Untitled - Sinclair Technologies

Transcript

Ant Typ Freq Range Enviro Rating Environmental Rating S=Standard duty H=Heavy duty U=Ultra duty - Freq Split 40=data antenna (440) 41=data antenna (441) 50=yagi (250, 350) 60=radaflector (260, 360, 460) 69=collinear omni (369) 70=cellular/panel (470) 72=civil aviation 79= 9 dBd gain, 7 phasor collinear omni 80=phasor collinear omni (480) 81=corporate feed collinear omni (481) 82=mobile 1/2wave 83=mobile 5/8wave 88=phasor collinear omni (488) 89=short phasor collinear omni (489) 90=wide-band collinear omni (490) 97=phasor collinear omni (497) 00=excaliber mobiles (500) 12=2-bay exposed dipole (212, 312) 14=4-bay exposed dipole (214, 314) 14=4-bay enclosed dipole (414) 15=yagi (415) 17=low-gain omni-directional (217) 18=8-bay exposed dipole (218, 318) 19=9-bay enclosed dipole (419) 20=collinear omni (320, 420) 21=excaliber mobiles (221, 321) 21=collinear omni (421) 22=2-bay exposed dipole (222) 23=coil collinear omni (323) 24=4-bay exp. dipole (224) 25=marine omni (225) 26=economy yagi 27=corner reflector (227) T1=Tetra band 1. Covers at least 380-400MHz T2=Tetra band 2. Covers at least 410-430MHz TB=Covers both Tetra bands, 380-430MHz 6=2400 - 2500 8=4900 - 5000 28=corner reflector (228) 29=coil collinear omni (229, 329) 30=tetra panel (330) 32=2 phasor element, 3 dBd gain 33=phasor collinear omni (233) 35=2-bay exposed dipole (235, 335) 38=omni (238) Fn=Where n=(1-99) designating the freq. split code 5=1000 - 2000 Antenna Series 01=ground plane (101, 201, 301, 401) 02=corner reflector (302, 402) 03=3 element yagi (203, 303) 06=6 element yagi (206, 406) 07=7 element yagi (307) 10=1-bay exposed dipole (210, 310) 11=2-bay enclosed dipole (411) Frequency Split FX=No frequency splits exist or anticipated Configuration 2=Dual bay. Single input cable 4=Four bay. Single input cable D=Dual array. Two separate input cables L=Low profile M=Marine version (gen. 156-162.5 MHz) Q=Quad array. Four separate input cables R=Radome T=Triple array. Three separate input cables X= Cross Polarized (Pannel Antenna) C= Circularly Polarized (Pannel Antenna) V= Vertically Polarized (Pannel Antenna) Config 4=600 - 999 Ant Series Freq. Range (MHz) 1=0 - 100 2=100 - 299 3=300 - 599 Antenna Type C=Collinear omni D= Exposed dipole E=Enclosed dipole G=Ground plane I=In-building M=Mobile P=Single polarity panel R=Radome-encl, yagi/l.p./etc. T=Transport, low profile (excal) V=Corner or circular reflector X=Dual polarity "slant 45" panel Y=Yagi S=Sinclair Sinclair PIM Rating Conn ( Elec Elev Tune Freq Mounting Configuration B=Bottom mount (a.k.a. Top Mount). C=Centre mount E=End mount I=Inverted S=Side mount U=Universal (Could be mounted in more than one of the above-mentioned configuration, depending on the type of antenna). Ff=Where f = (0300 - 9995), designating the centre frequency (1/2MHz increments) in MHz with 1 decimal point. Example: For a SC229 antenna ordered with centre frequency of 138.5 MHz, the "Ff" designator will be: F1385 F0=Untuned. To be tuned by the Customer. Tune Frequency Panels and other sectored ant's only. P2=1/2 W (fixed-pattern exposed dipoles and whips only P3=3/8 W (fixed-pattern exposed dipoles only P4=1/4 W (fixed-pattern exposed dipoles only P5=5/8 W (mobile whip antennas only) PA=Field adjustable pattern, or beamwidth PC=Circular polarized PS=Cross polarized, or Slant nn=Azimuth beamwidth in degrees where nn=(30-99). W = Welded Structure Gain G3 = 3 dB G5 = 5 dB G6 = 6 dB G8 = 8 dB Electrical Elevation Dnn=Electrical downtilt in degrees where nn = (00 - 10) Unn=Electrical uptilt in degrees where nn = (00 - 10) Pattern or Wavelength Connector BF=BNC female BM=BNC female DF=7/16 DIN female DM=7/16 DIN male NF=N female NM=N male SF=SMA female SM=SMA male TF=TNC female TM=TNC male UF=UHF female UM=UHF male PIM Rating L=Enhanced PIM rating S=Standard PIM rating Pattern Mount Gain Misc. Options Sturct Finish Issued Date: 06-28-2007 Revision 3 Special Assembly Identifier Five alphanumeric characters, "E" followed by four digits. Presence of an "E-number" indicates that the product is a "special assembly". Occasionally the customer supplied unique drawing number or part number may be used in place of the E number. See "Special Assemblies" for details. This portion of the name will (of course) be omitted for all standard/stocked and standard/ non-stocked products TGR= Color finish – gray teflon CWH= Radome material color – white CGR= Radome material color – gray TBU= Color finish – blue teflon EBK= Color finish – black epoxy paint EBU= Color finish – blue epoxy paint EWH= Color finish – white epoxy paint EGR= Color finish – gray epoxy paint MABK= Color finish- Military type III black anodizing PBK= Color finish – black polyurethane paint PBU= Color finish – blue polyurethane paint PWH= Color finish – white polyurethane paint PGR= Color finish – gray polyurethane paint PSB= Color finish – shadow bronze paint TBK= Color finish - black teflon TWH= Color finish – white teflon CGO= Color finish - gold chromate CCC= Chromate Conversion Coating Finishing Options ABK= Color finish – black anodizing ABU= Color finish - blue anodizing AGO= Color finish - gold anodizing Miscellaneuos Options BC= Bird cap Cx= Where x = (0 - 99) designating cable length (in feet) if other than standard. This code must not been used for ordering jumper cables. CG= Coast guard HP= High-power version (special assembly: should be assigned an E-number instead?) IC= Integrated ice-guard version (special assembly: should be assigned an E-number instead?) LM= Less mast LS= Integrated lightening spike version LV= Low-VSWR version (Note: special assembly: should be assigned an E-number instead?) SSC= Staneless Steel Clamps - - Spec Assembly Proto X=Prototype ) RM2(AA-W)(BB)(X)(Y)(C) Non-Expandable Receiver Multicoupler (100-299 MHz) Option Code Description (C) Output Connector Option B BNC Female * note that input connectors are always N female (Y) Power Supply Option 1 2 3 4 5 6 7 8 9 10 115 VAC 220 VAC 12 VDC 24 VDC 48 VDC 115 VAC CE 220 VAC CE 220 VAC option 220 VAC & 24 DC Stdby option 12 VDC termination block (X) Amplifier Option S G V G HP Silicon Amplifier GasFet Amplifier 118-137 GaAsFet Option 225-400 GaAsFet Option Performance OBA Amp (BB) Number of Receiver Multicoupler Channels 02 04 08 12 16 2 Channels 4 Channels 8 Channels 12 Channels 16 Channels (AA-W) Preselector Option (BW - Frequency Sub-band): 01-1 01-2 01-3 01-4 19-5 32-6 02-2 1 MHz BW / 138-150 MHz 1 MHz BW / 150-160 MHz 1 MHz BW / 160-174 MHz 1 MHz BW / 220-222 MHz 19 MHz BW / 118-137 MHz 32 MHz BW / 118-150 MHz 2.5 MHz BW / 150-160 MHz 00-0 09-9 NO PRESELECTOR ORDERED Custom Preselector RM3(AA-W)(BB)(X)(Y)(C) Non-Expandable Receiver Multicoupler (300-599 MHz) Model # Description (C) Output Connector Option B N BNC Female N Female This is a special assembly that’s available on non-expandable versions of the RM's only. Expandable versions all use BNC female only. * note that input connectors are always N female (Y) Power Supply Option 1 2 3 4 5 6 7 8 115 VAC 220 VAC 12 VDC 24 VDC 48 VDC 115 VAC CE 220 VAC CE DC Termination Block (X) Amplifier Option S G Silicon Amplifier GasFet Amplifier (BB) Number of Receiver Multicoupler Channels 02 04 08 16 2 Channels 4 Channels 8 Channels 16 Channels (AA-W) Preselector Option (BW - Frequency Sub-band): 01-1 03-1 05-1 1 MHz BW / 406-430 MHz 3 MHz BW / 406-440 MHz 5 MHz BW / 406-450 MHz 01-2 03-2 05-2 1 MHz BW / 440-470 MHz 3 MHz BW / 440-480 MHz 5 MHz BW / 450-480 MHz 01-3 03-3 05-3 17-5 1 MHz BW / 470-512 MHz 3 MHz BW / 480-512 MHz 5 MHz BW / 480-512 MHz 175 MHz BW / 225-400 MHz 09-9 Custom Preselector RM4(AA-W)E(BB)(X)(Y)(C) Expandable/Non-Expanbable Rx Multicoupler (600-999 MHz) Model # Description Configuration # / Part Number (C) Output Connector Option B N BNC Female N Female This is a special assembly that’s available on nonexpandable versions of the RM's only. Expandable versions all use BNC female only. * note that input connectors are always N female (Y) Power Supply Option 1 2 3 4 5 6 7 8 9 115 VAC 220 VAC 12 VDC 24 VDC 48 VDC 115 VAC CE 220 VAC CE DC Termination Block Less Power Supply (X) Amplifier Option G GasFet Amplifier (BB) Number of Receiver Multicoupler Channels 02 2 Channels 04 4 Channels 08 8 Channels 16 16 Channels * 12 channel not available, must use 16 with termiation loads E Expandable Unit (available only for more than 20 channels) (AA-W) Preselector Option (BW - Frequency Sub-band): 15-1 15-2 15-3 15-4 10-1 09-9 15 MHz BW / 806-821 MHz 15 MHz BW / 821-849 MHz 15 MHz BW / 850-865MHz 15 MHz BW / 865-880 MHz 9.6 MHz BW / 896-901 MHz Custom Preselector TM3(AA-W)(D)(BB)(X)(Y)(C) Non-Expandable TTA Multicoupler (300-599 MHz) Model # Description (C) Output Connector Option B N BNC Female N Female * note that input connectors are always N female (Y) Power Supply Option 1 2 3 4 5 6 7 115 VAC 220 VAC 12 VDC 24 VDC 48 VDC 115 VAC CE 220 VAC CE (X) Amplifier Option S G Silicon Amplifier GasFet Amplifier (BB) Number of Receiver Multicoupler Channels 02 04 08 16 2 Channels 4 Channels 8 Channels 16 Channels (D) Tower Mounted Unit Configuration Option A B C Standard Single Amplifier configuration Single Amplifier with relay bypass configuration Redundant aplifier with relay bypass configuration (AA-W) Preselector Option (BW - Frequency Sub-band): 01-1 03-1 05-1 1 MHz BW / 406-430 MHz 3 MHz BW / 406-440 MHz 5 MHz BW / 406-450 MHz 01-2 03-2 05-2 1 MHz BW / 440-470 MHz 3 MHz BW / 440-480 MHz 5 MHz BW / 450-480 MHz 01-3 03-3 05-3 09-9 1 MHz BW / 470-512 MHz 3 MHz BW / 480-512 MHz 5 MHz BW / 480-512 MHz Custom Preselector TM4(AA-W)(D)(BB)(X)(Y)(C) Non-Expanbable TTA (806-880 MHz) Model # Description (C) Output Connector Option B N BNC Female N Female * note that input connectors are always N female (Y) Power Supply Option 1 2 3 4 5 6 7 115 VAC 220 VAC 12 VDC 24 VDC 48 VDC 115 VAC CE 220 VAC CE (X) Amplifier Option G GasFet Amplifier (BB) Number of Receiver Multicoupler Channels 02 2 Channels 04 4 Channels 08 8 Channels 16 16 Channels Note: add the E if an expandable version - blank if not expandable (D) Tower Mounted Unit Configuration Option A B C Standard Single Amplifier configuration Single Amplifier with relay bypass configuration Redundant aplifier with relay bypass configuration (AA-W) Preselector Option (BW - Frequency Sub-band): 15-1 15-2 15-3 15-4 09-9 15 MHz BW / 806-821 MHz 15 MHz BW / 821-849 MHz 15 MHz BW / 850-865MHz 15 MHz BW / 865-880 MHz Custom Preselector UHF and Tetra Product Catalogue Table of Contents Antennas Page Series SHA311 Series Concealed Bumper Mount Antenna for Undercover Vehicles, 380-512MHz 51 DIRECTIONAL Panel SP330 Cross polarized panel antenna, 12 dBd gain, low PIM, 85 degree BW, 380-430 MHz52 Yagi SY303 SY307 SY3072 SY3074 SY307R SY350 Yagi directional antenna, 6.5 dBd gain, 380-475 MHz Yagi directional antenna, 10 dBd gain, black anodized, 340-512 MHz Yagi directional antenna, 12.5 dBd gain, dual, black anodized, 340-512 MHz Yagi directional antenna, 15 dBd gain, black anodized, quad, 340-512 MHz Yagi directional antenna, 10 dBd gain, radome enclosed, HD, 406-470 MHz Yagi directional antenna, 7 dBd gain, broad band, 406-512 MHz 53 54 55 56 57 58 Corner Reflector SV302 SV360 Corner reflector antenna, 9.5 dBd and 12 dBd, 406-512 MHz Parabolic reflector directive antenna, 15 dBd gain, 380-512 MHz 59 60 OFFSET/ BI-DIRECTIONAL Exposed Dipole SD310-H 1 dipole antenna, 2.0/1.5 dBd gain, HD, 370-512 MHz SD310-HL- PIM Certified 1 dipole antenna, 1.5/2.0 dBd gain, low PIM, HD, 370-512 MHz SD312-H 2 dipole antenna, 4.0/4.8 dBd gain, HD, 370-512 MHz SD312-HL- PIM Certified 2 dipole antenna, 4.0/4.5dBd gain, low PIM, HD, 370-512 MHz SD314-H 4 dipole antenna, 8.0/8.5 dBd gain, HD, 370-512 MHz SD314-HL- PIM Certified 4 dipole antenna, 7.0/7.5 dBd gain, low PIM, HD, 370-512 MHz SD318-H 8 dipole antenna, 9.3/10.2 gain, HD, 370-512 MHz SD318-HL- PIM Certified 8 dipole antenna, 10 dBd gain, low PIM, HD, 370-512 MHz 61 62 63 64 65 66 67 68 OMNI OR BI-DIRECTIONAL, ADJUSTABLE Exposed Dipole SD335 SD3352 Exposed dipole antenna array, 3 dBd/5.5 dBd gain, field adjustable, 406-512 MHz 69 Exposed dipole antenna array, 6 dBd/8.5 dBd gain, field adjustable, 406-512 MHz 70 OMNI-DIRECTIONAL SM300 High performance, low profile, universal transportation antenna, 350-2500 MHz 71 Collinear SC320 Region Telephone E-mail Collinear omni antenna, 10 dBd gain, 406-480 MHz 72 United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] V UHF and Tetra Product Catalogue Table of Contents Antennas, continued Page OMNI-DIRECTIONAL, continued Series Collinear, continued SC323-H Collinear omni antenna, 3 dBd gain, HD, 311-512 MHz SC323-HL- PIM Certified Collinear omni antenna, 3 dBd gain, low PIM, 380-430 MHz SC329-H Collinear omni antenna, 6 dBd gain, 380-480 MHz SC329-HL- PIM Certified Collinear omni antenna, 6 dBd gain, low PIM, 380-470 MHz SC381-HL- PIM Certified Collinear omni antenna, 6 dBd gain, low PIM, 380-512 MHz 73 74 75 76 77 Ground Plane SG301 SG317 Ground plane omni antenna, 0 dBd gain, 395-512 MHz Ground plane omni antenna, 2.5 dBd gain, 406-512 MHz 78 79 Mobile/Transit ST321 ST321R SUB- UHF SUT- UHF Mobile omni antenna, 0 dBd gain, low profile, 406-512 MHz Mobile omni, 0 dBd gain, low profile, radome, 380-512 MHz Mobile omni antenna, 2-6 dBd gain, 406-512 MHz Mobile omni antenna, 0 dBd gain, 406-512 and 512-970 MHz 80 81 82 83 Transmitter Combiners CTx450F RTC5400R TC3 TJ3 TN3 Open Cabinet Cavity-Ferrite Transmitter Combiner Trunking Transmitter Combiner, 5 Channels Hybrid-Ferrite Transmitter Combiner Cavity-Ferrite Transmitter Combiner, 7" Cans Cavity-Ferrite Transmitter Combiner, 8.5" Cans 84 85 86 87 88 Receiver