Transcript
ST-218XS
2x 18” high excursion neodymium passive touring subwoofer |
ACOUSTIC SPECIFICATIONS Power Handling Program Peak Nominal Impedance Average Sensitivity Calculated Maximum SPL / 1m Program Peak
102 dB @ 1w/1m 135 dB continuous 138 dB 141 dB 30 - 1200 Hz
Manufacturing Consistency
± 3 dB from 30 to 300 Hz
Nominal Directivity (-6dB)
Omnidirectional
Recommended Amplifier
≤ 3000 w @ 4Ω
Crossover Preset EQ’s Low Frequency Driver
LPF 70 - 125 Hz 24dB/Oct BW/LR No, active usage only with external electronic crossover, Fane recommended DSP TBC Fane Transducer, 8Ω impedance with 60mm peakpeak excursion, Neo motor structure, 18” (460mm) diameter, 5” high temperature voice coil on glass fibre former
| 2x 18” high excursion neodymium passive touring subwoofer
APPLICATIONS ST-218XS subwoofer is suitable for bass reinforcement for main PA systems, touring or permanent installations in medium sized venues to stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres.
ADDITIONAL SPECIFICATIONS Flying Hardware
35mm Aluminium pot with M20 screw fitting
Connectors
2pcs NEUTRIK Speakon NL4
FEATURES • 25Hz usable frequency • 2400W RMS power handling (EIA 8 hours Standard) • Equipped with premium Fane long excursion Driver with Neo magnet structure • Void-free birch plywood cabinet, tongue and groove assembly • Touring grade HardTex coating with black matt finish • Complete line of hardware accessories • DSP preset support on associated electronics • Quick release caster plates with 2x swivel castor 4” wheel 2x swivel
8x M8 points with internal metal brackets
Pole Mount
Cabinet
castor with locking 4” wheels
4Ω
Frequency Response (-6dB)
Recommended Crossover
ST-218XS
2400 w RMS (EIA 426A standard) 4800 w 9600 w
Finish Cabinet Size (HxWxD) Shipping Carton Size (HxWxD) Weight
Optional Accessories
CNC made with tongue and groove assembly, 18 mm and 24 mm void-free birch plywood, exterior grade Proprietary HardTex coating, black matt 1236 x 590 x 689 mm TBC 91 kg net 101 kg gross TBC
ST-218XS
2x 18” high excursion neodymium passive touring subwoofer |
ARCHITECTURAL SPECIFICATIONS The subwoofer shall be passive, consisting of two 18” (460mm) direct
Steel 316L with 200 hours coating per ASTM-B117. The finish shall be
radiating reflex loaded low frequency transducer with high excursion
a black matt multi layer HardTex water based painting with hardness
ability. The frequency response shall be 35 to 1200Hz in half space with
higher than 75Hv. The front of the enclosure shall be protected by a black
less than ± 3dB variation. Power handling shall be 2400W RMS, 9600W
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
peak by EIA 426A standard (8 hours pink noise). Average wideband
transparent grille. Dimensions shall be (HxWxD) 1236 x 590 x 689 mm
(40-150Hz) efficiency on axis shall be 102dB/1W/1m and maximum SPL
and Weight 91kg.The enclosure shall be fitted with quick release castor
shall be 135dB continuous / 141dB peak. Nominal impedance shall be
plates with 2 x swivel castors 2 x swivel castors with break, castors will
4Ω. The stackable enclosure shall be of a void free multi-laminate birch
have 100mm wheels. The loudspeaker shall be the Fane Pro Audio ST-
ply construction with sealed internal bracing, metal 35mm pole mount
218XS.
and threaded M20 inserts for suspension. The screws shall be Stainless
© 2013, Fane International Ltd. Fane operate a policy of continuous product development and reserve the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev. 290914
