Transcript
HDMI Over COAX Extender HCX-1100 Quick Reference Guide
009-0307-01
The Savant HDMI Over COAX Extender (HCX-1100) Quick Reference Guide provides the steps necessary to install the HCX-1100.
Features •
The Savant HDMI™ over COAX (RGBHV) digital extension solution set takes an HDMI™ signal and extends its distance over 5-connector coaxial cabling.
•
HDMI™ over COAX is capable of delivering 1080p HDMI™ at extended distances of up to 330 feet (100 meters).
•
Supports both audio and video signals for large HD displays.
•
Connects and extends HDMI™ source signals to remote HDMI™ displays over RGBHV.
•
HDMI™ 1.3 and HDCP compliant
•
Supports mandatory HDMI™ 1.4 3D resolutions
•
Both audio and video signals are transmitted digitally over mini-COAX cables.
Unpack the Components To unpack and mount the Transmitter and Receiver, refer to the diagram below for connection information and do the following: 1. Open the box and remove the packing. 2. Remove the supplied items from the box (see Box Contents below).
Box Contents • • • •
(1) Extender for HDMI Over COAX with Transmitter Unit (1) Extender for HDMI Over COAX with Receiver Unit (1) 9V DC Power Supply (1) Quick Reference Guide
Mount the Components To mount the HDMI™ over COAX Transmitter and Receiver, do the following: 1. Place the components in locations that provide adequate access to the connectors in order to route the power cables and other required signal and control cables. Note: All components requiring 120 VAC, 50/60 Hz source power must obtain it from a surge-protected circuit. 2. Interconnect the components as described in Interconnecting the Units below and shown in the interconnection diagram.
Specifications - Transmitter and Receiver Temperature
32° to 95° F (0° to 35° C)
Humidity
10% to 90% RH (non-condensing)
Height Width
1.20 in/3.0 cm 3.3 in/8.4 cm
Depth Weight
3.5 in/8.9 cm 0.8 lb/0.36 kg (weight of each unit)
9V DC Input Power
120 VAC, 50/60 Hz to 9V DC Power Supply (Transmitter); 9V DC is output from Transmitter to PWR connector on Receiver 6 Watts (max) per unit 1080p CSA NRTL/C and FCC Part 15 Class B Compliant
Power Consumption Max. Video Resolution Supported Safety and Emissions RoHS
Receiver Connectors R G B CLK PWR HDMI Out (Type A 19 pin female) Indicator Power LED LINK ON (4 LEDs) LINK OFF (4 LEDs)
These BNC connectors receive the HDMI signal from the Transmitter over mini-COAX cables. This BNC connector inputs 9V DC from the Transmitter over COAX a mini-COAX cable. Outputs HDMI signal to audio and video components
• Blue indicates the Receiver is receiving 9V DC power. • Off indicates the Receiver is not receiving 9V DC power. • Green indicates a valid link exists between the Transmitter and Receiver over the COAX cabling for the respective R, G, B, and CLK signals. • Red indicates a valid link does not exist between the transmitter and receiver over the COAX cabling for the respective R, G, B, and CLK signals.
Transmitter Connectors DC 9V HDMI In (Type A 19 pin female) R G B CLK PWR Indicator DC 9V LED
Receives 9V DC@ 1A input power to Transmitter Provides HDMI signal input to Transmitter These BNC connectors output the HDMI signal to the Receiver over COAX cabling. This BNC connector outputs 9V DC to the Receiver over COAX cabling. • Blue indicates the transmitter is receiving 9V DC power. • Off indicates the transmitter is not receiving 9V DC power.
Interconnect the Units To interconnect the units, do the following: 1. Connect the Transmitter to the HDMI source device such as a router or switch using a HDMI cable. 2. Connect the Receiver to an audio/video device such as a HD Display, DVD, DVR, etc., using a HDMI cable. 3. Interconnect the R, G, B, and CLK BNC connectors on Transmitter and Receiver. These connections route the HDMI signal from the Transmitter to the Receiver. The Transmitter and Receiver units may be up to 330 feet apart. 4. Interconnect the PWR BNC connectors on Transmitter and Receiver. These connections route the 9V DC input power from the Transmitter to the Receiver. 5. Apply power to all connected units. Plug the AC power adapter between a surgeprotected power strip and the DC 9V input connector on the Transmitter.
Copyright © 2011 Savant Systems LLC. SAVANT® and RacePoint Blueprint™ are trademarks of Savant Systems LLC. Savant LLC reserves the right to change product specifications without notice. 770 Main Street, Osterville, MA 02655, Phone 508.683.2500, Fax 508.683.2600, http://www.savantav.com
HDMI Over COAX Extender HCX-1100 Quick Reference Guide
Additional Documentation Additional documentation for the HCX-1100 is available at: http://www.savantav.com > Dealer Login > Knowledge Base > Products. • Refer to the HDMI Over COAX Extender (HCX-1100) Installation Guide for additional information. • Refer to the RacePoint Blueprint™ Programming Guide on how to configure the HCX-1100 into a Savant System.
HDMI over COAX Cable (BNC) and Connector Information SAVANT® recommends using the approved RGBHV Mini 23 Solid AWG Cable (Belden) for interconnecting and wiring the HDMI™ over COAX Extender. In addition, SAVANT® recommends using the specified BNC COAX terminations, and the stripping and crimping tools as specified by the cable provider. Refer to the following HDMI over COAX cable recommendations: • • • •
Cable: Belden 7789A for 1080p content distribution (maximum length 300 ft.) BNC connector: Amphenol 31-71033 (Type 2 - 75Ω) Crimper: Amphenol CTL-2 Stripper: Paladin Tools1258
To locate the connector assembly instructions go to: http://www.amphenol.com/
Copyright © 2011 Savant Systems LLC. SAVANT® and RacePoint Blueprint™ are trademarks of Savant Systems LLC. Savant LLC reserves the right to change product specifications without notice. 770 Main Street, Osterville, MA 02655, Phone 508.683.2500, Fax 508.683.2600, http://www.savantav.com
009-0307-01