Multicouplers RM3 UHF Bipolar Receive Mulitcoupler 89 4 Cavity Compact UHF Mobile Duplexer 6 Cavity Compact UHF Mobile Duplexer Tetra Band Base Station Duplexer 4 Cavity Compact Res-Lok Q-Circuit UHF Duplexer 6 Cavity Compact Res-Lok Q-Circuit Duplexer 6 Cavity Res-Lok Q-Circuit Duplexer 90 91 92 93 94 95 Duplexers MR354 MR356 P3880R-CC Q3220E Q3330C Q3330E Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] VI UHF and Tetra Product Catalogue Table of Contents Cavity Filters Page Series FP30107 FP30109 FQ30107 FR30107 High-Q Bandpass 1/4 wave Cavity Filter, Single 7" Can High-Q Bandpass 1/4 wave Cavity Filter, Single 8.5" Can High Q Circuit 1/4 wave Cavity Filter, Single 7" Can High-Q Notch 1/4 wave Cavity Filter, Single 7" Can 96 97 98 99 Preselector Filters FP30401 PH3040 Compact Surface Mounted 1, 3 or 5 MHz Preselector Highly Versatile Res-Lok Preselector 100 101 Expandable Multicouplers C3019 C3024 C3027 C3029 C3034 C3037 C Series Pass-Reject Expandable Multicoupler, 8.5" Cans C-Series Res-Lok Pass-Reject Expandable Multicoupler, 406-512 MHz C Series Pass-Reject Expandable Multicoupler, 7" Cans C Series Pass-Reject Expandable Multicoupler, 8.5" Cans Res-Lok C Series Pass-Reject Exp Multicoupler C Series Pass-Reject Expandable Multicoupler, 7" Cans 102 103 104 105 106 107 Tower Top Amplifiers TM3 Low-Loss Tower Top Amp/Receiver Multicoupler 108 Hybrid Coupler, 406-512 MHz 109 Hybrid Couplers HH3 Isolators and Circulators I3 Compact Rugged Isolator/Circulator, 406-512 MHz 110 Intermod Supression Panels PC3 Region Telephone E-mail Rack Mounted Ferrite Intermod Suppression Panel 111 United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] VII Antennas UHF and Tetra Antennas SHA311 Series Concealed Bumper Mount Antenna for Undercover Vehicles, 380-512MHz • • • • Completely hidden-does not need any existing vehicle antennas Wide band with 20 to 50MHz bandwidth depending on the vehicle Easy installation and tuning for optimum performance and durability in a wide variety of vehicles Applicable for both covert and overt law enforcement vehicles Model Description SHA311-SF1SNM SHA311-SF2SNM SHA311-SF3SNM Concealed Bumper Mount Antenna for Undercover Vehicles, 380-430 MHz Concealed Bumper Mount Antenna for Undercover Vehicles, 430-470 MHz Concealed Bumper Mount Antenna for Undercover Vehicles, 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Gain (nominal) Impedance Input VSWR (max) Average power input (max) Mechanical Specifications Length/ Height Shipping dimensions Weight Connector Environmental Specifications Temperature range MHz MHz dBd (dBi) Ω 20 380 to 512 unity (2.1) 50 2:1 50 W in (mm) in (mm) lbs (kg) 21 (533) 9x14x5 (229x356x127) 2 (0.9) N (male) °F (°C) -40 to +140 (-40 to +60) Ordering Information Please contact Sinclair CSR for your requirement on dual antennas (one in the front bumper and one in the rear) Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.1/61 SHA311 Series Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 51/202 Antennas UHF and Tetra Antennas SP330 Series Cross polarized panel antenna, 12 dBd gain, low PIM, 85 degree BW, 380-430 MHz • • • • Excellent for sectorized Tetra systems Fully enclosed in ABS plastic radome Available in cross polarized and circular polarized versions Suitable for polarization diversity applications Model Description SP330C-ST1P85LDF Circular polarized antenna, 10dBd gain, low PIM, 85° Beam width, 380-400 MHz SP330C-ST1P85LDF(D10) Circular polarized antenna, 9.6dBd gain, low PIM, 85° Beam width, 10° DT, 380-400 MHz SP330C-ST2P85LDF Circular polarized antenna, 10 dBd gain, low PIM, 85° Beam width, 410-430 MHz SP330C-ST2P85LDF(D15) Circular polarized antenna, 9.6 dBd gain, low PIM, 85° Beam width, 15° DT, 410-430 MHz SP330X-ST1P85LDF Cross polarized antenna, 10 dBd gain, low PIM, 85° Beam width, 380-400 MHz SP330X-STBP65LDF Cross polarized antenna, 12 dBd gain, low PIM, 65° Beam width, 380-430 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Polarization Gain (nominal) Electrical tilt (available) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio Average power input (max) Isolation port to port (typ) Mechanical Specifications Length/ Height Width Depth Weight Actual Shipping weight Connector Weight iced Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Projected area (Flat Plate Equivalent) Region Telephone E-mail 380 to 430 slant 45 degrees 12 (14.1) 0, 10, or 15 DC ground -153 Directional 1.5:1 85 19 16 300 20 dBd (dBi) dBc degrees degrees dB W dB in (mm) in (mm) in (mm) lbs (kg) lbs (kg) lbs (kg) 78 (1981) 14 (356) 8.7 (221) 40 (18.2) 67 (30.4) 7/16 DIN (female) 130 (59) mph (km/h) mph (km/h) °F (°C) ft² (m²) 110 (177) 135 (217) -40 to +158 (-40 to +70) 7.3 (0.68) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.2/61 MHz SP330 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 52/202 Antennas UHF and Tetra Antennas SY303 Series Yagi directional antenna, 6.5 dBd gain, 380-475 MHz • Rugged 3-element yagi • Adapted for medium-gain applications • Suitable for vertical or horizontal polarization Model Description SY303-SF1SNM SY303-SF2SNF SY303-SF2SNM SY303-ST1LDF SY303-ST1SNM SY303-ST2LDF SY303-ST2SNM 6.5 dBd gain, N (male) connector, 403-430 MHz 6.5 dBd gain, N (female) connector, 450-475 MHz 6.5 dBd gain, N (male) connector, 450-475 MHz 6.5 dBd gain, Low PIM, 7/16 DIN (female) connector, 380-400 MHz 6.5 dBd gain, N (male) connector, 380-400 MHz 6.5 dBd gain, low PIM, 7/16 DIN (female) connector, 403-430 MHz 6.5 dBd gain, N (male) connector, 403-430 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Mounting hardware Environmental Specifications Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Bending moment Region Telephone E-mail 20 380 to 475 vertical or horizontal 6.5 (8.6) DC ground Directional 1.5:1 103 65 12 250 dBd (dBi) degrees degrees dB W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 15.9 (403) 13.7 (348) 5.1 (130) 17x5x20 (432x127x508) 2 (0.9) 5 (2.3) N (male) #115 clamp °F (°C) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) -40 to +140 (-40 to +60) 0.21 (0.02) 0.77 (0.07) 7.9 (35.1) 4.8 (6.5) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.3/61 MHz MHz SY303 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 53/202 Antennas UHF and Tetra Antennas SY307 Series Yagi directional antenna, 10 dBd gain, black anodized, 340-512 MHz • • • • Rugged 7-element design optimized for 10 dBd gain in compact size 3/8 inch aluminum reflector/director elements with 360 degree welds to aluminum boom Anodized for extended life and superior performance in heavy ice or corrosive environments Low PIM -150 dBc available Model Description SY307-SF1SNM SY307-SF2SNM SY307-SF3SNM SY307-SF4SNM SY307-SF5SNM SY307-SF6SNM SY307-SF7SNM SY307-SF8SNM SY307-SF9SNM 10 dBd gain, N (male) connector, 403-430 MHz 10 dBd gain, N (male) connector, 430-450 MHz 10 dBd gain, N (male) connector, 450-470 MHz 10 dBd gain, N (male) connector, 470-490 MHz 10 dBd gain, N (male) connector, 490-512 MHz 10 dBd gain, N (male) connector, 340-360 MHz 10 dBd gain, N (male) connector, 360-380 MHz 10 dBd gain, N (male) connector, 380-400 MHz 10 dBd gain, N (male) connector, 440-460 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Finish Mounting hardware Environmental Specifications Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) MHz MHz 20 340 to 512 vertical or horizontal 10 (12.1) DC ground Directional 1.5:1 55 41 20 250 dBd (dBi) degrees degrees dB W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 44 (1118) 14.3 (363) 3 (76) 47x6x18 (1194x152x457) 5 (2.3) 8 (3.6) N (male) anodize black #115 clamp (included) °F (°C) ft² (m²) ft² (m²) lbs (N) -40 to +140 (-40 to +60) 0.4 (0.04) 1 (0.09) 15.6 (69.4) Ordering Information #115 clamp included. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.4/61 SY307 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 54/202 Antennas UHF and Tetra Antennas SY3072 Series Yagi directional antenna, 12.5 dBd gain, dual, black anodized, 340-512 MHz • Two rugged 7-element design optimized for 12.5 dBd gain • 3/8 inch aluminum reflector/director elements with 360 degree welds • Anodized for extended life and superior performance in harsh environments Model Description SY3072-SF1SNM SY3072-SF2SNM SY3072-SF3SNM SY3072-SF4SNM SY3072-SF5SNM SY3072-SF6SNM SY3072-SF7SNM SY3072-SF8SNM SY3072-SF9SNM 12.5 dBd gain, N (male) connector, 403-430 MHz 12.5 dBd gain, N (male) connector, 430-450 MHz 12.5 dBd gain, N (male) connector, 450-470 MHz 12.5 dBd gain, N (male) connector, 470-490 MHz 12.5 dBd gain, N (male) connector, 490-512 MHz 12.5 dBd gain, N (male) connector, 340-360 MHz 12.5 dBd gain, N (male) connector, 360-380 MHz 12.5 dBd gain, N (male) connector, 380-400 MHz 12.5 dBd gain, N (male) connector, 440-460 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Environmental Specifications Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Bending moment MHz 340 to 512 vertical or horizontal 12.5 (14.6) DC ground Directional 1.5:1 55 20 20 250 dBd (dBi) degrees degrees dB W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 46.3 (1175) 17.3 (438) 3 (76) 47x6x18 (1194x152x457) 14 (6.4) 16 (7.3) N (male) °F (°C) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) -40 to +140 (-40 to +60) 0.94 (0.09) 2.52 (0.23) 36.4 (161.9) 28.1 (37.9) Ordering Information Specify frequency of operation. #115 clamps included. These antennas can be provided with various cable lengths- see Application notes. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.5/61 SY3072 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 55/202 Antennas UHF and Tetra Antennas SY3074 Series Yagi directional antenna, 15 dBd gain, black anodized, quad, 340-512 MHz • Four rugged 7-element yagi antenna providing 15 dBd gain • 3/8 inch aluminum reflector/director elements with 360 degree welds • Anodized for extended life and superior performance in harsh environments Model Description SY3074-SF1SNM SY3074-SF2SNM SY3074-SF3SNM SY3074-SF4SNM SY3074-SF5SNM SY3074-SF6SNM SY3074-SF7SNM SY3074-SF8SNM SY3074-SF9SNM 15 dBd gain, N (male) connector, 403-430 MHz 15 dBd gain, N (male) connector, 430-450 MHz 15 dBd gain, N (male) connector, 450-470 MHz 15 dBd gain, N (male) connector, 470-490 MHz 15 dBd gain, N (male) connector, 490-512 MHz 15 dBd gain, N (male) connector, 340-360 MHz 15 dBd gain, N (male) connector, 360-380 MHz 15 dBd gain, N (male) connector, 380-400 MHz 15 dBd gain, N (male) connector, 440-460 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio MHz MHz 20 340 to 512 vertical or horizontal 15 (17.1) DC ground Directional 1.5:1 22 19 20 dBd (dBi) www.sinctech.com degrees degrees dB Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Projected area (Flat Plate Equivalent) Lateral thrust (100mph) in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 57 (1448) 38.5 (978) 47 (1194) 47x6x8 (1194x152x203) 25 (11.4) 32 (14.5) N (male) mph (km/h) mph (km/h) ft² (m²) lbs (N) 100 (161) 160 (258) 1.6 (0.15) 168 (747.3) Ordering Information Specify frequency of operation. #115 clamps included. These antennas can be provided with various cable lengths- see Application notes. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.6/61 SY3074 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 56/202 Antennas UHF and Tetra Antennas SY307R Series Yagi directional antenna, 10 dBd gain, radome enclosed, HD, 406-470 MHz • Heavy duty, radome enclosed 10 dBd gain directional antenna • Ideally suited to harsh environment applications Model Description SY307R-HF1SNF SY307R-HF2SNF SY307R-HF3SNF 10 dBd gain, N (female) connector, 406-430 MHz 10 dBd gain, N (female) connector, 450-470 MHz 10 dBd gain, N (female) connector, 430-450 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio Average power input (max) Mechanical Specifications Length/ Height Width Shipping dimensions Weight Actual Shipping weight Connector Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Torsional moment MHz 406 to 470 vertical or horizontal 10 (12.1) DC ground Directional 1.5:1 48 42 15 250 dBd (dBi) degrees degrees dB W in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 30 (762) 13 (330) 17x17x35 (432x432x889) 19 (8.6) 20 (9.1) N (female) #4 clamp mph (km/h) mph (km/h) °F (°C) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) 110 (177) 118 (190) -40 to +158 (-40 to +70) 1.4 (0.13) 1.8 (0.17) 113 (502.6) 125 (168.8) Ordering Information Specify frequency of operation. