Tt08-a

Transcript

TT08-A PRECISION MONITOR Applications - Compact voice and music reinforcement systems - Front and under-balcony fill - Small theatres and convention centers - Portable and installed audio-visual systems - Surround sound for concert halls, night clubs and houses of worship Features - 750 Watt power switching amplifiers - Wide, constant directivity, coverage angle - High power 64 mm coil neodymium woofer - 44 mm coil titanium compression driver - High quality analog input board - Soft limiter and RMS protection - Maximum output per size available on the market The TT08-A is by far the smallest member of the TT+ family, whilst being the most flexible and powerful tool in its class. From live sound to playback and monitoring, corporate events and broadcast studios. Though remarkably compact and lightweight, the TT08-A offers an incredible maximum sound pressure level of 128dB, making it suitable for use as either a single, primary loudspeaker or within multicabinet horizontal and vertical arrays. Its performance efficiency is almost 3dB higher than many larger 10” speaker systems and indeed comparable to many 12” systems. Applications include AV presentations; small- to medium-sized main sound reinforcement systems; fill, delay, and effects systems; under-balcony coverage; and distributed systems The TT08-A low-mid frequency section employs an 8-inch neodymium magnet cone driver, while the high-frequency section utilizes an efficient 1-inch exit, 44mm diaphragm compression driver. Each transducer has been specifically designed for the application. The woofer provides large excursion and very light weight. The voice coil is a 64 mm design, best compromise between power handling and low mass. The compression driver features a new pure titanium dome. Special ribs on the dome provides maximum flatness and extension in very high frequencies. The TT08-A on-board amplifier features 750 watt switching power supply module, 500 watt low frequency digital amplifier module, 250 watt high frequency digital amplifier module extra capacitor bus able to sustain the voltage for 100 ms burst signals. The total available power supply power is 750 watts and can be distributed to the 2 final amplifier sections. Each amplifier section has a very high maximum output power capability in order to provide, when necessary, maximum output bursts in a specific frequency range. The input section provides In/Out XLR connectors, system sensitivity control, side to side or floor coupling correction switch, 4 status LEDs. The high quality analog input board provides linear phase crossovers, system equalization, fast limiter, RMS limiter and configuration control. The AC panel features In/Out Powercon connectors, On/Off switch. The cabinet is in marine baltic birch plywood, coated with high resistance epoxy paint. The mechanical suspension and orientation is very easy thanks to two 3-points fly tracks. The cabinets features a steel pole mount cap and two different angles for near field or long field monitoring. ACOUSTICAL SPECIFICATIONS Frequency response: Max SPL: Horizontal coverage angle: Vertical coverage angle: Compression driver: Midrange: Woofer: 65 Hz- 20 Khz 128 dB 90° 60° 1.0” neo, 44 mm voice coil 8” neo, 64 mm voice coil INPUT SECTION Input signal (Impedance): Input/Output connector: Input sensitivity: bal/unbal xlr - 2 dBu / + 4 dBu PROCESSOR SECTION Crossover frequencies: Protections: Sensitivity control: Limiter: High pass: Controls: 1700 Hz thermal, hf yes fast limiter side/floor coupling AMPLIFIER Power supply: High frequencies: Mid frequencies: Low frequencies: Cooling: Connection: switching 750 Watt D / 250 Watt D / 500 Watt convenction powercon in/out PHYSICAL Height: Width: Depth: Weight: Cabinet: Hardware: Handles: Pole mount cap Colour: 430 mm (16,93”) 270 mm (10,63”) 303 mm (11,93”) 11,4 kg (25,13 lbs) baltic birch 2 x fly tracks, pole mount yes Black TT08-A Beamwidth vs. Frequency Response 110 360 Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave) 330 300 100 Coverage Angle (Deg.) 270 dB SPL 90 80 240 210 180 150 120 90 70 60 30 60 20 100 1000 Frequency (Hz) 