Transcript
Product Specifications HHTT65A HHTT65A--F-M
8-port sector antenna, 4x 1710–2170 and 4x 2490–2690 MHz, 65° HPBW, AccuRET® compatible l
Provides a future-ready antenna solution with flexibility to reassign antenna, for example GSM 1800 service to 2.6GHz LTE at a later date
l
RF technology flexible—suitable for LTE, UMTS, CDMA, GSM, AWS, WiMAX, and other applications from 1.7–2.7 GHz
l
Fully independent RET control, at same size as standard quad port antenna
l
Excellent RF pattern control over the full operating band and tilt range for desired coverage and interference containment
OBSOLETE
This product was discontinued on: June 1, 2017 Replaced By HHTT65A-F-4X2
8-port sector antenna, 4x 1710–2170 and 4x 2490–2690 MHz, 65° HPBW, factory attached AccuRET®
Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Front-to-Back Ratio at 180°, dB CPR at Boresight, dB CPR at Sector, dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance
1710–1880 16.6 68 6.8 0–12 15 26 16 12 28 28
1850–1990 17.3 67 6.4 0–12 15 25 17 12 28 28
1920–2170 17.5 67 6.1 0–12 14 25 16 11 28 28
2490–2690 17.6 62 5.1 0–12 14 24 18 9 28 28
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
-150 300 ±45° 50 ohm
-150 300 ±45° 50 ohm
-150 300 ±45° 50 ohm
-150 250 ±45° 50 ohm
Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB
1710–1880 16.5 ±0.6 0 ° | 16.4
Gain by Beam Tilt, average, dBi Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB
1850–1990 16.9 ±0.4 0 ° | 17.1
1920–2170 17.0 ±0.5 0 ° | 17.0
2490–2690 17.5 ±0.8 0 ° | 17.6
6 ° | 16.6
6 ° | 17.0
6 ° | 17.2
6 ° | 17.7
12 ° | 16.4
12 ° | 16.7
12 ° | 16.8
12 ° | 16.9
±6 ±0.3 16 23 16 13
±5 ±0.4 16 24 18 14
±5 ±0.5 16 24 17 13
±4 ±0.3 17 25 19 8
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 1, 2017
page 1 of 3 September 18, 2017
Product Specifications HHTT65A HHTT65A--F-M * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
General Specifications Operating Frequency Band
1710 – 2170 MHz
Antenna Type
Sector
Band
Single band
Performance Note
Outdoor usage
|
2490 – 2690 MHz
Mechanical Specifications RF Connector Quantity, total
8
RF Connector Quantity, high band 8 RF Connector Interface
7-16 DIN Female
Color
Light gray
Grounding Type
RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material
Low loss circuit board
Radome Material
PVC, UV resistant
RF Connector Location
Bottom
Wind Loading, frontal
515.0 N @ 150 km/h 115.8 lbf @ 150 km/h
Wind Loading, lateral
121.0 N @ 150 km/h 27.2 lbf @ 150 km/h
Wind Loading, rear
562.0 N @ 150 km/h 126.3 lbf @ 150 km/h
Wind Speed, maximum
241 km/h
|
150 mph
Dimensions Length
1390.0 mm
Width
305.0 mm
Depth
118.0 mm | 4.6 in
Net Weight, without mounting kit 16.5 kg
|
| |
54.7 in 12.0 in
36.4 lb
Packed Dimensions Length
1530.0 mm
Width
410.0 mm
|
16.1 in
Depth
261.0 mm
|
10.3 in
Shipping Weight
25.4 kg
56.0 lb
|
|
60.2 in
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 1, 2017
page 2 of 3 September 18, 2017
Product Specifications HHTT65A HHTT65A--F-M
Included Products 600899A-2
— Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket
set and one bottom bracket set.
* Footnotes Performance Note
Severe environmental conditions may degrade optimum performance
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 1, 2017
page 3 of 3 September 18, 2017