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.7/61 SY307R Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 57/202 Antennas UHF and Tetra Antennas SY350 Series Yagi directional antenna, 7 dBd gain, broad band, 406-512 MHz • Developed to maintain its performance characteristic under severe icing or hoarfrost conditions • Ideal for use in coastal or mountainous areas • Can be stacked for added gain Model Description SY350-SFXSNM 7 dBd gain, N (male) connector, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio MHz MHz dBd (dBi) www.sinctech.com degrees degrees dB Mechanical Specifications Length/ Height Shipping dimensions Weight Actual Shipping weight Connector Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Projected area (Flat Plate Equivalent) Lateral thrust (100mph) Torsional moment Region Telephone E-mail in (mm) in (mm) lbs (kg) lbs (kg) 28 (711) 47x6x18 (1194x152x457) 5 (2.3) 5 (2.3) N (male) mph (km/h) mph (km/h) °F (°C) ft² (m²) lbs (N) ft-lbs (Nm) 85 (137) 150 (242) -40 to +158 (-40 to +70) 0.22 (0.02) 24 (106.8) 30 (40.5) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.8/61 70 406 to 512 vertical or horizontal 7 (9.1) DC ground Directional 2:1 80 60 20 SY350 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 58/202 Antennas UHF and Tetra Antennas SV302 Series Corner reflector antenna, 9.5 dBd and 12 dBd, 406-512 MHz • Offers reliable service in severe weather and ice conditions • Broad band operation Model Description SV302-HF1SNM SV302-HF2SNM SV3022-HF1SNM SV3022-HF2SNM 9.5 dBd gain, N (male) connector, 406-470 MHz 9.5 dBd gain, N (male) connector, 450-512 MHz 12 dBd gain, N (male) connector, 406-470 MHz 12 dBd gain, N (male) connector, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio MHz dBd (dBi) www.sinctech.com degrees degrees dB Mechanical Specifications Length/ Height Width Depth Weight Connector Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Lateral thrust (100mph) Region Telephone E-mail in (mm) in (mm) in (mm) lbs (kg) 30 (762) 50 (1270) 23 (584) 30 (13.6) N (male) mph (km/h) mph (km/h) lbs (N) 85 (137) 125 (201) 202 (898.5) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.9/61 406 to 512 vertical or horizontal 9.5 (11.6) DC ground Directional 1.5:1 45 60 20 SV302 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 59/202 Antennas UHF and Tetra Antennas SV360 Series Parabolic reflector directive antenna, 15 dBd gain, 380-512 MHz • High directional antenna • Rugged construction • Suitable for horizontal or vertical polarization Model Description SV360-SF1SNM SV360-SF2SNM SV360-SF3SNM 15 dBd gain, N (male) connector, 406-420 MHz 15 dBd gain, N (male) connector, 450-470 MHz 15 dBd gain, N (male) connector, 380-400 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Front to back ratio MHz MHz dBd (dBi) www.sinctech.com degrees degrees dB Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Radiating element material Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Lateral thrust (100mph) Region Telephone E-mail in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 45.8 (1163) 88 (2235) 25 (635) 47x9x43 (1194x229x1092) 60 (27.2) 50 (22.7) N (male) aluminum #4 clamp mph (km/h) mph (km/h) °F (°C) lbs (N) 85 (137) 100 (161) -22 to +140 (-30 to +60) 422 (1877.1) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.10/61 20 380 to 470 vertical or horizontal 15 (17.1) DC ground Directional 1.5:1 18 32 25 SV360 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 60/202 Antennas UHF and Tetra Antennas SD310-H Series 1 dipole antenna, 2.0/1.5 dBd gain, HD, 370-512 MHz • • • • Covers 370-512 MHz in 2 band splits 1.5 dBd gain, elliptical (bi-directional) pattern (1/2 wave), 2.0 dBd gain offset pattern (1/4 wave) Heavy duty wind ratings, 75W power handling Recommend using an SMK-125-A7 side mounting kit Model Description SD310-HF1P2SNM SD310-HF1P4SNM SD310-HF2P2SNM SD310-HF2P4SNM 1.5 dBd gain, elliptical, N (male) connector, 370-460 MHz 2.0 dBd gain, offset, N (male) connector, 370-460 MHz 1.5 dBd gain, elliptical, N (male) connector, 406-512 MHz 2.0 dBd gain, offset, N (male) connector, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) MHz dBd (dBi) degrees degrees W www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) 370 to 512 vertical 2 (4.1) DC ground Offset/ Bi-directional 1.5:1 224 68 75 in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 60 (1524) 10.3 (260) 3.5 (89) 83x5x20 (2108x127x508) 7.5 (3.4) 15 (6.8) N (male) 1.9 (48) 24 (610) clamps not supplied in (mm) in (mm) mph (km/h) mph (km/h) ft² (m²) ft² (m²) lbs (N) 150 (242) 240 (386) 0.65 (0.06) 2.31 (0.21) 26.1 (116.1) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Recommend using an SMK-125-A7 side mounting kit Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.11/61 SD310-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 61/202 Antennas UHF and Tetra Antennas SD310-HL- PIM Certified Series 1 dipole antenna, 1.5/2.0 dBd gain, low PIM, HD, 370-512 MHz • Industry-leading -150 dBc PIM rating, covers 370-512 MHz in 3 band splits • 1.5 dBd elliptical (bi-directional) pattern (1/2 wave), 2.0 dBd gain offset pattern (1/4 wave) • Rugged wind ratings Model Description SD310-HF1P2LDF SD310-HF1P4LDF SD310-HF2P2LDF SD310-HF2P4LDF SD310-HF3P2LDF SD310-HF3P4LDF 1.5 dBd gain, low PIM, elliptical, HD, 370-430 MHz 2.0 dBd gain, low PIM, offset, HD, 370-430 MHz 1.5 dBd gain, low PIM, elliptical, HD, 406-470 MHz 2.0 dBd gain, low PIM, offset, HD, 406-470 MHz 1.5 dBd gain, low PIM, elliptical, HD, 450-512 MHz 2.0 dBd gain, low PIM, offset, HD, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) MHz MHz dBd (dBi) dBc degrees degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) 62 370 to 512 vertical 2 (4.1) DC ground -150 Offset/ Bi-directional 1.5:1 204 84 75 48 (1219) 12.3 (312) 3.5 (89) 83x5x20 (2108x127x508) 6.5 (3) 15 (6.8) 7/16 DIN (female) 9.5 (4.3) 1.9 (48) 18 (457) clamps not supplied 215 (346) 270 (435) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.12/61 SD310-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 62/202 Antennas UHF and Tetra Antennas SD312-H Series 2 dipole antenna, 4.0/4.8 dBd gain, HD, 370-512 MHz • • • • Covers 370-512 MHz in 2 band splits 4.0 dBd gain in elliptical (bi-directional) pattern (1/2 wave), 4.8 dBd gain offset pattern (1/4wave) Heavy duty, with 150W power handling Recommend using an SMK-125-A7 side mounting kit Model Description SD312-HF1P2SNM SD312-HF1P4SNM SD312-HF2P2SNM SD312-HF2P2SNM(D06) SD312-HF2P4SNM 4.0 dBd gain, N (male) connector, elliptical, HD, 370-460 MHz 4.8 dBd gain, offset, HD, N (male) connector, 370-460 MHz 4.0 dBd gain, elliptical, HD, N (male) connector, 406-512 MHz 4.0 dBd gain, elliptical, 6° DT, HD, N (male) connector, 406-512 MHz 4.8 dBd gain, offset, HD, N (male) connector, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) MHz MHz dBd (dBi) degrees degrees W Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Torsional moment 90 370 to 512 vertical 4.8 (6.9) DC ground Offset/ Bi-directional 1.5:1 224 36 150 in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 80 (2032) 11 (279) 3.5 (89) 83x5x20 (2108x127x508) 10.5 (4.8) 20 (9.1) N (male) 1.9 (48) 24 (610) clamps not supplied in (mm) in (mm) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) 0.95 (0.09) 3.53 (0.33) 42 (186.8) 10.5 (14.2) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Recommend using an SMK-125-A7 side mounting kit Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.13/61 SD312-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 63/202 Antennas UHF and Tetra Antennas SD312-HL- PIM Certified Series 2 dipole antenna, 4.0/4.5dBd gain, low PIM, HD, 370-512 MHz • Industry-leading -150 dBc PIM rating, covering 370-512 MHz in 3 band splits • 4.0 dBd in elliptical (bi-directional) pattern (1/2 wave),4.5 dBd in offset pattern (1/4 wave) • Heavy duty wind ratings, with 150W power handling Model Description SD312-HF1P2LDF SD312-HF1P4LDF SD312-HF2P2LDF SD312-HF2P4LDF SD312-HF3P2LDF SD312-HF3P4LDF 4.0 dBd gain, 7/16 DIN (female) connector, elliptical, 370-430 MHz 4.5 dBd gain, 7/16 DIN (female) connector, offset, 370-430 MHz 4.0 dBd gain, 7/16 DIN (female) connector, elliptical, 406-470 MHz 4.5 dBd gain, 7/16 DIN (female) connector, offset, 406-470 MHz 4 dBd gain, 7/16 DIN (female) connector, elliptical, 450-512 MHz 4.5 dBd gain, 7/16 DIN (female) connector, offset, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) MHz MHz dBd (dBi) dBc degrees degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) 62 370 to 512 vertical 4 (6.1) DC ground -150 Offset/ Bi-directional 1.5:1 236 36 150 83.1 (2112) 12.3 (311) 3.5 (89) 83x50x20 (2108x1270x508) 9.6 (4.4) 20 (9.1) 7/16 DIN (female) 12.3 (5.6) 1.9 (48) 18 (457) clamps not supplied 170 (274) 230 (370) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.14/61 SD312-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 64/202 Antennas UHF and Tetra Antennas SD314-H Series 4 dipole antenna, 8.0/8.5 dBd gain, HD, 370-512 MHz • • • • Covers 370-512 MHz in 2 band splits 8.0 dBd gain in elliptical (bi-directional) pattern (1/2wave), 8.5 dBd gain offset pattern (1/4wave) Heavy duty wind rating and 150W power handling Recommend using an SMK-125-A7 side mounting kit Model Description SD314-HF1P2SNM SD314-HF1P4SNM SD314-HF2P2SNM SD314-HF2P2SNM(EBK) 8.0 dBd gain, elliptical, HD, N (male) connector, 370-460 MHz 8.5 dBd gain, offset, HD, N (male) connector, 370-460 MHz 8.0 dBd gain, elliptical, HD, N (male) connector, 406-512 MHz 8.0 dBd gain, elliptical, HD, N (male) connector, Black epoxy paint finish, 406-512 MHz SD314-HF2P4SNM 8.5 dBd gain, offset, HD, N (male) connector, 406-512 MHz SD314-HF2P4SNM(EBK) 8.5 dBd gain, offset, HD, N (male) connector, 406-512 MHz SD314-HF2P4SNM(R-ABK) 8.5 dBd gain, offset, HD, N (male) connector, Black anodized finish, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Polarization Gain (nominal) Electrical tilt (available) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Torsional moment Bending moment MHz 370 to 512 vertical 8.5 (10.6) 0,2,4,6,8,10 DC ground Offset/ Bi-directional 1.5:1 222 16 200 dBd (dBi) degrees degrees W in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 114 (2896) 16 (406) 3.5 (89) 21 (9.5) 35 (15.9) N (male) 2.4 (60) 36 (914) clamps not supplied in (mm) in (mm) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) ft-lbs (Nm) 1.73 (0.16) 4.38 (0.41) 77 (342.5) 11 (14.9) 132 (178.2) Ordering Information Specify required frequency and connector when ordering. Available with N male or N female connector 2 x #5 clamps recommended (not included). Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.15/61 SD314-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 65/202 Antennas UHF and Tetra Antennas SD314-HL- PIM Certified Series 4 dipole antenna, 7.0/7.5 dBd gain, low PIM, HD, 370-512 MHz • Industry-leading -150 dBc PIM rating, covering 370-512 MHz in 3 band splits • 7.0 dBd gain elliptical (bi-directional) pattern (1/2 wave), 7.5 dBd in offset pattern (1/4 wave) • Heavy duty wind rating and 300W power handling Model Description SD314-HF1P2LDF SD314-HF1P4LDF SD314-HF2P2LDF SD314-HF2P4LDF SD314-HF3P2LDF SD314-HF3P4LDF 7 dBd gain, elliptical, HD, 7/16 DIN (female) connector, 370-430 MHz 7.5 dBd gain, offset, HD, 7/16 DIN (female) connector, 370-430 MHz 7 dBd gain, elliptical, HD, 7/16 DIN (female) connector, 406-470 MHz 7.0 dBd gain, offset, HD, 7/16 DIN (female) connector, 406-470 MHz 7 dBd gain, elliptical, HD, 7/16 DIN (female) connector, 450-512 MHz 7.5 dBd gain, offset, HD, 7/16 DIN (female) connector, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Lateral thrust (100mph) Region Telephone E-mail dBd (dBi) dBc degrees degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) lbs (N) 64 370 to 512 vertical 7 (9.1) DC ground -150 Offset/ Bi-directional 1.5:1 224 16 300 120.1 (3051) 11 (279) 3.5 (89) 118x4x20 (2997x102x508) 12.9 (5.9) 7/16 DIN (female) 15.3 (6.9) 1.9 (48) 26 (660) clamps not supplied 125 (201) 150 (242) 69.5 (309.1) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.16/61 MHz MHz SD314-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 66/202 Antennas UHF and Tetra Antennas SD318-H Series 8 dipole antenna, 9.3/10.2 gain, HD, 370-512 MHz • • • • Covers 370-512 MHz in 2 band splits 9.3 dBd gain in elliptical (bi-directional) pattern (1/2 wave), 10.2 dBd gain offset pattern (1/4 wave) Heavy duty wind rating and 150W power handling Recommend using an SMK-125-A7 side mounting kit Model Description SD318-HF1P2SNM SD318-HF1P4SNM SD318-HF2P2SNM SD318-HF2P4SNM 9.3 dBd gain, elliptical, HD, N (male) connector, 370-460 MHz 10.2 dBd gain, offset, HD, N (male) connector, 370-460 MHz 9.3 dBd gain, elliptical, HD, N (male) connector, 406-512 MHz 10.2 dBd gain, offset, HD, N (male) connector, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) MHz dBd (dBi) degrees degrees W www.sinctech.com Mechanical Specifications Length/ Height Width Depth Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Torsional moment Bending moment 370 to 512 vertical 10.2 (12.3) DC ground Offset/ Bi-directional 1.5:1 222 8 150 in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 204 (5182) 12 (305) 3.5 (89) 46 (20.9) 80 (36.3) N (male) 2.4 (60) 48 (1219) clamps not supplied in (mm) in (mm) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) ft-lbs (Nm) 3.19 (0.3) 5.25 (0.49) 129 (573.8) 21 (28.4) 748 (1009.8) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Recommend using an SMK-125-A7 side mounting kit Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.17/61 SD318-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 67/202 Antennas UHF and Tetra Antennas SD318-HL- PIM Certified Series 8 dipole antenna, 10 dBd gain, low PIM, HD, 370-512 MHz • Industry-leading -150 dBc PIM rating, covers 370-512 MHz in 3 band splits • 10 dBd gain offset pattern (1/4 wave) and elliptical (bi-directional) pattern (1/2 wave) • Heavy duty wind ratings, 300W power handling Model Description SD318-HF1P2LDF SD318-HF1P4LDF SD318-HF2P2LDF SD318-HF2P4LDF SD318-HF3P2LDF SD318-HF3P4LDF 9.5dBd gain, elliptical, 370-430 MHz 10 dBd gain,offset, 370-430 MHz 9.5 dBd gain, elliptical, 406-470 MHz 10 dBd gain, offset, 406-470 MHz 9.5 dBd gain, elliptical, HD, 7/16 DIN (female) connector, 450-512 MHz 10 dBd gain, offset, HD, 7/16 DIN (female) connector, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Weight iced Base pipe diameter Base pipe mounting length Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Lateral thrust (100mph) Torsional moment MHz MHz dBd (dBi) dBc degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 62 370 to 512 vertical 10 (12.1) DC ground -150 Offset/ Bi-directional 1.5:1 9 300 lbs (kg) in (mm) in (mm) 240 (6096) 12.4 (315) 3.5 (89) 247x6x27 (6274x152x686) 58 (26.3) 85 (38.6) 7/16 DIN (female) 80 (36.3) 2.4 (60) 46 (1168) mph (km/h) mph (km/h) lbs (N) ft-lbs (Nm) 90 (145) 110 (177) 145 (645) 31 (41.9) Ordering Information Specify required frequency when ordering. 