Transcript
Savant Circa Keypad
Description The Savant Circa Keypad offers a bold look, as well as the added bonus of easy installation and programming. As with all Savant keypads, the Circa is available in a wide variety of button configurations, engraving options, and faceplate finishes. The Savant Circa Keypad has thirteen field-selectable LED Colors. By rotating the LED Color Wheel on the keypad, LED colors can be selected. The LED Level Wheel, located adjacent to the LED Color Wheel, can be rotated to adjust LED brightness. The Savant Circa Keypad has unique backlighting that illuminates the engraving text for easier reading both day and night hours. The backlighting is adjustable so it can be as bright or dim as desired. Custom engraved buttons are available with up to two lines of text with five characters each line. Multiple languages and icon engraving (custom symbols) are available also. A back-box cover allows for the protection of electronic components from dust and damage that can occur during installation in the midst of construction.
009-0563-00
Feature Summary • Column style mounting: -‐ Single gang button configurations of 1, 3 or 6 buttons. -‐ Double gang configurations with 12 buttons. • Wide style: single gang button configurations of 1, 3 or 6 buttons • Square mounting: 2, 4, or 8 buttons • 13 field-adjustable LED colors • Custom engraved buttons: multiple languages
New Circa Keypad Style
• Standard faceplate colors: white, black, almond, or prime coat
Mounting Options: • Premium faceplate colors: -‐ Polished Chrome -‐ Satin Nickel -‐ Dark Bronze
3 Button Colors:
Black, White, Almond - Glo
3 Standard Facepla
Black, White, & Almond - G in Primer Co
• Use RacePoint Blueprint™ design toolAlso to Available configure and customize Savant Circa Keypad
3 Premium Facepla
Configurations:
Circa Keypad Configurations 2
1 2
1 3
2
1
1 2
1 2
1 2
2
3 4
3 4
3 4
3
5 6
5 6
5 6
1 3
2 4
1
2
3
2 4
1 3
2 4
2 1
4 3
6 5
Satin Nickel, Polished Chro Rubbed Bronze
Backlit Buttons Buttons: Backlit Custom Custom engraved Twoengraved 2 lines o lines of text with line or choose from a fiveeach characters each line. 13 Field Changeab Or, choose from a variety of icons (see page 5). —
Front of Savant Circa Keypad with blue LEDs
050912
1 of 5
Savant Circa Keypad
Dimensions
009-0563-00
The next figures show the dimensions of a single gang, column-mounted Savant Circa Keypad without faceplate.
Rear View
Front View
Side View
Specifications Environmental Operating Temperature
32° to 104° F (0° to 40° C)
Humidity
10 to 90 percent non-condensing
Power Supply Requirement
20-24V DC
Supply Current
10 mA (no LEDs lit) Backlit Keypad: 100 mA nominal
Wiring to Savant Keypad Link
Cumulative maximum of 1000 feet (304.8 m) at 16 American Wire Gauge (AWG) 18 AWG at 330 feet (cumulative)
Dimensions
Column Mounting Style
Wide Mounting Style
Square Mounting Style
Height without faceplate
4.51 in (11.45 cm)
2.83 in (7.19 cm)
3.18 (8.08 cm)
Width without faceplate
2.83 in (7.19 cm)
4.51 in (11.45 cm)
3.27 in (8.80 cm)
Depth without faceplate
.84 in (2.12 cm)
.84 in (2.12 cm)
.84 in (2.12 cm)
Compliance Safety and Emissions
FCC Part 15 CE Mark
RoHS
Compliant
Color Options Seven-digit suffix code indicate the combination of number of buttons, faceplate finish, and button colors. See next page.
Standard Faceplate Finishes
white, black, almond, or prime coat
Premium Faceplate Finishes
polished chrome, satin nickel, and dark bronze
Custom Faceplate Finishes
Contact the sales department for details on custom faceplate finishes.
Button Colors
white, black, or almond
050912
2 of 5
Savant Circa Keypad
Included Items
009-0563-00
The items included with the Savant Circa Keypad are outlined in the next table. Note that the Savant faceplates are sold separately.
Description
Quantity
Keypad with buttons 6-32 x 1 Flat Phillips Screws Keypad pigtail cable Quick Reference Guide
1 2 (Single Gang) | 4 (Double Gang) 1 (Single Gang) | 2 (Double Gang) 1
Required System Components
The system components required for use with the Savant Circa Keypad are outlined in the next table.