0 100 10000 Directivity Index and Q 1000 Frequency (Hz) 10000 Normalized Horizontal off-axis Response 100 20 5 18 0 16 -5 Total Q 10 10 8 6 Directivity index Di, dB 12 Attenuation in dB 14 -10 -15 -20 4 -25 2 1 100 0 1000 Frequency (Hz) -30 100 10000 0 0 -5 -5 -10 -15 -20 -30 100 1000 Frequency (Hz) 10000 Normalized Vertical off-axis Response. Below the box 5 Attenuation in dB Attenuation in dB Normalized Vertical off-axis Response. Above the box 5 -25 Horizontal ±10 degrees Horizontal ±20 degrees Horizontal ±30 degrees Horizontal ±40 degrees Horizontal ±50 degrees Horizontal ±60 degrees -10 -15 -20 Vertical +10 degrees Vertical +20 degrees Vertical +30 degrees Vertical +40 degrees Vertical +50 degrees Vertical +60 degrees -25 1000 10000 -30 100 Vertical -10 degrees Vertical -20 degrees Vertical -30 degrees Vertical -40 degrees Vertical -50 degrees Vertical -60 degrees 1000 10000 TT08-A Horizontal 1/3 Polar Plot 315 250 200 0° 330° 30° 300° 300° 60° 270° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 240° 150° 2500 2000 1600 30° 300° 270° 240° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 150° 60° 270° 0 90° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 150° 210° 30° 300° 120° 180° 10000 8000 6300 0° 330° 60° 240° 120° 210° 5000 4000 3150 30° 90° 0 150° 180° 270° 0 0 120° 210° 300° 90° -48 -42 -36 -30 -24 -18 -12 -6 -48 -42 -36 -30 -24 -18 -12 -6 240° 0° 330° 60° -6 -12 -18 -24 -30 -36 -42 -48 -6 -12 -18 -24 -30 -36 -42 -48 180° 0° 0 90° 0 150° 210° 60° 270° 0 120° 180° 330° -48 -42 -36 -30 -24 -18 -12 -6 240° 120° 210° -6 -12 -18 -24 -30 -36 -42 -48 30° 300° 90° 0 330° 60° 270° 90° 0 30° 1250 1000 800 0° 630 500 400 0° 330° 0 120° 150° 210° 180° 180° Vertical 1/3 Polar Plot 315 250 200 90° 120° 60° 150° 30° -48 -42 -36 -30 -24 -18 -12 -6 0 210° 300° 2500 2000 1600 60° 150° 180° 210° 0 330° 300° 240° 270° 5000 4000 3150 60° 210° 0 330° 300° 240° 270° 60° 150° 0° -48 -42 -36 -30 -24 -18 -12 -6 10000 8000 6300 90° 120° 30° -6 -12 -18 -24 -30 -36 -42 -48 300° 270° 180° 0 0 330° 240° 150° 0° -48 -42 -36 -30 -24 -18 -12 -6 -48 -42 -36 -30 -24 -18 -12 -6 210° 90° 120° 30° -6 -12 -18 -24 -30 -36 -42 -48 -6 -12 -18 -24 -30 -36 -42 -48 270° 90° 0 0° 0 300° 240° 30° 180° 0 330° 270° 120° -48 -42 -36 -30 -24 -18 -12 -6 210° 330° 240° -6 -12 -18 -24 -30 -36 -42 -48 60° 150° 0° 0 1250 1000 800 90° 120° 30° 180° 0° -6 -12 -18 -24 -30 -36 -42 -48 60° 150° 180° 0 630 500 400 90° 120° 30° 180° 0° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° TT08-A CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS (ALSO KNOWN AS “A&E SPECIFICATIONS”) The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification. 2.02 Design Configuration LF Sub-section MR Sub-section HF Sub-section precision monitor 8” neodymium woofer, 64 mm voice coil 1,0” neodymium, 44 mm voice coil 2.03 Acoustical Proprieties Nominal dispersion angle: Axial frequency range: 90° x 60° 65Hz-20kHz PART 2 PRODUCTS 2.04 Physical Properties 2.01 Approved Manufacturer/Product A. RCF, Via Raffaello 13, 42100 Mancasale, Reggio Emilia, Italy. B. Model number: TT08-A Cabinet: Rigging inserts: Color: Grille: Baltic birch Black Custom perforated steel grille with open-cell poly fiber backing Input Connectors: Dimensions (H x W x D): Weight: xlr 430 x 270 x 303 mm (16.93” x 10.63” x 11.93”) 11,4 kg (25,13 lbs.) 2.05 Accessories M10 M20 pole mount for TT22-A or TT25-A speakers ACS 260 Steel speaker floor stand, load capacity up to 60 kg ACS 140 Steel speaker floor stand, load capacity up to 40 kg AC DS4X Kit 4 hook kit for suspending fly track bar. AC EB4X Kit including No. 4 shouldered 0.39 inch eye bolts 85 [3.35"] 430 [16.93"] 125 [4.92"] 200 137.5 [5.41"] 92.8 [3.65"] AC PM M20 800 132.5 [5.22"] 400 147.5 [5.81"] 302.8 [11.92"] RCF SpA Italy: tel. +39 0522 274 411 fax +39 0522 232 428 www.rcfaudio.com e-mail: [email protected] RCF UK Sales Office: tel. +44 870 626 3142 e-mail: [email protected] 270 [10.63"] RCF France Sales Office: tel. +33 6 07501800 e-mail: [email protected] RCF Germany Sales Office: tel. +49 2203 925370 e-mail: [email protected] RCF USA Inc.: tel. +1 (603) 926 4604 e-mail: [email protected]