Transcript
Ethernet Cables
Category 5e/6 UTP Solid Cables Applications 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE 802.3) 100VG-AnyLAN (IEEE 802.12) 550 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps ATM Power over Ethernet (POE)
D-Link Category 5e and Category 6 solid cables are the best twisted-pair cables in the market for transmitting data over local area networks (LANs). These CAT5e/CAT6 cables exceed performance requirements specified by the TIA/EIA-568B.2 and IEC 60603-7-4 standards (Category 5e Class D). The Cat 5e/6 cables are made using 4 Unshielded Twisted Pairs (UTP) of 100 ohm impedance and are protected by a plastic outer jacket.
Applications As streaming video and multimedia over LAN are gaining popularity, users demand faster data transmission and reduced waiting time. D-Link Category 5e/6 cables are ideal for simple, costeffective and high-speed transmission performance. They support a higher signal-to-noise ratio, providing better reliability for current applications and higher data rates for future applications.
Category 5e Cable The Category 5e cable, an enhanced version of Category 5, adheres to more stringent standards specified by TIA/EIA-568B.2 and IEC 60603-7-4. These cables are made using 24 gauge (AWG) copper wires with about three twists per inch enabling them to transmit data at 1000 Mbps (~1 Gigabit per second) with a frequency of 100 MHz. The CAT5e cables are suitable for 10BASE-T, 100BASE-TX Fast Ethernet and 1000BASE-T Gigabit Ethernet.
CAT5e and CAT6 cables are suitable for applications such as basic voice services, token ring, PoE and ATM (at up to 155 Mbit/s, over short distances). The CAT6 cables meet several key criteria for efficient and effective high-speed networks for 1 Gigabit Ethernet. With 1 Gigabit backbones installed, companies can provide 1 Gigabit Ethernet service to workstations in order to support applications such as streaming video, medical imaging and centralized applications.
Category 6 Cable The Category 6 cable is backward compatible with Category 5/5e and Category 3 specifications. Compared to its predecessors, CAT6 cables reduce crosstalk and system noise. The superior insulation around the 23 gauge (AWG) copper wires attribute to the increased performance. The CAT6 cables can transmit data at 1000 Mbps (~1 Gigabit per second) with a frequency of 250 MHz. The CAT6 cables are suitable for 10BASE-T, 100BASE-TX Fast Ethernet and 1000BASE-T / 1000BASE-TX (Gigabit Ethernet).
CAT5e/6 Solid Cables
01
Ethernet Cables
CAT5e
CAT5e Cable
CAT5e Modular Connector
CAT5e Patch Cord
CAT6
CAT6 Cable
CAT6 Modular Connector
CAT6 Patch Cord
02
Ethernet Cables Specifications Cable
CAT5e (Patch Cord) Conductor SKU Description
CAT5e ( Solid Cable) 24 AWG, Multi-cores (Solid)
24 AWG, Stranded
23 AWG, Multi-cores (Solid)
NCB-5EUBLUR1-1, NCB5EUBLUR1-2, NCB-5EUBLUR1-3
NCB-5EUBLUR-305
NCB-C6UGRYR1-1, NCBC6UGRYR1-2, NCB-C6UGRYR1-3
NCB-C6UGRYR-305
Bare Copper Blue/285C
Blue/288C
Jacket Hardness Length Type
Cool Gray/10C
1m/2m/3m
305 m +2 m
1m/2m/3m
305 m + 2 m
o
60 C min (temperature limited)
Flame Property
VW-1 (UL); FT-1 (CSA)
Contact Blade Temperature Range Dielectric Withstanding Voltage Insulation Resistance Durability
Certifications
Cool Gray/5C 55P (84A ± 3A, Shore)
Heat Resistance
Connector Modular Connector/ Plug Contacts
RJ-45 8P Gold plated: 30U” Phosphor Bronze -10 ~ 80 oC 500 V AC 35M ohm (max.) 750 matching cycles
Cable-to-Plug Tensile Strength
20 lbs (89N) (min.)
UL Applications
250 V AC, 2A (max.)
UL Listed, ETL Verified, RoHS Compliant
CAT6 ( Solid Cable)
24 AWG, Stranded
Conductor Metal Color Code
CAT6 (Patch Cord)
√
D-Link Corporation No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2010 D-Link Corporation. All rights reserved. Release 01 (May 2010)
03
