Transcript
Wireless Solutions
5.1
5.2
5.3
5.4
Wireless LAN & Wireless Modem
P5-1-1
‧Wireless LAN
P5-1-3
‧Wireless Modems
P5-1-5
GPRS/GSM Wireless Products
P5-2-1
‧Modems
P5-2-3
‧Intelligent GPRS/GSM Modules
P5-2-7
‧Mini-Programmable Automation Controllers
P5-2-9
ZigBee Wireless Products
P5-3-1
‧ZigBee Converters
P5-3-3
‧ZigBee Repeaters
P5-3-7
External Antenna
P5-4-1
‧Applications
P5-4-1
‧2.4 GHz Omni-directional Antennas
P5-4-3
‧2.4 GHz Directional Antennas
P5-4-5
‧Power Amplifiers
P5-4-7
Overview
5
5.1. Wireless LAN & Wireless Modems
Wireless Solutions
Wireless LAN
1 Wireless LAN & Wireless Modems
Nowadays, Wireless LAN applications are very popular. They’re not only faster than traditional industrial transmissions, i.e. RS-232, RS-485, RS-422 etc, but are also able to minimize the need for troublesome wiring tasks and have a higher mobility than an Ethernet network. By taking full advantage of the integrated Web Server capability, configuration of the T-316 can easily be performed via a simple Web browser user interface.
CF Overview
5-1-1
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Wireless Modems
5 Wireless Solutions
1
The SST-2450 is based on a direct sequence spread spectrum using RF technology, operating in the ISM bands with a frequency range of 2410.496 MHz to 2471.936 MHz and a channel spacing of 4.096 MHz.
Wireless LAN & Wireless Modems
The SST-2450 is a spread spectrum radio modem with an RS-232/RS-485 interface port and is designed for data acquisition and control applications between a host and remote sensors. It is also useful for those applications where the installation of cable wire is inconvenient. The SST-2450 can be used not only in peer-to-peer mode, but also in a multi-point structure.
CF Overview
Website: http://www.icpdas.com
E-mail:
[email protected]
5-1-2
Wireless LAN
PCI
5
Features
Wireless Solutions
802.11b Ethernet Client Web-based Configuration Web-based Firmware Upgrades 64/128-bit WEP No Driver Installation Required Plug and Play Operation Directional 6dBi Gain Antenna AP Priority List Small and Compact
T-316
DIN-Rail Mountable 128 bytes bytes Hardw Hardware are F FIFO IFO ffor or Ea Each ch Po Port rt
Smart WLAN Ethernet Client
Introduction The T-316 is an Ethernet LAN to wireless LAN converter. It requires no software or drivers to be installed and the configuration process is very simple. The current hardware system or currently running programs do not need to be modified in order to enjoy the benefits of wireless transmission.
Operating Modes
1
Ad-hoc Mode
Infrastructure Mode
Wireless LAN & Wireless Modems
An Ad-hoc network is formed using a number of wireless stations (without an Access Point) and communicates via radio waves. For the user, the shared resources on the wireless network appear exactly as they would on a regular wired network. The wireless operation of the network is totally transparent.
An Infrastructure network is formed using a number of stations together with one or more Access Points (APs), with the stations positioned within a set distance from the AP. This mode supports long distance transmissions.
Applications
PC
μPAC-7186EXD
T-316
T-316
Ethernet
Wi-Fi T-316
XP-8041
Ethernet
M-7000
I-7000 RS-485
CF
Ethernet Remote I/O Modules
T-316
T-316
iP-8441
RU-87P4 RS-485
Ethernet
5-1-3
ICP DAS CO., LTD
Remote I/O Units
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Specifications
5
Wireless IEEE 802.11b DSSS (2.4 GHz ISM radio band)
Standard Data Rate
Wireless Solutions
11 Mbps, 5.5 Mbps, 1 Mbps (Auto scaling)
Transmit Power
+15 dBm (typical)
Data Rate Sensitivity
Modulation
11 Mbps
-84 dBm
5.5 Mbps
-87 dBm
1 Mbps
-90 dBm
11 Mbps 5.5 Mbps
CCK CCK
1 Mbps
DBPSK
Antenna
Internal patch antenna with diversity
Transmission Range
100 m
General System Interface
Ethernet (RJ-45)
LAN
802.3 compliant for wired LAN
LED Indicators Power
Yes
RF Activity
Yes
LAN Activity
Yes
Power Operating Voltage
+3.3 VDC +/-5 % or +5.0 VDC +/-5 %
Current Consumption
500 mA (max.)
