Transcript
UCIT BASIC-LIVE 2 CAMERA Vehicle Video Recorder Installation Manual
!
2015 JUN V 1.1
Table of Contents A. Features………………………………………………………………. 1 B. Specifications………………………………………………………….2-3 C. Notices……………………………………………….…………………4 D. What’s in the Box/Tools Required……………………………………5 D. Structure of Product…………………………………………………..6-7 E. Dimensions …………………………………………………..………. 8 F.
Installation Guide ………………………………………………..….. 9-11
!
A. Features 1. Suitable for all personal vehicles i.e taxi, bus, trucks etc. 2. Small size, easy installation and dismount, it does not affect
the driver's line of sight. 3. Insert the SD card and power on to start recording without
additional operating. 4. Simultaneously records interior and exterior condition. 5. Recordings are time and date stamped for easy review 6. Records driving condition, sound, G-Sensor and GPS
data. 7. Front view angle approx. 120 degrees. Back view angle
approx. 170 degrees. 8. Records track of driving routes which can be shown on
Google Map when we playing the video. 9. Micro SD SanDisk memory card Class 10 or above required. 10. G-sensor sensitivity can be adjusted according to road
situations. When a strong shock is detected, system will start emergency recording and keep the files without being overwritten. 11. 3G/4G Live Streaming Capability
B. Specifications Item / Specification Chipset H.264 image compression chip Sensor Device: Forward facing lens: 720p CMOS Sensor Backward facing lens: VGA CMOS Sensor. View Angle Outside vehicle approx : 120 degrees Inside vehicle approx : 170 degrees Voltage Use 5V±5%, 1.5A Cigarette lighter adapter. The machine needs 4.7v to start. Operating Temp -15°C~+55°C (Inside Vehicle). Storage Device Micro SD Card (16GB/32GB/64GB) Class 10 or above SD Card Required Recording Frame Forward facing lens: 1280x720; Highest resolution: 30fps/25fps (NTSC/PAL) Backward facing lens: 640x480; Highest resolution: 15fps/15fps (NTSC/PAL) Auto record when system is powered up; backward facing lens can be disabled by settings in software menu. Recording Content Date, time, video, sound, G-sensor data, GPS data.
Recording Format Specific format for software player. Microphone Built-in high sensitivity single microphone for automatic voice adjustment. Time Setup Auto-calibrated by GPS signals. If GPS is not available, the built-in clock will be used. G-Sensor Internal 3D G-Sensor. Out Device .
(a) TV-Out (1 Vp-p composite video output, 75 ohms), Video Output format: NTSC / PAL alternative.
.
(b) Force Record Button: For emergency recording. Gleams in night time.
.
(c) Red light: Recording indicator. In emergency recording, it flashes more frequently.
.
(d) Green light: Flashing: Searching GPS signals. Light on : GPS positioning ready
Note: When IR turns on, the LED light will be dimmer.
C. Notices .
(a) The GPS positioning speed will be influenced by solar film of the front windshield, weather or other environment factors.
.
(b) Starting and closing time of infrared will be subject to light intensity, the installation location, front windshield and other factors.
.
(c) Day and night mode has a delay for about 30 seconds. Night mode will be priority when powered on.
.
(d) Memory card formatted by using the playback software. This may be done for you already.
.
(e) System must be installed in an area that windshield wipers can reach to ensure the clarity of the recorded video.
.
(f) Please do not plug the power in both micro-USB sockets. The system might get damaged.
.
(g) If you do not use the player to format memory card, the system will be forced to format the entire memory card and then start recording.
.
(h) The machine itself has a distinction between NTSC or PAL. Video output to the monitor with corresponding screen system.
.
(i) Please make sure the SD Card is unlocked (slider bar on side) before writing or reviewing video data. Otherwise it will not work.
.
(j) The machine itself has a distinction between NTSC or PAL. Video output to the monitor with corresponding screen system.
.
(k) Please make sure the SD Card is unlocked (slider bar on side) before writing or reviewing video data. Otherwise it will not work.
D. What’s in the Box !
Standard: Camera System Hardwire Kit (Battery Backup/Charge Guard) Cigarette lighter adapter (If requested) Suction cup bracket with cups, Bracket holder and Adhesive mount option Optional: (a) Micro SD card (16GB/32GB/64GB/128GB)
Add On: 3G/4G Dongle for Live Streaming with Micro to USB Adapter
E. Tools Required: • • • • • • • • • • • • •
Power Drill Volt Meter Wire Crimpers Wire Strippers Electrical Tape Zip Ties Wire Connectors (Installer’s Choice ex.T-tap, ring connector, fuse taps) Extra wire (Shouldn’t need but just in case) Screwdrivers (flat head and philips) Self Tapping Screws 3M Double Sided Trim Tape Auto trim removal tool Flashlight
F. Structure of Product
6 1
2
3
4
5
1. Force Recording Button Recording Indicator 2. Recording Indicator 3. GPS Indicator 4. IVR LEDS 5. Light Sensor 6. Backward Facing Lens
Structure of Product (Continued on next page)
1
2
3
4 5
1. Forward Facing Lens 2. Video Out
4. DC5V(1) Power cable Port 5. Micro SD
3. DC5V(2) 3G/4G Dongle Port *Please do not plug the power in both micro-USB terminals. The system can be damaged!
G. Dimensions UNIT:mm
H. Installation Guide
*NOTE: If you have any issues or questions in regards to installation don’t hesitate to contact Support at
[email protected] or Call us at: 888-286-9829 and press 6 for Support
1. Make the bracket face upward.
2. Assemble the suction cups.
3. Set up the device in the proper position.
4. Adjust the viewing angle.
Installation Guide continued on next page…
*If you have UCIT Basic (No Live Stream) Skip Steps 5 & 6* 5. Plug 3G/4G Dongle into DC5V (1) Socket. Mounting the 3G/4G Dongle on to the TOP of the camera system: Step 1: Route the USB cable through the grooves on the suction cup bracket. Step 2: Plug Dongle into Female USB port. Step 3: Adhere dongle to Camera with LOGO FACING UP WITH CLEAR VIEW OF SKY. (3M double sided trim tape recommended) 6. Plug the Power Cable into DC5V (2) Socket.
7
7. Wire Schematic: Yellow: Power Blue: Ignition Signal Black: Ground Step 1: Hardwire to vehicle according to schematic above. (extend wire if needed) Step 2: Use electrical tape to conceal exposed wires once connected. Test Ignition to insure proper connection. Step 3: Conceal Charge Guard/Battery Backup box and wires. Step 4: Plug in Longer Black Cable to Camera. (DC5V 2)
Installation Guide continued on next page…
8. When the power is successfully connected, the IVR LED will be lit for 10 seconds.
9. Force Record Button light is also on when power is successfully connected.
10. Green light is GPS. This light will flash when GPS is positioning, Light will be on and solid when GPS is ready.
11. Red light is recording. Flashing signifies recording, fast flashing occurs in emergency mode or force record.
12. Force Record Button: When pressed, the red light (recording) will flash rapidly. In night time situations the Force record light will come on as an indicator.
13. Installation Complete!
