Transcript
Rapid2+™ Clamp Product Sheet
Rapid2+ Clamp Features and Benefits • • • •
Quick and easy mounting system for pitched roofs Reduces mounting time Offered pre-assembled and ready to use Optional grounding conductor clamp assembly
For improved installation ease and cost reduction, Schletter now offers the Rapid2+ Grounding Middle Clamp. The Rapid2+ Clamp is the quickest option for mounting modules to date, that includes integrated grounding as a standard feature. Pre-assembled as a standard stock item, the Rapid2+ Clamp is available in a variety of sizes, accommodating the industry’s various module thicknesses. As with all Schletter components and systems, we offer a voluntary 10-year warranty.
Mount the roof hook following appropriate mounting guidelines for the roof hook (see Mounting brochure)
For more information on this, or other Schletter products, please contact us at (520) 289-8700 or visit www.schletter.us.
ility War ra rab Du
y nt
10 YEARS
Affix mounting rail with appropriate hardware.
Position Rapid2+ clamps over modules, click and secure with included screw. Use bit TORX TX-40 to tighten the clamp.
Adjust the height-adjustable Rapid2+ end clamp to the module height, snap it in and screw it or use fixed end clamps. © Schletter Canada Inc. • 3181 Devon Drive • Windsor, Ontario N8X 4L3 • Tel: +1 (519) 946 3800 • Fax: +1 (519) 946 3805 E-mail:
[email protected] • www.schletter.ca • Update 12/2010
1 1 //48
Rapid2+™ Clamp Product Sheet e
Rapid2+
i
Roof Hooks
g material thickness
b
h material thickness
c
Pre-assembled bar using welded, VA quality steel offered in a variety of sizes to accommodate various roofing types. 101001-000
d
adjustable
a
Dimensional drawing to the charts
f
Rapid2+ 45
(430 800)
mm inches
a 45 1.77
b 110 4.33
c 116 4.57
d 60 2.36
e 150 5.91
f 35 1.38
g 5 0.20
h 6 0.24
i 30 1.18
g 5 0.20
h 6 0.24
i 30 1.18
f 35 1.38
g 5 0.20
h 6 0.24
i 30 1,18
e 150 5.91
f 35 1.38
g 5 0.20
h 6 0.24
i 30 1.18
e 150 5.91
f 35 1.38
g 5 0.20
h 6 0.24
i 30 1.18
f 35 1.38
g 6 0.24
h 8 0.31
i 30 1.18
Comparable con: Eco-S 100004-000, 100004-001, 100009-000
101001-001 (430 801)
Rapid2+ 45 V Vertical Rail Mounting mm inches
a 45 1.77
b 110 4.33
c 116 4.57
d 60 2.36
e 150 5.91
f 35 1.38
Comparable to: Eco-S 100004-000, 100004-001, 100009-000
101002-000
Rapid2+ 35
(430 802)
1.38”/35 mm Bracket Height for Low Rise Tile. mm inches
a 35 1.38
b 110 4.33
c 116 4.57
d 60 2.36
e 150 5.91
Comparable to: Eco-S 100006-000
101003-000 (430 803)
Rapid2+ 55
2.17”/55 mm Bracket Height for High or Large Tiles mm inches
101004-000 (430 804)
a 55 2.17
b 110 4.33
c 116 4.57
d 60 2.36
Rapid2+ Universal Universally adjustable mm inches
a b 40-54 110 1,57-2.13 4.33
c d 116 60 4.57 2.36
Comparable to: Universal 100001-000
101005-000 (430 805)
Rapid2+ Max 1.38”x 0.31” /35 x 8 mm Bar for Heavy Snow Loads mm inches
a 45 1.77
b 110 4.33
c 116 4.57
d 60 2.36
e 150 5.91
Comparable to: VaMax 100010-000, 100010-001, 100011-000, 100011-001
101006-000
Rapid2+ Max V
(430 806)
Vertical Rail Mounting mm inches
a 45 1.77
b 110 4.33
c 116 4.57
d 60 2.36
e 150 5.91
f 35 1.38
g 6 0.24
h 8 0.31
i 30 1.18
Comparable to: VaMax 100010-000, 100010-001, 100011-000, 100011-001
4 22 // 8
© Schletter Canada Inc. • 3181 Devon Drive • Windsor, Ontario N8X 4L3 • Tel: +1 (519) 946 3800 • Fax: +1 (519) 946 3805 E-mail:
[email protected] • www.schletter.ca • Update 12/2010
