Preview only show first 10 pages with watermark. For full document please download

009-0448-00 Hrx-f001 Tech Spec

   EMBED


Share

Transcript

HDMI Fiber Receiver: HRX-F001 Description The HRX-F001 is an HDMI™ over Fiber Receiver interface providing a single HDMI output for a single display device. Its design allows the HRX-F001 to be installed behind a flat panel display or above a ceiling mounted projector. It connects to a VOM-F004 using a single OM3 multimode fiber strand with an SC Type connector. The HRX-F001 is ideal for use at any remote location in a residence, boardroom, classroom or video walls, providing an HDMI output for an HD Display, projector or similar device. A single HDMI digital AV output port is provided with the HRX-F001, supporting 1080p60 HDTV and WUXGA computer signals with HDCP, Deep Color, 3D, and multi-channel HD lossless audio. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable. A single fiber strand connects the HRX-F001 to any Savant SmartMediaPro modular matrix switcher and controller configured with an HDMI over Fiber Output service module (VOM-F004, sold separately), transporting video and audio signals all through one simple SC type optical connection. Multiple HRX-F001 receivers may be installed to handle multiple displays in a multi-room distribution system, all fed from a central SmartMediaPro series platform. The HRX-F001 LED indicators are provided for easy setup and troubleshooting, verifying the status of connections and signal activity at a glance. 009-0448-00 Feature Summary • Single-port HDMI over Fiber Receiver • Low-profile design for ease of installation • Supports up to 1000 ft (300 m) OM3 multimode fiber runs • Handles HD video with Deep Color, 3D and HDCP • Handles multichannel PCM and high-bitrate HD audio formats • Single-fiber connection to SmartMediaPro platforms The Savant fiber solutions use a single strand of fiber optic cable per connection. Savant recommends that at minimum two fiber strands are run and available for redundancy and expansion. The HRX-F001 paired with the VOM-F004 module enables wiring distances up to 1000 feet (300m) using OM3 multi-mode fiber. See the technical specifications for the VOM-F004. HRX-F001 extends HDMI features at 1080p60 full HD with Deep Color, multichannel audio, and other optional HDMI features including 3D. HRX-F001 includes a locking HDMI connector for added reliability. The Savant fiber solutions have been tested using OM3 SC-SC MM 50/125 fiber optic cable (OM3) further explained as follows: • • • • OM3 is the fiber classification SC is the Style Connector MM refers to multi-mode fiber 50/125 is the core and cladding diameters in microns Front (left) and Rear Views of HRX-F001 030112 1 of 4 HDMI Fiber Receiver: HRX-F001 Dimensions 009-0448-00 The next figures show the dimensions of the HRX-F001. Screw Channel The screw channel shown in the next figure on the sides of the unit is used for mounting brackets on the HRX-F001. 030112 2 of 4 HDMI Fiber Receiver: HRX-F001 Specifications 009-0448-00 Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 5% to 95% RH (non-condensing) Maximum BTU 9 BTUs per hour Dimensions  and  Weight Height 1.3 in/3.3 cm Width 3.0 in/7.6 cm Depth 3.1 in/7.86 cm Weight Approximately 0.5 lb (0.23 kg) Power Input Power 5 V DC power pack, barrel connector, 100-240V AC, 50/60 Hz Nominal Input Power 2 W for 120V AC, 60Hz (North America) Maximum Input Power 2.5 W for 120V AC, 60Hz (North America) Compliance Safety and Emissions FCC Part 15 CE Mark C-Tick RoHS Compliant Connectors SC Fiber Input Digital audio / video input (1) HDMI Output 19-pin Type HDMI female; DVI Output requires adapter (not included) (1) Digital Audio Input TosLink connector reserved for future use Supported Video Output Formats NOTE    Output  format  is  determined  by  the  video  output.  The  HRX-­‐F001  does  not  change  video  formats. HDMI Compliant HDCP 1.3 High-bandwidth Digital Content Protection (HDCP)— Supports encryption and decryption of audio and video content. 480i, 480p, 576i, 576p, 720p, 1080i, 1080p at 50/60 Hz, 1080p at 24Hz 640 x 480, 800 x 600, 1024 x768, 1280 x 1040, 1280 x 960, 1920 x 1080, 1920 x 1200—all at 60 Hz 3D Formats Supported 1080p at 24 Hz Frame Packed/Top and bottom 720p at 50/60 Hz Frame Packed/Top and bottom 1080i at 50/60 Hz Side by Side Supported Audio Output Formats Supports Dolby TrueHD™ and DTS-HD® Master formats, PCM, Dolby and DTS digital audio transmission. 030112 3 of 4 HDMI Fiber Receiver: HRX-F001 Included Items 009-0448-00 The items included in the installation kit (075-0102-00) for the HRX-F001 are outlined in the next table. Description Quantity Wall Mount Universal Power Pack, 5V DC 2.5 Amps with US, EU, UK, and SAA power clips 1 Phillips Flat Screws #6 X 1/4 4 Mounting Brackets 2 Quick Reference Guide 1 Optional Accessories The optional accessories available for use with the HRX-F001 are outlined in the next table. Description Model Number Three-foot HDMI™ cable equipped with locking connectors. CBL-3LHDMI Six-foot HDMI™ cable equipped with locking connectors. CBL-6LHDMI Copyright © 2012 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC. All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice. 030112 4 of 4