2 x #130 clamps recommended (not included). Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.18/61 SD318-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 68/202 Antennas UHF and Tetra Antennas SD335 Series Exposed dipole antenna array, 3 dBd/5.5 dBd gain, field adjustable, 406-512 MHz • Broadband antenna featuring omni-directional (3 dBd gain) or bidirectional pattern coverage (5 dBd gain) • Ideally suited for use in multicoupled systems Model Description SD335-SF1PASNM SD335-SF2PASNM N (male) connector, 406-470 MHz N (male) connector, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Lightning protection Pattern Input VSWR (max) Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Projected area (Flat Plate Equivalent) Lateral thrust (100mph) Bending moment Region Telephone E-mail 406 to 512 vertical DC ground Omni or Bi-directional, Adjustable 1.5:1 300 W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) in (mm) in (mm) 96 (2438) 12 (305) 12 (305) 120x7x17 (3048x178x432) 15 (6.8) 25 (11.4) N (male) 1.9 (48) 21 (533) mph (km/h) mph (km/h) ft² (m²) lbs (N) ft-lbs (Nm) 110 (177) 150 (242) 1.57 (0.15) 48 (213.5) 483.5 (652.7) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.19/61 MHz SD335 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 69/202 Antennas UHF and Tetra Antennas SD3352 Series Exposed dipole antenna array, 6 dBd/8.5 dBd gain, field adjustable, 406-512 MHz • Broadband antenna featuring omni-directional or bi-directional pattern coverage • Ideally suited for use in multicoupled systems Model Description SD3352-SF1PASNF SD3352-SF1PASNM SD3352-SF2PASNF SD3352-SF2PASNM SD3352-SF2PASNM(D06) N (female) connector, 406-470 MHz N (male) connector, 406-470 MHz N (female) connector, 450-512 MHz N (male) connector, 450-512 MHz 6° DT, N (male) connector, 450-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Lightning protection Pattern Input VSWR (max) Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Bending moment MHz 406 to 512 vertical DC ground Omni or Bi-directional, Adjustable 1.5:1 300 W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) in (mm) in (mm) 114 (2896) 12 (305) 12 (305) 120x7x17 (3048x178x432) 30 (13.6) 35 (15.9) N (male) 2.4 (60) 21 (533) mph (km/h) mph (km/h) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) 105 (169) 135 (217) 2.1 (0.2) 3.6 (0.33) 87.2 (387.9) 292.6 (395) Ordering Information Clamps not supplies, #5 clamp recommended. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.20/61 SD3352 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 70/202 Antennas UHF and Tetra Antennas SM300 Series High performance, low profile, universal transportation antenna, 350-2500 MHz • Covers full frequency band from 350 MHz to 2500 MHz by a single port • Maximum height 3.3 inches • Excellent design for waterproofing and vibration Model Description SM300-SWBSNF(CGR) Unity gain, low profile, universal transportation antenna, 350-2500 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Impedance Lightning protection Pattern Input VSWR (max) Average power input (max) Mechanical Specifications Length/ Height Width Radome material Length Connector Ground Plane Environmental Specifications Temperature range MHz MHz 2150 350 to 2500 vertical unity (2.1) 50 DC ground Omni-directional 1.5:1 200 dBd (dBi) Ω W in (mm) in (mm) in (mm) 3.3 (84) 8 (203) UV protected ABS 8 (203) N (female) 24x24 () °F (°C) -40 to +140 (-40 to +60) in (mm) Ordering Information SM300-SWBSNF(CGR)- Antenna with Grey radome SM300-SWBSNF(CWH)- Antenna with White radome SM300-SWBSNF(CBK)- Antenna with Black radome Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.21/61 SM300 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 71/202 Antennas UHF and Tetra Antennas SC320 Series Collinear omni antenna, 10 dBd gain, 406-480 MHz • • • • Wide band, high gain, omni-directional antenna of rugged construction DC grounded for lightning protection Tapered radome used to reduce wind loading Recommend using the SMK-225-A3 side mounting kit. Model Description SC320-SF1SNM SC320-SF2SNF SC320-SF2SNM SC320-SF3SNM SC320-SF4SNM SC320-SF5SNM SC320-SF6SNM SC328-HT3SNM 10 dBd gain, N (male) connector, 406-420 MHz 10 dBd gain, N-female connector, 450-460 MHz 10 dBd gain, N (male) connector, 450-460 MHz 10 dBd gain, N (male) connector, 460-470 MHz 10 dBd gain, N (male) connector, 440-450 MHz 10 dBd gain, N (male) connector, 470-480 MHz 10 dBd gain, N (male) connector, 420-430 MHz Collinear omni antenna, 7.5 dBd gain, 350-366 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Impedance Lightning protection Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Shipping dimensions Weight Actual Shipping weight Length Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Lateral thrust (100mph) MHz MHz 10 406 to 480 vertical 10 (12.1) 50 DC ground Omni-directional 1.5:1 6 250 dBd (dBi) Ω degrees W in (mm) lbs (kg) lbs (kg) in (mm) 274x4x4 (6960x102x102) 25 (11.4) 85 (38.6) 264 (6706) N (male) 2.9 (73) 40 (1016) #5 clamp in (mm) in (mm) mph (km/h) mph (km/h) °F (°C) lbs (N) 110 (177) 145 (233) -22 to +140 (-30 to +60) 103 (458.1) Ordering Information Specify frequency band of operation. Recommend using the SMK-225-A3 side mounting kit. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.22/61 SC320 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 72/202 Antennas UHF and Tetra Antennas SC323-H Series Collinear omni antenna, 3 dBd gain, HD, 311-512 MHz • Rugged collinear omni designed for reliable operations in extreme conditions • Efficient, easy to install and durable • No ground radials Model Description SC323-HF2SNM(D00-G3) 3 dBd gain, Ground rods free, 450-470 MHz SC323-HT1SNM(G3) 3 dBd gain, N (male) connector, 380-400 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Electrical tilt (available) Impedance Lightning protection Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Width Shipping dimensions Weight Actual Shipping weight Length Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) MHz MHz 20 380 to 400 vertical 3 (5.1) 0,3,6 downtilt 50 DC ground Omni-directional 1.5:1 28 500 dBd (dBi) Ω degrees W in (mm) in (mm) lbs (kg) lbs (kg) in (mm) 1.8 (45) 114x4x4 (2896x102x102) 5.5 (2.5) 35 (15.9) 79 (2007) N (male) 1.5 (38) 18 (457) #130 CLAMPS in (mm) in (mm) °F (°C) ft² (m²) ft² (m²) lbs (N) -40 to +140 (-40 to +60) 0.62 (0.06) 1 (0.09) 27 (120.1) Ordering Information Specify if any electrical downtilt is required, and the type of connector. Available in 3 and 6 degree downtilts- order times may vary, please contact Sinclair customer service. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.23/61 SC323-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 73/202 Antennas UHF and Tetra Antennas SC323-HL- PIM Certified Series Collinear omni antenna, 3 dBd gain, low PIM, 380-430 MHz • • • • Efficient, easy to install and durable No ground radials Rugged collinear omni designed for reliable operations in extreme conditions Low PIM with -150 dBc rating Model Description SC323-HF1LDF(G3) SC323-HF2LDF(G3) SC323-HT1LDF(G3) SC323-HT2LDF(G3) 3 dBd gain, Ground rods free, 7/16 DIN (female) connector, 406-420 MHz 3 dBd gain, Ground rods free, 7/16 DIN (female) connector, 450-470 MHz 3 dBd gain, Ground rods free, 7/16 DIN (female) connector, 380-400 MHz 3 dBd gain, Ground rods free, 7/16 DIN (female) connector, 410-430 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Electrical tilt (available) Impedance Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Width Shipping dimensions Weight Actual Shipping weight Length Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range MHz MHz dBd (dBi) Ω dBc degrees W in (mm) in (mm) lbs (kg) lbs (kg) in (mm) in (mm) in (mm) mph (km/h) mph (km/h) °F (°C) 20 335 to 512 vertical 3 (5.1) 0,6 downtilt 50 DC ground -150 Omni-directional 1.4:1 28 500 1.8 (45) 114x4x4 (2896x102x102) 6 (2.7) 35 (15.9) 78 (1981) 7/16 DIN (female) 1.5 (38) 18.5 (470) #130 clamp 135 (217) 175 (282) -40 to +140 (-40 to +60) Ordering Information Specify electrical downtilt option. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.24/61 SC323-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 74/202 Antennas UHF and Tetra Antennas SC329-H Series Collinear omni antenna, 6 dBd gain, 380-480 MHz • • • • Rugged collinear omni designed for reliable operations Available in TETRA and APCO P-25 band splits Low PIM design also available for applications where intermodulation interference is a concern Available with N (male) or N (female) connector Model Description SC329-HT1SNM(G6) SC329-HT2SNM(G6) 3° DT, 380-400 MHz Ground rods free, 410-430 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Electrical tilt (available) Impedance Lightning protection Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Width Shipping dimensions Weight Actual Shipping weight Length Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range MHz MHz 20 380 to 480 vertical 6 (8.1) 0,3,6 50 DC ground Omni-directional 1.5:1 12 300 dBd (dBi) Ω degrees W in (mm) in (mm) lbs (kg) lbs (kg) in (mm) 1.8 (45) 156x3.5x3.5 (3962x89x89) 8 (3.6) 25 (11.4) 143.3 (3639) N (male) 26 (11.8) 1.5 (38) 18 (457) #130 clamp lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) °F (°C) 105 (169) 140 (225) -40 to +140 (-40 to +60) Ordering Information Specify frequency band and connector preference when ordering. Other downtilts are available as Special Assembly. Large downtilts may reduce gain, bandwidth. Order times may vary on these items- please contact Sinclair customer service. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.25/61 SC329-H Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 75/202 Antennas UHF and Tetra Antennas SC329-HL- PIM Certified Series Collinear omni antenna, 6 dBd gain, low PIM, 380-470 MHz • Collinear omni in fiberglass radome, designed for severe wind and ice conditions • 380-430 MHz covers low UHF and the TETRA/APCO P-25 public security bands • Ground rods free versions are available Model Description SC329-HF1LDF(G6) SC329-HF2LDF(G6) SC329-HF3LDF(G6) SC329-HT1LDF(G6) 406-420 MHz 6 dBd gain, 7/16 DIN (female) connector, 450-470 MHz 6 dBd gain, Ground rods free, 7/16 DIN (female) connector, 435-455 MHz 6 dBd gain, Ground rods free, 7/16 DIN (female) connector, 380-400 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Electrical tilt (available) Impedance Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Width Shipping dimensions Weight Actual Shipping weight Length Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Region Telephone E-mail dBd (dBi) Ω dBc degrees W in (mm) in (mm) lbs (kg) lbs (kg) in (mm) lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) 20 380 to 430 vertical 6 (8.1) 0 50 DC ground -150 Omni-directional 1.4:1 12 300 1.8 (45) 168x4x4 (4267x102x102) 8 (3.6) 45 (20.4) 134.3 (3411) 7/16 DIN (female) 25.6 (11.6) 1.5 (38) 18 (457) #130 clamp 90 (145) 125 (201) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.26/61 MHz MHz SC329-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 76/202 Antennas UHF and Tetra Antennas SC381-HL- PIM Certified Series Collinear omni antenna, 6 dBd gain, low PIM, 380-512 MHz • Corporate feed design provides excellent pattern control • Ideally suited for trunked or multichannel UHF systems • Recommend using the SMK-345-A7 side mounting kit. Model Description SC381-HF1LDF SC381-HF2LDF SC381-HF3LDF SC381-HF4LDF 6 dBd gain, 7/16 DIN (female) connector, 380-420 MHz 6 dBd gain, 7/16 DIN (female) connector, 403-470 MHz 6 dBd gain, 7/16 DIN (female) connector, 450-512 MHz 6 dBd gain, 7/16 DIN (female) connector, 430-490 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Passive intermod. (2x20W, 3rd ord.) Pattern Input VSWR (max) Vertical beamwidth Average power input (max) Mechanical Specifications Width Shipping dimensions Weight Actual Shipping weight Length Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Rated wind velocity (1/2" radial ice) Rated wind velocity (no ice) Temperature range Tip deflection MHz MHz dBd (dBi) dBc degrees W in (mm) in (mm) lbs (kg) lbs (kg) in (mm) lbs (kg) in (mm) in (mm) mph (km/h) mph (km/h) °F (°C) degrees 67 380 to 512 vertical 6 (8.1) DC ground -150 Omni-directional 1.5:1 11.5 500 4.5 (114) 171x6x6 (4343x152x152) 47 (21.3) 110 (49.9) 160 (4064) 7/16 DIN (female) 99 (44.9) 5 (127) 24 (610) clamps not supplied 185 (298) 225 (362) -40 to +140 (-40 to +60) 0.6 Ordering Information Specify frequency of operation. Clamp #6C recommended Recommend using the SMK-345-A7 side mounting kit. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.27/61 SC381-HL- PIM Certified Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 77/202 Antennas UHF and Tetra Antennas SG301 Series Ground plane omni antenna, 0 dBd gain, 395-512 MHz • Covers a 20 MHz bandwidth without adjustment • Versatile antenna • Rugged construction and light weight Model Description SG301-SF1SNM SG301-SF2SNM SG301-SF3SNF SG301-SF4SNM SG301-SF5SNM SG301-SF6SNF 0 dBd gain, N (male) connector, 406-420 MHz 0 dBd gain, N (male) connector, 450-470 MHz 0 dBd gain, N (female) connector, 430-450 MHz 0 dBd gain, N (male) connector, 470-490 MHz 0 dBd gain, N (male) connector, 490-512 MHz 0 dBd gain, N (female) connector, 395-410 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Vertical beamwidth Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Temperature range Projected area (Flat Plate Equivalent) Projected area (ice) Lateral thrust (100mph) Bending moment MHz MHz 20 395 to 512 vertical unity (2.1) DC ground Omni-directional 1.5:1 87 100 dBd (dBi) degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 23 (584) 16 (406) 16 (406) 26x4x6 (660x102x152) 2 (0.9) 5 (2.3) N (male) 0.8 (19) 8 (203) #135 clamp in (mm) in (mm) °F (°C) ft² (m²) ft² (m²) lbs (N) ft-lbs (Nm) -22 to +140 (-30 to +60) 0.09 (0.01) 0.33 (0.03) 3.4 (15.3) 0.5 (0.7) Ordering Information Specify frequency of operation. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.28/61 SG301 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 78/202 Antennas UHF and Tetra Antennas SG317 Series Ground plane omni antenna, 2.5 dBd gain, 406-512 MHz • Tunable omni-directional base station antenna • Extremely versatile antennas may be field adjusted to resonance within a 20 MHz bandwidth • Ideal for leased system service Model Description SG317-SF1SNM SG317-SF2SNM SG317-SF3SNM SG317-SF4SNM SG317-SF5SNM 2.5 dBd gain, N (male) connector, 406-420 MHz 2.5 dBd gain, N (male) connector, 450-470 MHz 2.5 dBd gain, N (male) connector, 470-490 MHz 2.5 dBd gain, N (male) connector, 430-450 MHz 2.5 dBd gain, N (male) connector, 490-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Lightning protection Pattern Input VSWR (max) Horizontal beamwidth Vertical beamwidth Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Weight iced Base pipe diameter Base pipe mounting length Mounting hardware Environmental Specifications Temperature range Tip deflection Lateral thrust (100mph) MHz MHz 20 406 to 512 vertical 2.5 (4.6) DC ground Omni-directional 1.5:1 360 35 100 dBd (dBi) degrees degrees W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 41.5 (1054) 18.5 (470) 18.5 (470) 48x7x4 (1219x178x102) 1.5 (0.7) 10 (4.5) N (male) 5.3 (2.4) 0.8 (19) 8 (203) #135B clamp lbs (kg) in (mm) in (mm) °F (°C) degrees lbs (N) -40 to +140 (-40 to +60) 0.1 6.4 (28.5) Ordering Information Specify frequency band of operation. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.29/61 SG317 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 79/202 Antennas UHF and Tetra Antennas ST321 Series Mobile omni antenna, 0 dBd gain, low profile, 406-512 MHz • Compact, low profile • Cast aluminum antenna designed for use in both fixed and mobile installations • Renown for its years of reliable service in very harsh environmental conditions Model Description ST321-SF2SUF ST321-SF3SNF ST321-SF4SUF ST321-SF5SNF ST321-SF5SUF ST321-SF7SUF ST321-SF8SUF ST321-SF9SNF ST321-ST1SNF 0 dBd gain, UHF-female connector, 410-420 MHz 0 dBd gain, N-female connector, 450-465 MHz 0 dBd gain, UHF-female connector, 455-470 MHz 0 dBd gain, N-female connector, 470-485 MHz 0 dBd gain, UHF-female connector, 470-485 MHz 0 dBd gain, UHF-female connector, 430-440 MHz 0 dBd gain, UHF-female connector, 440-450 MHz 0 dBd gain, N-female connector, 420-430 MHz 0 dBd gain, N-female connector, 380-400 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Impedance Lightning protection Pattern Input VSWR (max) Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Connector Mounting hardware Environmental Specifications Temperature range MHz MHz 15 406 to 512 vertical unity (2.1) 50 DC ground Omni-directional 1.5:1 50 dBd (dBi) Ω W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 2.5 (64) 2.5 (64) 7.5 (191) 4.8x7.3x10.8 (121x184x273) 1 (0.5) 3 (1.4) UHF (female) Supplied °F (°C) -40 to +140 (-40 to +60) Ordering Information Specify exact operating frequency and connector option. Available with BNC-female, N-female, and UHF-female connector Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.30/61 ST321 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 80/202 Antennas UHF and Tetra Antennas ST321R Series Mobile omni, 0 dBd gain, low profile, radome, 380-512 MHz • • • • For use in both fixed and mobile installations Renown for its years of reliable service in very harsh environmental conditions Available with white or grey radome Available with N (female) or BNC (female) connector Model Description ST321R-SF1SBF(CWH) ST321R-SF1SNF(CWH) ST321R-SF2SNF(CWH) ST321R-SF3SNF(CGR) ST321R-SF4SNF(CGR) ST321R-SF5SNF(CWH) ST321R-SF6SBF(CGR) ST321R-SF6SNF(CGR) 0 dBd gain, BNC-female connector, 406-420 MHz 0 dBd gain, N-female connector, 406-420 MHz 0 dBd gain, N-female connector, 420-440 MHz 0 dBd gain, N-female connector, 450-470 MHz 0 dBd gain, N-female connector, 470-490 MHz 0 dBd gain, N-female connector, 490-512 MHz 0 dBd gain, BNC-female connector, 380-400 MHz 0 dBd, N (female) connector, 380-400 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Polarization Gain (nominal) Impedance Lightning protection Pattern Input VSWR (max) Average power input (max) Mechanical Specifications Length/ Height Width Shipping dimensions Weight Actual Shipping weight Radome material Length Connector Ground Plane Mounting hardware Environmental Specifications Temperature range MHz MHz 20 380 to 512 vertical unity (2.1) 50 DC ground Omni-directional 1.5:1 30 dBd (dBi) Ω W in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 3 (76) 3.8 (97) 13x8x5 (330x203x127) 2 (0.9) 5 (2.3) ABS (gray) 11.8 (300) BNC (female) 30x30x0.1 (762x762x3) Supplied in (mm) in (mm) °F (°C) Gray model shown. -22 to +140 (-30 to +60) Ordering Information Specify operating frequency and connector option. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.31/61 ST321R Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 81/202 Antennas UHF and Tetra Antennas SUB- UHF Series Mobile omni antenna, 2-6 dBd gain, 406-512 MHz • Rugged ABS housings are UV resistant • Stainless steel fittings • Stands up to severe environmental conditions Model Description SUB-4065 SUB-4066 SUB-4302 SUB-4303 SUB-4305 SUB-4702 SUB-4703 5 dBd gain, 5/8 over 1/2 wave, 406-430 MHz 6 dBd gain, 5/8 over 5/8 wave, 406-430 MHz 2 dBd gain, 1/2 wave, 430-470 MHz 3 dBd gain, 5/8 wave, 430-470 MHz 5 dBd gain, 5/8 over 1/2 wave, 430-470 MHz 2 dBd gain, 1/2 wave, 470-512 MHz 3 dBd gain, 5/8 wave, 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Pattern Average power input (max) Mechanical Specifications Shipping dimensions in (mm) Varies () Environmental Specifications Temperature range °F (°C) -22 to +122 (-30 to +50) www.sinctech.com W 380 to 470 vertical Omni-directional 100 Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.32/61 MHz SUB- UHF Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 82/202 Antennas UHF and Tetra Antennas SUT- UHF Series Mobile omni antenna, 0 dBd gain, 406-512 and 512-970 MHz • Ideal for either mobile or in-building applications, radome-enclosed • Available in either gray or white ABS radome • Additional ground plane required for installation Model Description SUT-4060EX SUT-5120SP 0 dBd gain, 406-512 MHz 0 dBd gain, 512-970 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Polarization Pattern Average power input (max) Mechanical Specifications Shipping dimensions in (mm) Varies () Environmental Specifications Temperature range °F (°C) -22 to +122 (-30 to +50) www.sinctech.com W 380 to 470 vertical Omni-directional 100 Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.33/61 MHz SUT- UHF Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 83/202 Transmitter Combiners UHF and Tetra Transmitter Combiners CTx450F Series Open Cabinet Cavity-Ferrite Transmitter Combiner • High performance Tx combiner for the 406-512 MHz frequency band • Dual isolators and 10 inch high Q 1/4 wave bandpass cavity for each channel • Available in 2 to 8 channels Model Description CT2450F CT3450F CT4450F CT5450F CT6450F 2 channel, 406 to 512 MHz 3 channel, 406 to 512 MHz 4 channel, 406 to 512 MHz 5 channel, 406 to 512 MHz 6 channel, 406 to 512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Input VSWR (max) Power (Per Channel) Frequency separation (min) Isolation Tx to Tx Isolation antenna to Tx Output VSWR Mechanical Specifications Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Finish Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1.25:1 125 0.1 70 60 1.5:1 W MHz dB dB in (mm) in (mm) in (mm) in (mm) lbs (kg) 38 (965) 21 (533) 21 (533) 21x21x42 (533x533x1067) 55 (25) N (female) N (female) chemical conversion °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.34/61 MHz CTx450F Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 84/202 Transmitter Combiners UHF and Tetra Transmitter Combiners RTC5400R Series Trunking Transmitter Combiner, 5 Channels • Different versions support frequency spacings of .8MHz, .4MHz and .2MHz • HP versions of RTC can handle up to 200 Watts per channel • All models fit easily into 19 inch rack Model Description RTC10400RA RTC10400RB RTC10400RC RTC5400RA RTC5400RB RTC5400RC 10 channels, 0.8 MHz separation 10 channels, 0.4 MHz separation 10 channels, 0.2 MHz separation 5 channels, 0.8 MHz separation 5 channels, 0.4 MHz separation 5 channels, 0.2 MHz separation The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Input VSWR (max) Power (Per Channel) Isolation Tx to Tx Isolation antenna to Tx Output VSWR Number of channels MHz 406 to 512 1.25:1 125 70 60 2:1 5 www.sinctech.com W dB dB Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Input connector Output connector Finish Environmental Specifications Temperature range in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 12.3 (311) 19 (483) 14.5 (368) 15x19x22 (381x483x559) 49 (22.2) 55 (25) N (female) N (female) shadow bronze °F (°C) -40 to +140 (-40 to +60) Ordering Information Back mount (B) available only. RA = 0.8 MHz separation with insertion loss of 2.6 dB, RB = 0.4 MHz separation with insertion loss of 3.4 dB, RC = 0.2 MHz separation with insertion loss of 4.5 dB Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.35/61 RTC5400R Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 85/202 Transmitter Combiners UHF and Tetra Transmitter Combiners TC3 Series Hybrid-Ferrite Transmitter Combiner • Supports extremely close frequency spacings • Two channel models easily expanded to four with second 2 channel unit, hybrid coupler and cable • Permit combining four 406-512 MHz transmitters into one antenna Model Description TC3112 TC3114 TC3212 TC3214 2 channels 4 channels 2 channels 4 channels single stage isolator single stage isolator dual stage isolator dual stage isolator The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Input VSWR (max) Power (Per Channel) Frequency separation (max) Frequency separation (min) Mechanical Specifications Width Depth Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1.25:1 125 9 0 W MHz MHz 2 channel model shown in (mm) in (mm) 19 (483) 15.6 (396) N (female) N (female) °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.36/61 MHz TC3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 86/202 Transmitter Combiners UHF and Tetra Transmitter Combiners TJ3 Series Cavity-Ferrite Transmitter Combiner, 7" Cans • Available in 2 to 5 channel 406-512 MHz configurations • Low loss single or dual isolator per channel • Uses high Q bandpass cavity filters Model Description TJ3112 TJ3113 TJ3114 TJ3115 TJ3212 TJ3213 TJ3214 TJ3215 2 channels single stage isolator 3 channels single stage isolator 4 channels single stage isolator 5 channels single stage isolator 2 channels dual stage isolator 3 channels dual stage isolator 4 channels dual stage isolator 5 channels dual stage isolator The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Input VSWR (max) Average power input (max) Frequency separation (min) Isolation Tx to Tx Isolation antenna to Tx Output VSWR MHz 406 to 512 1.25:1 125 0.2 70 60 2:1 W MHz dB dB Mechanical Specifications Input connector Output connector Finish Environmental Specifications Temperature range Region Telephone E-mail °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.37/61 N (female) N (female) shadow bronze TJ3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 87/202 Transmitter Combiners UHF and Tetra Transmitter Combiners TN3 Series Cavity-Ferrite Transmitter Combiner, 8.5" Cans • Available in 2 to 5 channel 406-512 MHz configurations • Low loss single or dual isolator per channel • Very high Q bandpass cavity filter fits horizontally in 19" rack Model Description TN3212 TN3213 TN3214 2 channels, 0.1 MHz minimum Tx-Tx spacing, 406-512 MHz 3 channels, 0.1 MHz minimum Tx-Tx separation, 406-512 MHz 4 channels, 0.1 MHz minimum Tx-Tx separation, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Input VSWR (max) Power (Per Channel) Frequency separation (min) Isolation Tx to Tx Isolation antenna to Tx Output VSWR MHz 406 to 512 1.25:1 125 0.1 70 60 2:1 W MHz dB dB Mechanical Specifications Input connector Output connector Finish Environmental Specifications Temperature range N (female) N (female) shadow bronze °F (°C) -22 to +140 (-30 to +60) Ordering Information Mounting plate and cavities painted Motorola black on standard model Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.38/61 TN3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 88/202 Receiver Multicouplers UHF and Tetra Receiver Multicouplers RM3 Series UHF Bipolar Receive Mulitcoupler • • • • Connects 2 to 8 receivers to a single antenna Power supply options include 115/230 VAC and 12/24/48 VDC Standard 5 MHz preselector with 40 dB of attenuation 10 MHz away from band center 1, 3 or 5 MHz bandwidths available Model Description RM305-104G1B 406-450 MHz, 5 MHz bandwidth, GaAs FET amplifier, 4 channels, 115 VAC power supply, BNC-female outputs UHF Bipolar Receive Multicoupler RM305-108G4B The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Bandwidth Frequency Range Input VSWR (max) Isolation Rx to Rx Output VSWR System gain (min) Noise figure (amplifier (typ)) Noise figure (system (typ)) Third order intercept - amplifier 1 dB Compression point Environmental Specifications Temperature range Region E-mail dB dB dB dB dBm dBm in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 1.8 (45) 19 (483) 10 (254) 23x18x4 (584x457x102) 