Description
Model Number
Host Controller
HST-4001, HST-4002 or SVR-4100
Ethernet Network
Enterprise-grade network deployment
Keypad Link SKL-1000 Splice Savant the 3-pin connectors (shipped with control stations) to the 3-wire control station homeruns at each control station location as shown. As required: 100 ft/30.48 meters — CBL-4100 250 ft/76.20 meters — CBL-4250 500 ft/152.40 meters — CBL-4500 1000 ft/304.8 meters — CBL-41000
Cabling
Hidden Text in this image: Savant Faceplate
NOTE Voltage readings at this end CCU end. Savant Controller
Customized to color and style of customer requirements should typically read 1 or 2 volts less A minimum of SmartControl 7. RS-232 port must be allocated for connecting to SKL-1000.
than at the
Savant Keypad Link Wiring Design Considerations To connect the keypads to the SKL-1000, the wires from the 3-pin connectors must be spliced with the 3-wire cable running to the keypad backboxes. The next figure shows the use of 16 gauge (AWG) wire, but in shorter installations (up to 330 feet) 18 gauge wire can be used. Crimp connectors or wire nuts can be used to terminate the stranded wire. Crimp connectors are preferred. Savant Keypad Link wire
Backbox Size
wire nuts.
Keypad Backbox
Keypad backboxes should have a minimum inside dimension of 3 in. high x 1⅞ in. wide x 1½ in deep. Use a square-cornered backbox to best accommodate these dimensions. Do not use plastic rings with keypads, will not Keypadrounded Backboxcorners—keypads, especially Keypad multiple-gang Backbox fit. Single-gang, metal cut-in boxes, plaster, or tile rings are not acceptable. In new construction installations, for example, a single gang backbox, model P-241 (supplied by Allied Moulded Products) would accommodate a Savant keypad. An example of a double gang backbox is model P-442 (supplied by Allied Moulded Products). Whether installing backboxes in new construction or “old work” installations, the installer should test fit the keypad to the backbox before installing the backbox in a wall.
050912
3 of 5
Savant Circa Keypad
Keypad Model Number Scheme: KAB-CCDE
009-0563-00
The model numbers for Savant keypads use the following scheme. For example, a Circa keypad with a column-mounting style, and six white buttons would have a model number of KCC-06WX-00.
Letter Code
Type
Code Definition
K
Hardware Code
K - Keypad
A
Keypad Style
M - Metropolitan C - Circa E - Echo
B
Mounting Style
CC
Number of Buttons
D
Button Color
E
Future Use
C - Column S - Square W - Wide 01, 03 or 06 Single Gang or Wide 01-12 Double Gang 02, 04 or 08 Square W - White B - Black A - Almond
Faceplate Model Number Scheme: FABC-DDEF The model numbers for Savant keypad faceplates use the following scheme. For example, a white metal faceplate for a Circa keypad with a single gang, column-mounting style, and six buttons would have a model number of FC1C-06WM-00.
Letter Code
Type
Code Definition
F
Hardware Code
F - Faceplate
A
Keypad Style
M - Metropolitan C - Circa E - Echo
B
Number of Gangs
1 - Single Gang Column 2 - Double Gang
Faceplate Model Number Scheme C - Column
C
Mounting Style
DD
Number of Buttons
S - Square W - Wide
F A B C - DD E F F A
B
E
Faceplate Finish
C
DD
F
Faceplate Material
E
F
050912
Faceplate Colors
01, 03 or 06 Hardware Single Wide CodeGang or F - Keypad M - Metropolitan 01-12 Double Gang C - Circa Keypad Style 02, 04 or 08 Square E - Echo 1 - Single Gang Column Number of GangsW - White 2 - Dual Gang W - White B - Black C - Column B - Black S - Square Mounting Style A - Almond W - Wide A - Almond P - Primer 1 - 9 - Single Gang P - Primer Coat Button Positions Coat 8 - 18 - Double Gang M - Metal Faceplate Finish P - Plastic (Echo only) Faceplate Material
B - Black O - Oil Rubbed Bronze W - White N - Satin Nickel A - Almond C - Polished Chrome P - Primer Coat M - Metal P - Plastic (Echo Only)
4 of 5
Savant Circa Keypad
Keypad Button Icon Options
009-0563-00
The Circa keypad is designed to use custom engraved buttons that are available with up to two lines of text. As well, all buttons are backlit which can be adjusted. Multiple languages and icon engraving (custom symbols) are available also.The following shows some examples of customized buttons.
Options:
3 Button Colors: Black, White, Almond - Gloss Finish
3 Standard Faceplate Finishes: Black, White, & Almond - Gloss Finish Also Available in Primer Coat for in-field Finishing
3 Premium Faceplate Finishes:
ations: 2
1 2
1 2
4
3 4
3 4
6
5 6
5 6
2 4
1 3
Satin Nickel, Polished Chrome, & Dark Oil Rubbed Bronze
Backlit Buttons: Custom engraved 2 lines of text with 6 characters
Field-Changeable LED Colors each line or choose from a variety of icons
Savant Systems offers 13 LED colors—including white—for its Circa keypad as follows:
2 4
13 Field Changeable LED Colors:
2 1
4 3
6 5
The colors of the LEDs can be changed in the field by rotating the LED Color Wheel. The brightness intensity level of the LEDs can also be adjusted and the Night Light Mode activated in the field by rotating the LED Intensity Level Wheel.
Copyright © 2012 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC. All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice.
050912
5 of 5
