluminium clamp with wing nuts, a comfortable centred carry handle and self-adhesive index labels. Available in A1 or A0 size.
Racks Trolleys Racks& & Trolleys
CAD Mobile Project file The space saving CAD Mobile Project File efficiently stores A2, A3 and A4 size printouts. The trolley is designed to roll under a desk or workstation for quick access and storage. Organise drawings on up to 16 clamps with index tabs. The trolley comes supplied with 8 clamps.
Quick Access Clamps
The unique CAD clamps cut filing and retrieval time in half. Each high quality aluminium clamp uses patented QUICKFILE technology enabling the clamp to be opened and closed with the “click” of a single lever. The clamps have a tough black powder coated finish and are supplied with index holders and labels. Extra clamps can be purchased in sets of 4 (D011) A1 Premium Front Loader Trolley (D055) with Systems Shelf (D056) & QUICKFILE Clamps (D200B)
General Front Loader Trolley (D060) & GENERAL Clamps (D102A)
Hang-A-Plan Front Loader trolleys and wall racks provide clear and easy access to all drawings. Binders may be pivoted and removed from the front of the trolley without any obstruction. The trolleys are made from high strength steel frames finished in a satin black scratch resistant powder coat. The top channel, used for suspending binders, features an extra hard wearing nylon coated finish.
Premium Trolley
The Premium trolley has a 25 binder capacity and features a fifth wheel for improved mobility and increased load capacity. Available in two sizes; a large trolley for up to A0 size binders and a smaller trolley for up to A1 size binders. A separate steel ‘Systems Shelf’ is available for premium trolleys. This add-on shelf provides extra storage space above the trolley for associated files.
Space Saver Trolley
The trolley is made from strong powder coated steel frames and is designed to fit under desks. The trolley comes flat packed and is very simple to assemble with a single tool that is provided.
Capacity
Each CAD clamp will hold A2 - A4 size sheets and have a 60 sheet capacity. The trolley will hold upto 960 sheets on 16 clamps.
General Trolley
The General Trolley is a lower cost option and has a 20 binder capacity. Available in A1 or A0 Size.
Wall Rack 1200
The Wall Rack 1200 has a 10 binder capacity and is height adjustable to suit plans of any length. The double rack design alows binders to be inserted on the left or right side. The Wall Rack has an extra hard wearing nylon coated finish and will hold all Binder sizes.
Front Loader Wall Rack WR1200 (D065)
Self Assemble
For convenience of on-site transport, all Hang-A-Plan racking systems are supplied knocked down for self assembly with the aid of the one simple tool provided.
www.hang-a-plan.com
A3/A2 CAD Mobile Project File (D010)
PRODUCT SPECIFICATIONS REFERENCE NUMBERS
QUICKFILE Binders
GENERAL Binders
Trolleys
Wall Rack
CAD Mobile Project File
DIMENSIONS mm Length
Clamp Length
Length (Inches)
Sheets
Clamp Width
Weight
D202B QUICKFILE Black D201B QUICKFILE Black D200B QUICKFILE Black
957 806 660
914.4 762 609.6
36” 30” 24”
100 120 150
25mm 25mm 25mm
9kg 8kg 7kg
Size
Code
Colour
Length
Clamp Length
Sheets
Clamp Width
Weight
A0
D102A GENERAL
Silver
902
902
100
25mm
9kg
A1
D100A GENERAL
Silver
605
605
150
25mm
7kg
Size
Code
Model
Colour
Height
Width Length
Depth
Sheets
Binders
Weight
A0 A1 A0 A1
D054 D055 D056 D060 D061
Premium Premium Shelf Only General General
Black Black Black Black Black
1330 1010 15 1320 990
665 665 670 550 550
800 730 285 800 730
1250 2750 1000 1000
25 25 20 20
125kg 125kg 100kg 100Kg
Size
Code
Model
Colour
Height
Width Length
Depth
Sheets
Binders
Weight
All
D065
WR1200
Black
100
140
300
1200
10
120kg
Size
Code
Description
Colour
Height
Width Length
Depth
Sheets
Binders
Weight
A2
D010
Trolley with Black 8 Clamps
662
485
410
960
16
80kg
Length
Clamp Length
Length (Inches)
500
445
18”
Size
Code
A0 B1 A1
A2
D011
Model
Model
Set of 4 Clamps
Colour
Black
Worldwide Patents and Registered Designs
Hang-A-Plan trolleys and binders are protected by invention and design patents. Australia: AU 775542 | AU 154421 | AU 147773, New Zealand: NZ520266 USA: 6,862,780 | USD443,399 S | D496,965 | US2003101550, EUROPE: EP1248909 | 000131495-0001
Hang-A-Plan is Made in Australia By:
Arnos Australia Pty Ltd
33-35 Keysborough Ave, Keysborough, VIC 3173 Tel: +61(0)3 9583 2254 Tel (Aus): 1800 635 216 Fax: +61(0)3 9583 8124 Email:
[email protected]
MAXIMUM CAPACITY
Your Hang-A-Plan Agent: Quality ISO 9001
Arnos Systems Europe
86, rue de Seine, F.94405, Vitry-sur-Seine, Cedex, France Telephone: 33-1-46 81 3303 Fax: 33-1-45 73 2437
www.hang-a-plan.com
Clamp Width
60
15mm
1.2kg