Rapid2+™ Clamp Product Sheet
Aluminum Module Rapid2+ Clamps— Middle and End Clamps Assembled
Includes Torx M8 screw with serration on the lower side of the screw head and anti-friction coating 131003-000
Middle Clamp: Rapid2+ 30 – 39
(430 810)
Universally applicable for module heights from 1.18 – 1.54 inches / 30 – 39 mm
131003-001
Middle Clamp: Rapid2+ 40 – 50
(430 811)
Universally applicable for module heights from 1.57 – 1.97 inches / 40 – 50 mm
End Clamps: Rapid2+, Various Sizes Available Select module height from list below. Height of module is last two digits of part number, in millimeters 1.18 inches / 30 mm 1.22 inches / 31 mm 1.26 inches / 32 mm 1.30 inches / 33 mm 1.34 inches / 34 mm 1.38 inches / 35 mm 1.42 inches / 36 mm 1.46 inches / 37 mm 1.50 inches / 38 mm 1.54 inches / 39 mm 1.57 inches / 40 mm 1.61 inches / 41 mm 1.65 inches / 42 mm 1.69 inches / 43 mm 1.73 inches / 44 mm 1.77 inches / 45 mm 1.81 inches / 46 mm 1.85 inches / 47 mm 1.89 inches / 48 mm 1.93 inches / 49 mm 1.97 inches / 50 mm
131001-030 131001-031 131001-032 131001-033 131001-034 131001-035 131001-036 131001-037 131001-038 131001-039 131001-040 131001-041 131001-042 131001-043 131001-044 131001-045 131001-046 131001-047 131001-048 131001-049 131001-050 (430830 - 430850)
131002-000
End Clamp: Rapid2+ 30 – 39 mm
(430 812)
Universally applicable for module heights from 1.18 – 1.54 inches / 30 – 39 mm
131002-001
End Clamp Rapid2+ 40 – 50 mm
(430 813)
Universally applicable for module heights from 1.57 –1.97 inches / 40 – 50 mm
135002-000
Grounding Middle Clamp: Rapid2+ 30 – 39 mm Assembled
(430 820)
Similar to 131003-000, however with grounding function
135002-001
Grounding Middle Clamp: Rapid2+ 40 – 50 mm Assembled
(430 821)
Similar to 131003-001, however with grounding function
© Schletter Canada Inc. • 3181 Devon Drive • Windsor, Ontario N8X 4L3 • Tel: +1 (519) 946 3800 • Fax: +1 (519) 946 3805 E-mail:
[email protected] • www.schletter.ca • Update 12/2010
3 3 //48
Rapid2+™ Clamp Product Sheet
Mounting Suggestions for the Rapid2+ Clamp We recommend to not use a tightening torque of more than 10.5 ft-lbs when fastening the clamp. Percussion drills as well as extremely long Allen wrenches MUST NOT BE USED to mount the Rapid2+ clamps. When using cordless drills, be sure that the tightening torque falls within the recommended range as each drill has different settings. If the tightening torque is too high, the module frame and the clamps could become damaged. Note: A impact driver has a much higher torque range than a standard drill making it unsuitable.
Do not use over-long Allen wrenches.
Tighten to 13 ft-lbs.
Do not use impact driver.
Do not use ratchet wrench.
Material
Roof hooks and screws: Quality steel 1.4301
Structural Analysis
Structural analysis according to the current national standards (IBC 2006, 2009). Information attachments based on structural analysis regarding the dimensioning of the number of required fastening locations. For this reason, charts and dimensioning programs at your disposal. Attention to structal safety should always be followed.
4 44 // 8
© Schletter Canada Inc. • 3181 Devon Drive • Windsor, Ontario N8X 4L3 • Tel: +1 (519) 946 3800 • Fax: +1 (519) 946 3805 E-mail:
[email protected] • www.schletter.ca • Update 12/2010
© Schletter Inc., 2010, I400032USA, V2
Technical Data