Mechanical Dimensions (W x H x D)
72 mm x 108 mm x 35 mm
Weight
250 g
Environment Operating Temperature
0 °C ~ +55 °C
Humidity
10 ~ 95% RH, non-condensing
1
Dimensions (Unit: mm)
35 Left Side View
108
72 Front View
Right Side View
Bottom View
Back View
CF
Ordering Information T-316
88.1
108
Top View
Wireless LAN & Wireless Modems
4.5
40.4
Smart WLAN Ethernet Client
T-316
Website: http://www.icpdas.com
E-mail:
[email protected]
5-1-4
Wireless Modems
5
Features
Wireless Solutions
Half-duplex up to 57600 bps Internal Self-Tuner ISM Band 2.4 GHz Supports Full-duplex and Half-duplex communication Spread Spectrum Technology
SST-2450 2450 MHz Wireless Modem
Introduction
Applications
The SST-2450 is a spread spectrum radio modem with an RS-232/RS-485 interface port and is designed for data acquisition and control applications between host and remote sensors. It is also useful for those applications, the cable wire is inconvenient to be installed. The SST-2450 can be used in not only peer to peer mode but also multi-point structure.
PC SST-2450
SST-2450
RS-232
RS-485
RF
XP-8041
1
SST-2450
M-7000
I-7000 RS-485
RS-485 Remote I/O Modules
Wireless LAN & Wireless Modems
CF
iP-8441
RS-485
RU-87P4 RS-485
Remote I/O Units
Specifications Wireless Operating Frequency Range Channel Spacing Output Power Transmit Power Modulation Radio Technique Duplex Mode Number of Channel Number of PN Code PN Code Rate Transmission Range Data Bit Error Rate Antenna Type Connector Serial Link Interface
SST-2450
Max. Data Transfer Rate in Asynchronous Mode Max. Data Transfer Rate in Synchronous Mode Data Format Power Operating Voltage Current Consumption
2.4 GHz (2410.496 MHz ~ 2471.936 MHz) 4.096 MHz 0.05 W 17 dBm +/-2 dBm MSKG Direct Sequence Spread Spectrum TDD (for Full-duplex) 16 16 1.365 Mchips/Sec. Typical 300 m < 1/1000 @ -102 dBm 3 dBi Omni-directional, bendable Reverse-Polarity SMA-Jack RS-232 RS-485 Full-duplex Mode Half-duplex Mode Full-duplex Mode Half-duplex Mode
Typical Transmission Receive
Mechanical Dimensions (W x H x D) Environment Operating Temperature Storage Temperature Humidity
5-1-5
SST-2450
ICP DAS CO., LTD
TxD, RxD, GND D+, D-; internal self-tuner ASIC; Non-isolated 9600 bps 28800 bps 19200 bps 57600 bps N, 8, 1 or E, 8, 1 +10 VDC ~ +30 VDC Less than 250 mA 2W 1W 72 mm x 117 mm x 35 mm -10 °C ~ +50 °C -20 °C ~ +70 °C 0 ~ 90% RH, non-condensing
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Pin Assignments
3-wire RS-232 Wiring RS-232 Master
N/A
RL0 NO
RL0 COM
RL1 NO
RL1 COM
RL2 NO
RL2 COM
10 N/A
RL3 NO
RL3 COM
RL4 NO
RL4 COM
TxD
RL5 NO
05
23 RL5 COM
RxD
PWR
(R)+Vs
10
(B)GND
01
(B)GND
(G)DATA-
09
(R)Vs+
08
IN.COM
(Y)DATA+ IN2
GND
07
IN1
06
9
SST-2450 SST-900
IN0
Twisted Pair Wiring plus Ground
--
04
1
2-wire Only Device
GND
03
E1
DATA+(B) DATA-(A) GND
SET
02
5
Antenna
IN4
01
Pin Assignment
IN3
Terminal No.