4.5 (2) 10 (4.5) N (female) BNC (female) °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.39/61 5 406 to 512 1.5:1 25 1.5:1 1 0.8 4.1 39 26 4 channel model shown Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Input connector Output connector Telephone MHz MHz RM3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 89/202 Duplexers UHF and Tetra Duplexer MR354 Series 4 Cavity Compact UHF Mobile Duplexer • • • • Four highly stable temperature compensated resonators Enclosure made of lightweight and rugged aluminum extrusion 50 watts with 50 dB Tx to Rx isolation Available with N-type or BNC-type female connectors Model Description MR354B-1 MR354B-2 MR354B-3 MR354N-1 MR354N-2 MR354N-3 406-440 MHz, BNC connector 440-480 MHz, BNC connector 480-512 MHz, BNC connector 406-440 MHz, N connector 440-480 MHz, N connector 480-512 MHz, N connector The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Frequency separation range Isolation (min) Impedance Input VSWR (max) Average power input (max) Insertion loss (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Finish Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 5 min/ 10 max 50 50 1.5:1 50 1 W dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 1.3 (32) 4.1 (104) 8.8 (222) 13x9x3 (330x229x76) 1.8 (0.8) 2 (0.9) chemical conversion °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.40/61 MHz MHz dB Ω MR354 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 90/202 Duplexers UHF and Tetra Duplexer MR356 Series 6 Cavity Compact UHF Mobile Duplexer • • • • Six highly stable temperature compensated resonators Enclosure made of lightweight and rugged aluminum extrusion 50 Watts average power handling with 75 dB Tx to Rx isolation Available with N-type or BNC-type female connectors Model Description MR356B-1 MR356B-2 MR356B-3 MR356N-1 MR356N-2 MR356N-3 406-440 MHz, BNC connector 440-480 MHz, BNC connector 480-512 MHz, BNC connector 406-440 MHz, N connector 440-480 MHz, N connector 480-512 MHz, N connector The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Isolation (min) Impedance Input VSWR (max) Average power input (max) Frequency separation Insertion loss (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Finish Environmental Specifications Temperature range Region Telephone E-mail 350 to 512 75 50 1.5:1 50 5 1.4 W MHz dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 1.3 (32) 6.3 (159) 8.8 (222) 13x9x3 (330x229x76) 2.5 (1.1) 3 (1.4) chemical conversion °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.41/61 MHz dB Ω MR356 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 91/202 Duplexers UHF and Tetra Duplexer P3880R-CC Series Tetra Band Base Station Duplexer • Passive intermodulation less than 150 dBc • Compact cross-coupled filter technology for space-restricted environments • Insertion loss less than 1.5 dB typical with over 82 dB Tx to Rx isolation Model Description P3880R-CC-1(PBK) P3880R-CC-2(PBK) P3880R-CC-3(PBK) P3880R-CC-4(PBK) Black finish, 8 cavity, 380-395 MHz Black finish, 8 cavity, 382.5-397.5 MHz Black finish, 8 cavity, 385-400 MHz Black finish, 8 cavity, 390-405 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Isolation (min) Impedance Pass bandwidth Input VSWR (max) Peak power input (max) Frequency separation Insertion loss (max) W MHz dB 82 50 5 1.5:1 1522 10 1.5 Mechanical Specifications Connectors Length/ Height Width Depth Shipping dimensions Actual Shipping weight in (mm) in (mm) in (mm) in (mm) lbs (kg) N (female) 3.5 (89) 19 (483) 7.4 (187) 19x7x19 (483x178x483) 50 (22.7) Environmental Specifications Temperature range °F (°C) -22 to +167 (-30 to +75) www.sinctech.com dB Ω MHz Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.42/61 P3880R-CC Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 92/202 Duplexers UHF and Tetra Duplexer Q3220E Series 4 Cavity Compact Res-Lok Q-Circuit UHF Duplexer • Compact design provides excellent performance while conserving rack space • Isolation of greater than 75 dB at 5 MHz separation and less than 1 dB insertion loss • Rugged Res-Lok design reduces inter-cavity cabling Model Description Q3220E Q3220E-PSB standard finnish, 4-cavity, 406-512 MHz Black painted, 4 cavity, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Isolation (min) Impedance Input VSWR (max) Average power input (max) Frequency separation (min) Insertion loss (max) Mechanical Specifications Connectors Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Finish Environmental Specifications Temperature range MHz dB Ω 406 to 512 75 50 1.5:1 350 5 0.8 W MHz dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) N (female) 4.2 (106) 19 (483) 16.3 (414) 19x8x22 (483x203x559) 13.5 (6.1) 25 (11.4) chromate conversion °F (°C) -40 to +140 (-40 to +60) Ordering Information Specify transmit and receive frequencies when ordering. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.43/61 Q3220E Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 93/202 Duplexers UHF and Tetra Duplexer Q3330C Series 6 Cavity Compact Res-Lok Q-Circuit Duplexer • Designed to provide 1 MHz pass band reject notch at 5 MHz separation • Typical minimum isolation of 85 dB at maximum insertion loss of 1.2 dB • Rugged Res-Lok design reduces inter-cavity cabling Model Description Q3330C-1 Q3330C-2 Q3330C-3 Q3330C-4 406-420 MHz 450-470 MHz 420-450 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Isolation (min) Impedance Input VSWR (max) Average power input (max) Frequency separation (min) Insertion loss (max) Mechanical Specifications Connectors Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Finish Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 85 50 1.3:1 350 5 1.2 W MHz dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) N (female) 4.2 (107) 19 (483) 16.3 (414) 19x8x22 (483x203x559) 16 (7.3) 25 (11.4) chemical conversion °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.44/61 MHz dB Ω Q3330C Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 94/202 Duplexers UHF and Tetra Duplexer Q3330E Series 6 Cavity Res-Lok Q-Circuit Duplexer • Designed to provide 1 MHz pass band reject notch at 5 MHz separation • Typical minimum isolation of 85 dB at maximum insertion loss of 1.3 dB • Rugged Res-Lok design reduces inter-cavity cabling Model Description Q3330E-1 Q3330E-2 Q3330E-3 Q3330E-4 406-420 MHz 420-450 MHz 450-470 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Isolation (min) Impedance Input VSWR (max) Average power input (max) Frequency separation (min) Insertion loss (max) Mechanical Specifications Connectors Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Finish Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 85 50 1.5:1 350 5 1.2 W MHz dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) N (female) 8.3 (211) 19 (483) 11.4 (290) 19x8x22 (483x203x559) 23 (10.4) 25 (11.4) chromate conversion °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.45/61 MHz dB Ω Q3330E Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 95/202 Cavity Filters UHF and Tetra Bandpass Cavities FP30107 Series High-Q Bandpass 1/4 wave Cavity Filter, Single 7" Can • Aluminum cylinder with brass and copper coaxial inner conductor • Silver plating and chromate conversion coating limit corrosion and enhance performance • Temperature compensated for extremely low frequency drift Model Description FP30107-1 FP30107-2 FP30107-3 FP30107-3-PSB 225-300 MHz 300-400 MHz 406-512 MHz Paint shadow bronze, 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Impedance Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Number of cavities Input connector Output connector Finish Environmental Specifications Temperature range Region Telephone E-mail 225 to 512 50 80-350 in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 18 (457) 7 (178) 7 (178) 9x9x24 (229x229x610) 6 (2.7) 10 (4.5) 1 N (female) N (female) chromate conversion °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.46/61 MHz Ω W FP30107 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 96/202 Cavity Filters UHF and Tetra Bandpass Cavities FP30109 Series High-Q Bandpass 1/4 wave Cavity Filter, Single 8.5" Can • Aluminum cylinder silver plated brass coaxial inner conductor • Silver plating and chromate conversion coating limit corrosion and enhance performance • Temperature compensated for extremely low frequency drift Model Description FP30109-3 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Impedance Input VSWR (max) Average power input (max) Insertion loss (min) Insertion loss (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Number of cavities Input connector Output connector Finish Mounting configurations Environmental Specifications Temperature range MHz Ω 406 to 512 50 1.5:1 80-350 0.5 3 W dB dB in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 8.8 (222) 19 (483) 13.5 (343) 9x9x24 (229x229x610) 11.3 (5.1) 10 (4.5) 1 N (female) N (female) shadow bronze 19 inch rack °F (°C) -22 to +140 (-30 to +60) Ordering Information Standard model painted Motorola black Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.47/61 FP30109 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 97/202 Cavity Filters UHF and Tetra Q-Circuit Cavities FQ30107 Series High Q Circuit 1/4 wave Cavity Filter, Single 7" Can • Aluminum cylinder with brass and copper coaxial inner conductor • Silver plating and chromate conversion coating limit corrosion and enhance performance • Temperature compensated for extremely low frequency drift Model Description FQ30107-3 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Impedance Input VSWR (max) Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Number of cavities Input connector Output connector Mounting configurations Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 50 1.5:1 350 W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 16.6 (422) 7 (178) 7 (178) 21x9x9 (533x229x229) 6 (2.7) 10 (4.5) 1 N (female) N (female) 19 inch rack °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.48/61 MHz Ω FQ30107 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 98/202 Cavity Filters UHF and Tetra Reject Cavities FR30107 Series High-Q Notch 1/4 wave Cavity Filter, Single 7" Can • 7 inch diameter aluminum cylinder with brass and copper coaxial inner conductor • Silver plating and chromate conversion coating limit corrosion and enhance performance • Temperature compensated for extremely low frequency drift Model Description FR30107-3 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Input VSWR (max) Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1.5:1 350 W in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 17.5 (445) 7 (178) 7 (178) 21x9x9 (533x229x229) 6 (2.7) 10 (4.5) N (female) N (female) °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.49/61 MHz FR30107 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 99/202 Preselector Filters UHF and Tetra Preselectors FP30401 Series Compact Surface Mounted 1, 3 or 5 MHz Preselector • Suitable for most standard multicoupling requirements • Can be mounted directly on 1.75 " high receiver multicoupler tray • Covers 406-512 MHz frequency range with wide range of sub-bands available Model Description FP30401B-1-1 FP30401B-1-3 FP30401B-1-5 FP30401B-2-1 FP30401B-2-3 FP30401B-2-5 FP30401B-3-1 FP30401B-3-3 1 MHz bandwidth, BNC connectors, 406-430 MHz, 3 MHz bandwidth, BNC connectors, 406-440 MHz 5 MHz bandwidth, BNC connectors, 406-450 MHz 1 MHz bandwidth, BNC connectors, 440-470 MHz 3 MHz bandwidth, BNC connectors, 440-480 MHz 5 MHz bandwidth, BNC connectors, 450-480 MHz 1 MHz bandwidth, BNC connectors, 480-512 MHz 3 MHz bandwidth, BNC connectors, 480-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Approx Bandwidth @ 50 dB Frequency Range Input VSWR (max) 25 406 to 512 1.5:1 Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 1.3 (33) 4.2 (107) 7.5 (191) 13x9x3 (330x229x76) 1.5 (0.7) 2 (0.9) Environmental Specifications Temperature range °F (°C) -22 to +140 (-30 to +60) www.sinctech.com MHz MHz Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.50/61 FP30401 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 100/202 Preselector Filters UHF and Tetra Preselectors PH3040 Series Highly Versatile Res-Lok Preselector • Rack, wall or floor mounting versions available • Res-Lok construction reduces inter-cavity cabling • Covers the 406-512 MHz frequency band Model Description PH3040E-1-2 PH3040E-1-3 PH3040E-2-1 PH3080E-1-1 Preselector, Res-Lok, 2 MHz BW Preselector, Res-Lok, 3 MHz BW, 406-440 MHz Highly Versatile 1 MHz Res-Lok Preselector Highly Versatile Res-Lok Preselector The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Input VSWR (max) Average power input (max) www.sinctech.com Mechanical Specifications Length/ Height Width Depth Weight Input connector Output connector Mounting configurations Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1.5:1 400 W in (mm) in (mm) in (mm) lbs (kg) 4.2 (106) 19 (483) 16.3 (414) 14 (6.4) N (female) N (female) 19 inch rack °F (°C) -22 to +140 (-30 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.51/61 MHz PH3040 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 101/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3019 Series C Series Pass-Reject Expandable Multicoupler, 8.5" Cans • Two cavities wide fits horizontally on 19" rack • Combines transmitters or receivers with inter-channel spacing down to 500 KHz • High selectivity ideally suited for applications where significant expansion is contemplated Model Description C3019-1 C3019-2 C3019-3 C3019-4 C3019-5 406-415 MHz 415-430 MHz 430-450 MHz 450-470 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Average power input (max) Frequency separation (min) Insertion loss (min) Insertion loss (max) Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range MHz W 406 to 512 300 1.5:1 80-300 0.5 0.7 3.2 W MHz dB dB lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 21 (9.5) 8.8 (222) 19 (483) 13 (330) 23x23x12 (584x584x305) 35 (15.9) N (female) N (female) °F (°C) -22 to +140 (-30 to +60) Ordering Information Mounting plate and cavities painted Motorola black on standard model Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.52/61 C3019 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 102/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3024 Series C-Series Res-Lok Pass-Reject Expandable Multicoupler, 406-512 MHz • • • • Ease of field expandability with non-critical inter-channel cable lengths Res-Lok design reduces inter-cavity cable requirements and losses Supports vertical or horizontal mounting in 19 inch rack Insertion loss of 1.4 dB or 2.5 dB Model Description C3024-1-1.4 C3024-1-2.5 C3024-2-1.4 C3024-2-2.5 C3024-3-1.4 C3024-3-2.5 406-440 MHz, 1.4 dB IL 406-440 MHz, 2.5 dB IL 440-475 MHz, 1.4 dB IL 440-475 MHz, 2.5 dB IL 475-512 MHz, 1.4 dB IL 475-512 MHz, 2.5 dB IL The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Average Input Power (max) Frequency separation (min) Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1000 1.5:1 190-300 1 W MHz lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 13 (5.9) 4.2 (106) 19 (483) 14 (356) 19x8x22 (483x203x559) 25 (11.4) N (female) N (female) °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.53/61 MHz W C3024 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 103/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3027 Series C Series Pass-Reject Expandable Multicoupler, 7" Cans • Two bandpass cavities and one reject cavity • Combines transmitters or receivers with inter-channel spacing down to 1 MHz • High selectivity ideally suited for applications where significant expansion is contemplated Model Description C3027-1 C3027-2 C3027-3 C3027-4 C3027-5 406-415 MHz 415-430 MHz 430-450 MHz 450-470 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Average Input Power (max) Frequency separation (min) Insertion loss (min) Insertion loss (max) Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 300 1.25:1 150-300 1 1.2 3.2 W MHz dB dB lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 35 (15.9) 16 (406) 19 (483) 14.9 (378) 21x17x22 (533x432x559) 45 (20.4) N (female) N (female) °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.54/61 MHz W C3027 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 104/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3029 Series C Series Pass-Reject Expandable Multicoupler, 8.5" Cans • Two cavities wide fits horizontally on 19" rack • Combines transmitters or receivers with inter-channel spacing down to 500 KHz • High selectivity ideally suited for applications where significant expansion is contemplated Model Description C3029-1 C3029-2 C3029-3 C3029-4 C3029-5 406-415 MHz 415-430 MHz 430-450 MHz 450-470 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Average power input (max) Frequency separation (min) Insertion loss (min) Insertion loss (max) Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range MHz W 406 to 512 300 1.5:1 150-300 0.5 1.2 3.2 W MHz dB dB lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 32 (14.5) 17.5 (445) 19 (483) 18 (457) 23x23x12 (584x584x305) 70 (31.8) N (female) N (female) °F (°C) -22 to +140 (-30 to +60) Ordering Information Mounting plate and cavities painted Motorola black on standard model Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.55/61 C3029 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 105/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3034 Series Res-Lok C Series Pass-Reject Exp Multicoupler • Ease of field expandability with non-critical cable lengths • Reduces inter-cavity cable requirements • Supports vertical or horizontal mounting in 19 inch rack Model Description C3034-1-1.6 C3034-1-3.1 C3034-2-1.6 C3034-2-3.1 C3034-3-1.6 C3034-3-3.1 Exp multicoupler, Res-Lok, pass-reject, 1.6 dB IL Exp multicoupler, Res-Lok, pass-reject, 3.1 dB IL Exp multicoupler, Res-Lok, pass-reject, 1.6 dB IL Exp multicoupler, Res-Lok, pass-reject, 3.1 dB IL Exp multicoupler, Res-Lok, pass-reject, 1.6 dB IL Exp multicoupler, Res-Lok, pass-reject, 3.1 dB IL The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Frequency separation (min) www.sinctech.com Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 1000 1.5:1 1 MHz lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 13 (5.9) 4.2 (106) 19 (483) 14 (356) 19x8x22 (483x203x559) 25 (11.4) N (female) N (female) °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.56/61 MHz W C3034 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 106/202 Expandable Multicouplers UHF and Tetra Exp. Multicouplers C3037 Series C Series Pass-Reject Expandable Multicoupler, 7" Cans • Three bandpass cavities and one reject cavity • Combines transmitters or receivers with inter-channel spacing down to 1 MHz • High selectivity ideally suited for applications where significant expansion is contemplated Model Description C3037-1 C3037-2 C3037-3 C3037-4 C3037-5 406-415 MHz 415-430 MHz 430-450 MHz 450-470 MHz 470-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. www.sinctech.com Electrical Specifications Frequency Range Thru Line Average Power (max) Input VSWR (max) Average Input Power (max) Frequency separation (min) Insertion loss (min) Insertion loss (max) Mechanical Specifications Net Weight Length/ Height Width Depth Shipping dimensions Actual Shipping weight Input connector Output connector Environmental Specifications Temperature range Region Telephone E-mail 406 to 512 300 1.5:1 185-300 1 1.7 3.2 W MHz dB dB lbs (kg) in (mm) in (mm) in (mm) in (mm) lbs (kg) 32 (14.5) 16 (406) 19 (483) 14.9 (378) 21x17x22 (533x432x559) 45 (20.4) N (female) N (female) °F (°C) -40 to +140 (-40 to +60) United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.57/61 MHz W C3037 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 107/202 Tower Top Amplifiers UHF and Tetra Tower Top Amplifiers TM3 Series Low-Loss Tower Top Amp/Receiver Multicoupler • Includes low-loss wide-band preselector and pre-ampilfier • Single amp, relay bypass or redundant amp options • Typical 0.6 dB Noise Figure with GasFet amp Model Description TM303-1A01G1N 406-440 MHz, 3 MHz preselector, 1 channel, GaAs FET amplifier, 115 VAC supply 406-440 MHz, 3 MHz preselector, redundant amplifier, 1 channel, Si bipolar amplifier, 115 VAC supply 406-450 MHz, 5 MHz preselector, 20 channels, GaAs FET amplifier, 115 VAC supply 406-450 MHz, 5 MHz preselector, bypass option, 20 channels, Si bipolar amplifier, 115 VAC supply TM303-1C01S1N TM305-1A20G1B TM305-1B20S1B The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Input VSWR (max) Isolation Rx to Rx Output VSWR System gain (min) Noise figure (system (typ)) Third order intercept - amplifier 1 dB Compression point dB dB dBm dBm 406 to 512 1.5:1 25 1.5:1 14 5 30 20 Mechanical Specifications Height - base unit Width - base unit Depth - base unit Height - tower top unit Width - tower top unit Depth - tower top unit Weight - tower top unit in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) lbs (kg) 3.5 (89) 19 (483) 6 (152) 16 (406) 12 (305) 7.2 (183) 39 (17.7) Environmental Specifications Temperature range °F (°C) -22 to +140 (-30 to +60) www.sinctech.com MHz dB Ordering Information System noise figure and stated maximum gain do not include the effects of feedline cabling. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.58/61 TM3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 108/202 Hybrid Couplers UHF and Tetra Hybrid Couplers HH3 Series Hybrid Coupler, 406-512 MHz • • • • Rugged N Female / N Male design Max insertion loss of 3.3 dB per port VSWR less than 1.25 for T1 to T2 ports Available in various splits (i.e. 50/50, 70/30 or 80/20) Model Description HH3140 HH3140B HH3141HP N male and N female connectors, 406-512 MHz N female connectors, 406-512 MHz 406-512 MHz The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Frequency Range Isolation (min) Impedance VSWR Power Rating Insertion loss (max) W dB 406 to 512 45 50 1.25:1 350 3.3 Mechanical Specifications Length/ Height Width Depth Shipping dimensions Weight Actual Shipping weight in (mm) in (mm) in (mm) in (mm) lbs (kg) lbs (kg) 1.2 (30) 7 (178) 1 (25) 13x9x3 (330x229x76) 0.8 (0.4) 3 (1.4) Environmental Specifications Temperature range °F (°C) -22 to +140 (-30 to +60) www.sinctech.com MHz dB Ω Photo is a representation, not an exact model Ordering Information T1 to T2 inputs N Male- Load and antenna termination N Female. Specify operating frequencies. HH-3140 specs shown at series level. Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.59/61 HH3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 109/202 Isolators and Circulators UHF and Tetra Isolators & Circulators I3 Series Compact Rugged Isolator/Circulator, 406-512 MHz • Carefully temperature compensated • Low insertion loss • Highly relaible design with top quality sub-components Model Description I3111A I3111T I3112A I3112T I3113A I3211A I3212A I3212T I3213A Isolator, single, 15 watt load Isolator, single, 15 watt load, tunable Isolator, single, 30 watt load Isolator, single, 30 watt load, tunable Isolator, single, 60 watt load Isolator, dual, 15 watt + 15 watt load Isolator, dual, 15 watt + 30 watt load Isolator, dual, 15 watt + 30 watt load, tunable Isolator, dual, 15 watt + 60 watt load The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range VSWR Power Input W 12 406 to 512 1.25:1 125 Mechanical Specifications Connectors Length/ Height Width Shipping dimensions Weight Actual Shipping weight in (mm) in (mm) in (mm) lbs (kg) lbs (kg) N Female 2.5 (64) 2.5 (64) 13x9x3 (330x229x76) 1.1 (0.5) 2 (0.9) Environmental Specifications Temperature range °F (°C) -22 to +140 (-30 to +60) www.sinctech.com MHz MHz Ordering Information Height, width, depth and weight excludes connectors and loads Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.60/61 I3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 110/202 Intermod Supression Panels UHF and Tetra IM Suppression Pannels PC3 Series Rack Mounted Ferrite Intermod Suppression Panel • High performance single or dual stage isolators provide 35 dB or 75 dB of isolation • Covers 406-512 MHz band and comes with built-in harmonic filters • Compact design shipped precisely tuned to customer specified frequency Model Description PC3114 PC3214 406-512 MHz, single stage isolator, 125 W load 406-512 MHz, dual stage isolator, 125 W load The specifications listed below represent the entire product series. For specifications on a specific model, visit our web site at www.sinctech.com or view our CD catalogue. Electrical Specifications Bandwidth Frequency Range VSWR Average power input (max) Mechanical Specifications Length/ Height Width Depth Shipping dimensions Actual Shipping weight in (mm) in (mm) in (mm) in (mm) lbs (kg) 3.5 (89) 19 (483) 9.1 (232) 26x19x7 (660x483x178) 20 (9.1) Environmental Specifications Temperature range °F (°C) -22 to +140 (-30 to +60) www.sinctech.com W 12 406 to 512 1.25:1 125 Region Telephone E-mail United States Europe, Middle East and Africa Caribbean and Latin America USA: 1 800 263 3275 International: +44 (0) 1223 42 03 03 International: +1 905 726 7676 [email protected] [email protected] [email protected] Product Specification Sheet AN.AHT.61/61 MHz MHz PC3 Sinclair’s commitment to product leadership may result in improvement or change to this product Copyright © Sinclair Technologies Canada and rest of the world Canada: 1 800 263 3275 International: +1 905 727 0165 [email protected] Dated: 10-09-09 Page 111/202 SINCLAIR TECHNOLOGIES INC. – TERMS AND CONDITIONS OF SALE “INCOTERMS” shall mean the international rules for the interpretation of trade terms of the International Chamber of Commerce as in force at the date when the contract for the sale and purchase of the Products is made. “The Products” shall mean any products or services supplied by the Supplier. not responsible for selecting the cheapest or fastest routing. Claims for shortages, other than loss in transit, must be made within thirty (30) days of shipment from Supplier’s premises. 6. Claims for Damage or Loss in Transit 6.1 “The Purchaser” shall mean the person, firm or company purchasing the products or services supplied by the Supplier. “The Supplier” shall mean Sinclair Technologies Inc. 1. Basis of Sale 1.1 The Supplier shall sell and the Purchaser shall purchase the Products in accordance with an accepted written quotation from the Supplier or an accepted written purchase order from the Purchaser. In each case the relevant sale and purchase contract shall be subject to these terms and conditions, which shall govern the contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted, or any such order is made or purported to be made by the Purchaser. 1.2 No variation to these terms and conditions shall be binding unless agreed in writing between the authorized representatives of the parties. 1.3 The Supplier’s employees or agents are not entitled to give or make any undertakings, representations or warranties concerning the Products other than as set out in current standard specifications of the Supplier or as specifically authorized by an officer of the Supplier in writing. 7. Delays 7.1 7.2 All purchase orders should be directed to the Supplier at its above address giving all information necessary to process the Purchaser’s order and the Purchaser will be responsible to the Supplier for ensuring the accuracy of the terms of any order submitted by the Purchaser. 