Transcript
SWM PRODUCTS
AD14 Active Diplexer
S I T U AT I O N Some local broadcast signals are not carried by DIRECTV® but are desired by the homeowner with an AU9S single wire multi-switched dish.
SOLUTION SONORA model AD14 combines and amplifies the signals from a local free to air antenna and SWM output.
RELATED CONSIDERATIONS Model HD14 is available for adding local broadcast to DISH® systems. Model LA141R may also be used to further amplify local broadcast and SWM output signals.
DESCRIPTION Model AD14 is an active diplexer that combines DIRECTV® single wire multi-switch signals and local broadcast signals.
F E AT U R E S
-31 dBm 99 110 101 103
• Indoor/Outdoor . . . . . . . . . . . . . . . . . . Die-cast Aluminum • DC, 22 kHz and 2 MHz passing . . . . . . . . . . . . . . . . low loss • VHF/UHF gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 dB
20 dBmV ANT
DBS
• SWM Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 dB
AD14
• Power passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Amp
RECEIVER
A P P L I C AT I O N N O T E S An integrated AU9S single line multi-switch dish signal is combined with a local antenna in model AD14.
-21 dBm 34 dBmV @ 100 ft -30 dBm +30 dBmV SWM PI
SWS-8
Power for the AU9S and AD14 is provided by the SWMPI power inserter. The amplified combined signal is split with model SWS-8 to multiple rooms.
119
-43 dBm +15 dBmV @ 200 ft -59 dBm +6 dBmV SWS-2
At each receiver, the signal is split with model SWS-2 to the SWM tuner and the ATSC (local) tuner.
ATSC IN FTM
HD H20 RECEIVER
Contact: Sonora Design Associates t 805.644.8913 t www.sonoradesign.com t
[email protected]
SWM PRODUCTS 20 dBmV ANT
119
-31 dBm
SWM8
DBS
Legacy 1
AD14
SWM1 PWR SWM2
Legacy 2 Legacy 3
RECEIVER
99º/101º 18V
13V
OFF-AIR 103º/110º /119º 18V 22k
13V Flex Flex 22k Port1 Port2
-21 dBm 34 dBmV
SWM PI
-30 dBm 29 dBmV @ 100 ft
Within the box model AD14 combines and amplifies the SWM8 output with the local antenna output.
SWS-4
-39 dBm 21 dBmV
MPOE 4
-56 dBm 10 dBmV @ 200 ft
1
-43 dBm 18 dBmV @ 50 ft SWS-2
SWS-2
ATSC IN
ANT IN
FTM
SAT IN
H20 HD RECEIVER
D12 RECEIVER
-52 dBm 12 dBmV @ 150 ft
3
-47 dBm 16 dBmV @ 100 ft SWS-2
ATSC IN FTM
SAT1 SAT2 ATSC IN IN IN
HD H20 RECEIVER
After 100 feet of RG-6, the SWMPI is inserted to power the AU9, AD14 and SWM8. The SWMPI output is split with model SWS-2. The signal is sufficiently strong to travel 200 feet of RG-6 to room 4.
2 RECORDING PROGRAM
SWS-2
Model SWMBOX-8H contains (1) SWM8 switch, (1) AD14 and (1) SWMPI to simulate an integrated AU9S single wire dish.
HR20 HD DVR
A SWS-2 splitter is used to split the combined signal to and ATSC local receiver and the DIRECTV® SWM tuner.
AD14 Active Diplexer
99 110 101 103
S P E C I F I C AT I O N S Specifications ..............................Typical ..............QC Limit Gain 2 MHz .......................................................-2 dB ........................ -3 dB 54 MHz ....................................................14 dB ........................ 12 dB 806 MHz .................................................11 dB ...........................9 dB 950 MHz .................................................10 dB ...........................9 dB 1850 MHz ...............................................10 dB ...........................9 dB Maximum Input (8) SWM transponders ........................................................-26 dBm (8) off-air NTSC.................................................................. +20 dBmV (16) off-air ATSC ............................................................... +20 dBmV Return Loss Input Return Loss ...................................12 dB ........................ 10 dB Output Return Loss ................................12 dB ........................ 10 dB Pass band Flatness Any 24 MHz band .............................0.1 dB ...................... 0.2 dB Any 6 MHz band ............................. 0.05 dB ...................... 0.1 dB 54 to 806 MHz .................................... ± 2 dB .......................± 1 dB Noise Figure ............................................... 4 dB ...........................5 dB Power Specifications Voltage...................................................................... 12 to 29 VDC Current .................................................. 45 mA ......... 60 mA @ 29V
DIRECTV® SWM8 Frequency Plan 0
1
2
3
4
5
6
7
8
9 5 0 .MH z................................................................... . . . . . . . . . . . . . . . . . . . 2150
DIRECTV® receivers operating in the SWM mode are assigned a frequency slot to receive signals from the single wire multi-switch. The first frequency band is for communication between the SWM and the receivers. The remaining slots are assigned as receivers join the network.
Mechanical Specifications Dimensions ................................................................. 4” x 3.5” x 7/8” Weight .......................................................................... 0.7 lb (0.3 kg) Master Carton (44 units) ..............................................11” x 9” x 9” Master Carton Weight ................................................... 21 lb. (9.5 kg) Environmental Specifications Operating Environment: ...................................Indoor/Outdoor Ambient Temperature ......................................... -30º C to +70ºC
Contact: Sonora Design Associates t 805.644.8913 t www.sonoradesign.com t
[email protected]
