Transcript
MONITOR 12/NEO SPEAKER SYSTEMS Designed and Manufactured by ITEC Tontechnik und Industrieelektronik GesmbH 8200 Laßnitzthal 300 Austria / Europe
MONITOR 12/NEO
If you are looking for a stage monitor that doubles as a full-range sound reinforcement speaker for smaller events, is capable of authentic sound reproduction at extreme volumes and is both rugged and easy to transport, then the Monitor 12 has the answers! Available in two versions, the Monitor 12 units feature either tripod mounts for mobile use or are supplied with an attractive wall/ceiling mounting bracket and suspension eyelets for fixed installation.
Fields of application Handy and easy (through the use of neodymium magnets), but yet very stable and with a robust surface coating; with carrying handles, flanged bushings or mounting points; a performance-optimized crossover network including a loudspeaker protection circuit; able to reproduce authentic sounds at highest pressures: All these were requirements for our internal development department. Additionally even stylish packaged in a stage monitor housing. Now we proudly present: Die neue ITEC MONITOR 12/Neo Two enclosure and equipment variants are available: 1) The mobile version – designed as a monitor for live events; can be used on stage or as compact full-range unit Sound reinforcement box for events; ideal for music and voice, with outstanding, clear voice reproduction. 2) The installed version – intended for fixed installation in multi-purpose rooms, halls, sport stadiums, night clubs, bars, restaurants or theme parks.
2 www.itec-audio.com
MONITOR 12/NEO
MONITOR 12/NEO
Performance features - Low-impedance or 100 volt High performance sound reinforcement speaker, Bass reflex system, Configuration: 12 „neodymium-Cone Speaker, 1“ neodymium CD Horn, linear authentic sound; high efficiency: 101dB/1W/1 m. Ideal for full-range sound reinforcement tasks Ball-throwing proof speaker grille (Optional weatherproof equipment on request) Nominal pressure: 300 Watt / 8 ohm or 120 watts / 100 Volts (250W/100V on request) Colour PU coated
Versions Mobile Equipped with plastic hard-shell hand grips, 36 mm tripod mount top and bottom, and speakon spea connections.
Standard equipment
SPEAKON connections on reverse side of Monitor 12 MONITOR 12/NEO
Black
Special finishes
Installed Equipped with eight M10 suspension points for mounting with ropes or chains, incl. four M10 eye bolts as well as a mounting bracket for rigid ri installation.
Standard equipment
Tripod mount on underside of Monitor 12
Mounting bracket
Eight built in M10 suspension points incl. four M10 eye bolts www.itec-audio.com
3
MONITOR 12/NEO - SPECIFICATIONS 413,1 mm 406,7 mm
576 mm
MODELS
MONITOR 12 / 8 ohms
MONITOR 12 / 100 V / 120 W
Mobile
Installed
Mobile
Installed
300 W r.m.s.
300 W r.m.s.
120 W r.m.s.
120 W r.m.s.
Rated acoustic pressure dB/1 W/1 m 101
101
101
101
Max. acoustic pressure
126 dB
126 dB
122 dB
122 dB
Frequency response -6 dB
68 Hz- 22 kHz
68 Hz- 22 kHz
68 Hz- 22 kHz
68 Hz- 22 kHz
Driver
1 Stk. TT 12”
1 Stk. TT 12”
1 Stk. TT 12”
1 Stk. TT 12”
1 × CD waveguide, 1”
1 × CD waveguide, 1”
1 × CD waveguide, 1”
1 × CD waveguide, 1”
Dimensions (W x H x D)
406,7 x 576 x 413,1 mm
406,7 x 576 x 413,1 mm
406,7 x 576 x 413,1 mm
406,7 x 576 x 413,1 mm
Weight
17,5 kg
17,5 kg
23 kg
23 kg
Enclosure
Housing made of water-resistant laminated plywood, ball-throwing proof speaker grille shock-resistant polyurethane (PU) coating, incl. mounting bracket (installed version)
Finish
PU-coated, black
Rated load
TEST CHART: ITEC MONITOR 12
All information without guarantee. Subject to technical changes.
4 www.it www.itec-audio.com tecc-a -aud udio ud io.c io .c com
ITEC- Tontechnik und Industrieelektronik GesmbH, A-8200 Lassnitzthal 300 Tel.: +43 (0)3133 / 3780-0,
[email protected], www.itec-audio.com
MONITOR 12/NEO