2.2 No order submitted by the Purchaser shall be deemed to be accepted by the Supplier unless and until confirmed in writing by the Supplier’s authorized representative by way of acknowledgement of order. 2.3 If the Products are to be manufactured or any process is to be applied to the Products by the Supplier in accordance with a specification submitted by the Purchaser, the Purchaser shall indemnify the Supplier against all loss, damages, costs and expenses awarded against or incurred by the Supplier in connection with or paid or agreed to be paid by the Supplier in settlement of any claim for infringement of any patent, copyright, design, trade mark or other industrial or intellectual property rights of any other person which results from the Supplier’s use of the Purchaser’s specification. 2.4 7.4 If the Supplier fails to deliver the Products for any reason other than any cause beyond the Supplier’s reasonable control or default by the Purchaser, any liability of the Supplier shall be limited to the excess (if any) of the cost to the Purchaser (in the cheapest available market) of similar products to replace those not delivered over the price of the Supplier’s Products. 8. Title 8.1 Notwithstanding delivery and the passing of risk in the Products, or any other provisions of these terms and conditions, title and property in the Products shall not pass to the Purchaser until the Supplier has received in cash or cleared funds payment in full of the price of the Products and all other products agreed to be sold by the Supplier to the Purchaser for which payment is then due. 8.2 Until property and title has passed the Purchaser shall keep the Products properly insured to their full value. 8.3 Until such time as title and property in the Products passes to the Purchaser (and provided the Products are still in existence and have not been resold), the Supplier shall be entitled at any time to require the Purchaser to deliver up the Products to the Supplier and, if the Purchaser fails to do so forthwith, to enter on the Purchaser’s premises or those of any third party where the Products are stored and take all appropriate steps to repossess them. 2.5 2.5.2 Changes to acknowledged orders will only be accepted upon terms that protect the Supplier against loss. 3. Price 3.1 The price of the Products shall be the Supplier’s quoted price or, where no price has been quoted (or a quoted price is no longer valid), the price listed in the Supplier’s published price list current at the date of acceptance of the order less any agreed discount currently applicable to the Purchaser. All prices quoted are valid unless otherwise specified in the quotation for 30 days only or until earlier acceptance by the Purchaser, after which they may be altered by the Supplier without giving notice to the Purchaser. 4. Payment Terms 4.1 All orders are subject to credit approval before acceptance. Time of payment shall be of the essence of the contract. Interest of 2% per month will be charged on all overdue accounts (both before and after judgement). Prices do not include sales or value added taxes for which the Purchaser will be responsible. Unless otherwise agreed, payment will be cash in advance prior to shipment. Shipments will be made on open account only after approval by our Credit Department. Where open account is approved, Terms are net 30 days from date of invoice. 4.2 Terms may be subject to change without notice to the Purchaser to reflect any increase in the cost to the Supplier due to any factor beyond the Supplier’s control (such as without limitation any foreign exchange fluctuation, currency regulation, alteration of duties or significant increase in the costs of labour, materials or other costs of manufacture). 5. Shipment/Carriage 5.1 All shipments are FOB Supplier’s premises. Carriage, insurance and freight charges are collect and for the Purchaser’s account unless otherwise specified. If carrier is unspecified, Supplier is The Supplier shall not be liable for inability to fulfil contractual obligations when the causes thereof are due to act of God, explosion, storm or lightning damage, flood, tempest, fire or accident, war, riot, sabotage, terrorist acts, acts of government, import or export regulations or embargoes, strikes, lock outs or other industrial actions or trade disputes, difficulties in obtaining raw materials, labour, fuel, parts or machinery, power failure or breakdown in machinery or any other act or matter beyond the Supplier’s reasonable control. Where Products are to be delivered in instalments, each delivery shall constitute a separate contract and failure by the Supplier to deliver any one or more of the instalments in accordance with these terms and conditions or any claim by the Purchaser in respect of any one or more instalment shall not entitle the Purchaser to treat the contract as a whole as repudiated. The Supplier reserves the right to make any changes in the specification of the Products which are required to conform with any applicable safety or other statutory requirements or which do not materially affect their quality or performance. 2.5.1 No order which has been accepted by the Supplier may be cancelled by the Purchaser except with the Supplier’s written agreement and on terms that the Purchaser shall indemnify the Supplier in full against all loss (including loss of profit), costs (including costs of all labour and materials used), damages, charges and expenses incurred by the Supplier as a result of cancellation and sales applicable. In the case of specially engineered or customized Products the full amount will be charged. Dates for delivery of the Products are approximate only and the Supplier shall not be liable for any delay howsoever caused. Time shall not be of the essence in respect of delivery. 7.3 2. Orders and Specifications 2.1 Claims for damage or loss incurred in transit must be made immediately by the Purchaser against the carrier. Though the Supplier has no liability, if requested, the Supplier will assist in the Purchaser’s claim against the carrier provided the Purchaser indemnifies the Supplier against any loss or expense incurred by the Supplier in so doing. 8.4 The Purchaser shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the Products which remain the Supplier’s property. 9. Repairs 9.1 Authorization must be obtained before returning any material for repair. Items not covered under warranty provisions will be subject to a minimum service charge. 10. Limited Warranty 10.1 Supplier’s antenna Products are warranted against defects in materials and workmanship under normal use and service for a period of five years from date of shipment for all mechanical and electrical performance rating with the exception of low passive intermodulation (“PIM”) rated antennas for which the PIM rating is warranted for two years from date of shipment. Antenna PIM ratings may be affected over time by exposure to harsh environmental conditions. Supplier’s filter Products and systems are warranted against defects in material and workmanship under normal use and service for a period of two years from date of shipment. This limited warranty does not extend to any Products that have been subject to misuse, neglect, accident, improper installation or application, nor shall it extend to Products which have been repaired or altered outside Supplier’s factory. In the event of a defect covered by this limited warranty, Supplier’s sole obligation and Purchaser’s sole remedy shall be that Supplier, upon receipt of the defective Product, shall either repair or replace, at its option, the defective Product and return it to the Purchaser. Supplier shall not be liable under any circumstances for any special, indirect consequential, incidental, punitive or exemplary damages arising out of or in any way connected with its lost profits, loss of use, lost data or for any damages or sums paid by Purchaser to third parties, even if Supplier has been advised of the possibility of such damages. The foregoing limitation of liability shall apply whether any claim is based upon principles of contract, warranty, negligence or other tort, breach of any statutory duty, principles of indemnity or contribution, the failure of any limited or exclusive remedy to achieve its essential purpose, or otherwise. Supplier is not liable for replacement of any product damaged by lightning, wind or any other act of God or other event beyond the Supplier’s reasonable control. No Product may be accepted for replacement or repair without written prior authorization from Supplier. All shipping charges on returned Product are the Purchaser’s responsibility and must be prepaid. Product replacement or repair is subject to an examination by Supplier concluding that the Product was defective at the time of manufacture. Except for the limited warranty set out above, 10.2 For the avoidance of doubt the Supplier shall be under no Supplier does not make, and hereby expressly disclaims, any and all other express and implied warranties, including, but not limited to warranties of merchantability, fitness for a particular purpose and any and all warranties arising from trade practice, custom or any other legal theory. 11. Insolvency of Purchaser 11.1 This clause applies if:11.1.1 The Purchaser makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or 11.1.2 An encumbrancer takes possession, or a receiver or administrative receiver is appointed, of any of the property or assets of the Purchaser; or 11.1.3 The Purchaser ceases, or threatens to cease to carry on business; or 11.1.4 The Supplier reasonably apprehends that any of the events mentioned above is about to occur in relation to the Purchaser and notifies the Purchaser accordingly. 11.2 If this clause applies then, without prejudice to any right or remedy available to the Supplier, the Supplier shall be entitled to cancel the contract or suspend any further deliveries under the contract without any liability to the Purchaser, and if the Products have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary. 12. Third Party Intellectual Property Rights - Indemnity 12.1 The Supplier shall indemnify the Purchaser against any claims for infringement of any third party intellectual property rights arising from the Products or the use of any of the Products; provided, however, that the Supplier shall in no event be liable for damages or loss of a consequential nature, including loss of profit. This indemnity shall not apply to any infringement based on compliance with specifications or instructions of the Purchaser or on any use of the Products not stipulated in the contract or on any use of the Products in association or combination with equipment not supplied by the Supplier. This indemnity is further conditional upon the Purchaser giving to the Supplier the earliest possible written notice of any claim being made or action threatened or brought against the Purchaser, conditional upon the Purchaser not having made any admission which might be prejudicial to such claim or action and upon the Purchaser permitting the Supplier at the Supplier’s own expense to conduct any ensuing litigation and all negotiations for a settlement of the claim. The Supplier shall be entitled to modify or replace any infringing items so that they become non-infringing. The Purchaser shall be obliged to take such steps as the Supplier may reasonably request, and to use its best endeavours, to mitigate the effect of any claim. 13. General 13.1 If any provision of these terms and conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these terms and conditions and the remainder of the provision in question shall not be affected thereby. 13.2 Please supply Supplier correct shipping information including address and postal code with your order and indicate your preference for transportation and insurance. 13.3 When ordering, give operating frequencies to the nearest kHz (Example: 456.272MHz). Components are tuned and tested at exact specified operating frequencies, as required. Your order cannot be properly processed without this information. 13.4 The contract shall be governed by the laws of Ontario, Canada and each party hereby submits to the non-exclusive jurisdiction of the Ontario courts. Oct.’07 10 Superior then, Superior now. R S C C E L I A B I L I T Y E C U R I T Y U S T O M I Z AT I O N O V E R A G E Sinclair provides antennas, filters, combining systems, and radio coverage solutions for RF telecommunications networks. Designed to function in extreme weather conditions, Sinclair’s products enjoy a reputation for high performance, reliability, durability and value. We have been serving our markets with new innovative products since 1951. Sinclair Technologies www.sinctech.com Distributed in the United States by: Distributed in Canada by: Tessco Technologies Tel: (800) 508-5444 Mobile Trends Tel: (800) 665-2955 www.tessco.com www.mobiletrends.ca Primus Electronics Corp Tel: (800) 435-1636 Omni Provincial Electronics Tel: (877) 291-9633 www.primuselectronics.com www.omnipro.ca Talley Communications Tel: (800) 949-7099 Production électronique inc. Tel: (877) 359-0523 www.talleycom.com www.productionelectronique.com Motorola U.S.A. Tel: (800) 422-4210 x 6883 Waverunner Communications Tel: (888) 561-1113 www.motorola.com www.waverun.net U.S.A. Tel: 1(800) 263-3275 Fax: 1(716) 874-4007 Canada Tel: 1(800) 263-3275 Fax: 1(800) 668-7416 Europe, Middle East and Africa Tel: 44(0)1223 42 03 03 Fax: 44(0)1223 42 06 06 Asia Tel: 1(905) 727-0165 Fax: 1(905) 841-6255 Caribbean and Latin America Tel: 1(905) 726-7676 Fax: 1(905) 841-6255