GND
DATA-(A)
Device 3 DATA+(B)
GND
DATA-(A)
DATA+(B)
GND
DATA-(A)
DATA+(B)
Device 2
Wireless Solutions
RS-485 Master
Device 1
IN5
Wiring 2-wire RS-485 Wiring
10
RS-232 Device
TxD RxD GND
RxD TxD GND
Dimensions (Unit: mm) 35
31.5
1 56.0
Top View
2-SCREW M3
56.0
35 72.0
72.0 Front View
Back View
Bottom View
39.5 Din-Rail Mounting Bracket
CF
Ordering Information 2450 MHz Wireless Modem
Accessories ANT-8 ANT-15
1 km, 2.4 GHz External Antenna (Omni-directional). Gain: 8 dBi
ANT-18
9 km, 2.4 GHz External Antenna (Directional). Gain: 18 dBi
ANT-15YG ANT-21
5 km, 2.4 GHz External Antenna (Directional). Gain: 15 dBi
ANF-2401
1 W Amplifier
SST-2450
SST-2450
Side View
Wireless LAN & Wireless Modems
117
5 km, 2.4 GHz External Antenna (Omni-directional). Gain: 15 dBi
12 km, 2.4 GHz External Antenna (Directional). Gain: 21 dBi
Website: http://www.icpdas.com
E-mail:
[email protected]
5-1-6
Wireless Modems
5
Features
Wireless Solutions
Half-duplex up to 115200 bps Internal Self-Tuner ISM Band 900 MHz
SST-900 900 MHz Wireless Modem
Introduction
Applications
The SST-900 is a radio frequency modem with an RS-232/RS-485 interface port and is designed for data acquisition and control applications between a host and remote sensors. It is also useful for those applications where the installation of cable wire is inconvenient. The SST-900 can be used not only in peer-to-peer mode but also in a multi-point structure.
PC SST-900
SST-900
RS-232
RS-485
RF
XP-8041
1
SST-900
M-7000
I-7000 RS-485
RS-485 Remote I/O Modules
Wireless LAN & Wireless Modems
iP-8441
RS-485
RU-87P4 RS-485
Remote I/O Units
Specifications Wireless Operating Frequency Range Channel Spacing
915 MHz (902 MHz ~ 928 MHz)
Transmit Power
15 dBm
Number of Channel Transmission Range
16
Data Bit Error Rate
< 1/1000 @ -102 dBm
1.5 MHz
Typical 300 m
Antenna Type
3 dBi Omni-directional, bendable
Connector
CF
SST-900
Reverse-Polarity SMA-Jack
Serial Link RS-232
Interface
RS-485
TxD, RxD, GND D+, D-; internal self-tuner ASIC; Non-isolated
SST-900
Max. Data Transfer Rate (Half-duplex Mode)
115200 bps
Data Format
N, 8, 1 or E, 8, 1
Power +10 VDC ~ +30 VDC
Operating Voltage Mechanical Dimensions (W x H x D)
72 mm x 117 mm x 35 mm
Environment
5-1-7
Operating Temperature
-10 °C ~ +50 °C
Storage Temperature
-20 °C ~ +70 °C
Humidity
0 ~ 90% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Pin Assignments
3-wire RS-232 Wiring RS-232 Master
N/A
RL0 NO
RL0 COM
RL1 NO
RL1 COM
RL2 NO
RL2 COM
10 N/A
RL3 NO
RL3 COM
RL4 NO
RL4 COM
TxD
RL5 NO
05
23 RL5 COM
RxD
PWR
(R)+Vs
10
(B)GND
01
(B)GND
(G)DATA-
09
(R)Vs+
08
IN.COM
(Y)DATA+ IN2
GND
07
IN1
06
9
SST-2450 SST-900
IN0
Twisted Pair Wiring plus Ground
--
04
1
2-wire Only Device
GND
03
E1
DATA+(B) DATA-(A) GND
SET
02
5
Antenna
IN4
01
Pin Assignment
IN3
Terminal No.
GND
DATA-(A)
Device 3 DATA+(B)
GND
DATA-(A)
DATA+(B)
GND
DATA-(A)
DATA+(B)
Device 2
Wireless Solutions
RS-485 Master
Device 1
IN5
Wiring 2-wire RS-485 Wiring
10
RS-232 Device RxD TxD GND
TxD RxD GND
Dimensions (Unit: mm) 35
31.5
1 56.0
Top View
2-SCREW M3
56.0
35 72.0
72.0 Front View
Back View
Bottom View
39.5 Din-Rail Mounting Bracket
CF
Ordering Information 900 MHz Wireless Modem
Accessories ANT-8 ANT-15
1 km, 2.4 GHz External Antenna (Omnidirectional). Gain: 8 dBi
ANT-18
9 km, 2.4 GHz External Antenna (Directional). Gain: 18 dBi
ANT-15YG ANT-21
5 km, 2.4 GHz External Antenna (Directional). Gain: 15 dBi
ANF-2401
1 W Amplifier
SST-900
SST-900
Side View
Wireless LAN & Wireless Modems
117
5 km, 2.4 GHz External Antenna (Omnidirectional). Gain: 15 dBi
12 km, 2.4 GHz External Antenna (Directional). Gain: 21 dBi
Website: http://www.icpdas.com
E-mail:
[email protected]
5-1-8
