Transcript
IMPORTANT SAFETY INSTRUCTIONS READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS. • This active speaker system must be connected to a mains (AC) outlet to work properly and must be earthed to operate safely. • Ensure that correct AC mains voltage and socket - fitted with a real ground connection - are available before powering up the unit.
• Check mains power cable and plugs before switching on the equipment. If the mains cable and/or plug are damaged, replace the whole cable immediately. For your own and other people’s safety, never repair or modify the mains power cable. Dispose of the defective cable properly for waste and recycling purpose.
• After following the instructions outlined above, if your powered speaker fails to function, please contact your vendor. Under no circumstances should the cabinet be opened. Leave all servicing to qualified personnel. • Electrical appliances must never be used in conditions of high humidity or heat. To prevent any risk of fire or electric shock, never spill or splash liquids on the amplifier. Should this happen, unplug the power cable from the mains outlet and switch off the powered speaker immediately.
3
1 3 9 12 10
2 4 5 7 6
1
2
13
9 12 10
4 5 7 6 8
13 11 14
11 14
8
• May we draw your attention to the instructions printed on the rear panel of the cabinet.
• Make sure that the cabinet is placed or installed in such way that it can never injure people
15
• Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke machines.
16 16
15
110-120 220-240
WARNING
!
AC VOLTAGE turn plate if not correct and change value of fuse
Exposure to extremely high noise levels may cause permanent hearing damage. Please use this amplified speaker responsibly for you and your neighbourhood..
CLEANING
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
MARKING & CONFORMITY
• The CE mark on this product means it conforms to the EMC Directive (2004/108/CE), CE marking Directive (93/68/EEC) and Low Voltage Directive (2006/95/EC). • The “Crossed-out Wheelie Bin” is to draw your attention to the WEEE (Waste Electric & Electronic Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
• “RoHS compliant” means this device conforms to the (2002/95EC) Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as: Mercury, Lead, Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Ethers (PBDE).
FUNCTIONS
1- MP3 player / FM RADIO & Bluetooth controls. By pushing the mode button you can choose to use the USB /SD card player, listen radio or use the Bluetooth media transfer, or neither. Before being able to use the FM radio you have to do a scan of all available radio stations, you can do this by pressing the button till the scan starts. It will take a couple of minutes before the radio has stored all stations. Once finished you can choose your preferred radio station by using and . In Bluetooth mode the display will show a blinking - - - - - till you make a connection from your smartphone. To do so go into your phone settings, go into Bluetooth, look into the list of unknown available Bluetooth units for the speaker, connect. Once connected the display on the speaker will show - - - - - -. Then allow your music player in your smartphone to connect with Bluetooth. Open the MP3 volume to hear the result. MODE
Switch between
USB / SD
FM RADIO
Play/Pause
Press long for starting scan
Repeat Last
Previous preset
Next
Next preset
BLUETOOTH
2- VOLUME 1: Volume of Microphone / Line inputs 3- VOLUME 2: Volume of line inputs 14- MP3 VOLUME: Volume of USB / SD player, FM radio & Bluetooth
4- MIC INPUT: ¼” phone jack connector to connect microphone or high impedance sources such as guitars or keyboards.
5- LINE /MIKE switch: In up position both inputs are line level inputs. In down position they become Microphone level . 6- MIC INPUT: XLR connector to connect microphone (low impedance balanced) 7- AUX INPUT: 3,5mm mini stereo input jack
8- LINE INPUT: RCA left & right channels input. Allows you to connect an external audio device such as CD player or Recording device line level .
User’s manual
11- LINE OUT XLR connector to connect an amplifier or another powered speaker cabinet in series. Wiring of the 3-pin connector: Pin 1= Shield ; Pin 2 = Positive (Hot); Pin 3 = Negative (Cold).
MULTI PURPOSE AMPLIFIED SPEAKER CABINETS
12- EQUILIZER HIGH: Controls the amount of high frequencies in the output signal. (-12dB to + 12dB)
13- EQUILIZER LOW: Controls the amount of low frequencies in the output signal. (-12dB to + 12dB) 10- CLIP LED: LED warning indicator. This LED comes on when the input signal reaches distortion. Reduce the input level in order to reduce the distortion. 9- POWER INDICATOR: LED indicator light for when unit is receiving mains power. 15- POWER SWITCH : This switch turns on/off the power
Model Description Amplifier system Cross over Max rated power Max SPL Specifications:
Special features
Pole insert diameter Cabinet dim. Cabinet weight Package Voltage
Woofer Tweeter Freq Resp Sensitivity Impedance
WxDxH WxDxH
PMS8A170 UBTR
PMS10A170 UBTR
8″2way plastic active speaker analog, Class A/B passive 85W RMS 170W peak 91dB 8" 30oz 1,5"VC 1"Ti.Diap.Driver 8Ω 30Hz-20KHz 90dB±2dB 4Ω bluetooth USB/SD (folder MP3 player) remote control radio FM + presets 35mm 25x20x38,5cm 6kg 29,5x24,5x43,5cm manual switch 110-120V/ 220-240V
10″ 2way plastic active speaker analog, Class A/B passive 85W RMS 170W peak 90dB 10" 30oz 1.5"VC 1"Ti.Diap.Driver 8Ω 30Hz-20KHz 90dB±2dB 4Ω bluetooth USB/SD (folder MP3 player) remote control radio FM + presets 35mm 31,5x25x49cm 8,5kg 35,5x29,5x54,5cm manual switch 110-120V/ 220-240V
Features and Specifications are subject to change without notice.
EMD Music - 04/2015
16- AC CONNECTOR & voltage switch: Attention ! The fuse cover plate acts as switch between 110-120V 60Hz and 220-250V 50Hz. The orientation is important! Make sure that your local voltage corresponds with the voltage indication above the arrow. If not, turn the plate and use the appropriate fuse.
2-WAY, POWERED SPEAKERS PMS8A170 UBTR & PMS10A170UBTR
