Transcript
COAXIAL
DS3 Connectors for 735A and 734A DS3 CONNECTORS FOR 735A AND 734A Our new DS3 Mini BNC connector was specifically designed for DS3 central office applications to allow a higher number of connectors/assemblies to be installed in a given area. The new Mini BNC shares the same positive attributes as our popular standard BNC, only in a smaller footprint. There is no need to re-tool as the new Mini-BNC uses exactly the same tool set as our standard BNC plug. Depending on the brand, MilesTek BNC’s are equal to or exceed the quality of other competitors. For example, our BNC plug bodies are machined from brass and then plated with bright nickel. Other inferior brands have cheaper die cast bodies.
The BNC connector body also incorporates a beryllium copper wave washer to allow it to flex during mating and provide uninterruptible continuity of the shield signal. Teflon, the best dielectric, provides the proper 75 ohm impedance and securely hold the captive center pin. The MilesTek BNC center pins are plated with 30 micron inches of gold for maximum contact. Pull strength is very important especially on smaller cables such as 735A. MilesTek BNC plugs have a diamond knurling for maximum cable retention. Having tested thousands of cable assemblies, MilesTek BNC’s recorded a pull test performance of 49.3 inch lbs. on 735A cable.
KEY PART # A B B C D
E F G
DESCRIPTION CABLE TYPE 75 Ω CONNECTORS 10-03003-205 Mini BNC Crimp Plug (New Product) 735A 10-03001-205 BNC Crimp Plug (Most Popular) 735A 10-03001-205-BP BNC Crimp Plug (100 pk) 735A 10-03002-205 Right Angle BNC Crimp Plug 735A 10-03901-205 BNC Crimp Jack 735A 10-03001-204 BNC Crimp Plug 734A 10-03002-204 Right Angle BNC Crimp Plug 734A 75 Ω MINI SMB CONNECTORS 10-33001-205 Mini SMB Crimp Plug 735A 10-33002-205 Right Angle Mini SMB Plug 735A 75 Ω MINI WECO 440A CONNECTORS 10-44001-205 Mini Weco 440A Solder Plug 735A 75 Ω TNC CONNECTORS 10-05001-205 TNC Crimp Plug 735A
Diamond knurled for maximum pull strength
Machined nickel plated body Teflon securely captivates pin
Captive center pin 30 u gold plating
SAMPLES AVAILABLE! Contact MilesTek Today.
Note: *Our 40-50176 is a complete tool kit designed to work with MilesTek DS3 Connectors
800-524-7444
A
10-03003-205
B
10-03001-205
C
10-03002-205
E
10-33001-205
F
10-33002-205
G
10-44001-205
For Expert Customer Service, Call Our Sales Team Today!
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
D
10-03901-205
97
COAXIAL
DS3 Bulk Cable and Tooling
BULK CABLE
A KEY A B C D
B PART # 735A-F 735A6-F 735A12-F 735T2C 735A2 734A 30-60013-WHITE 30-50013-BLUE Quabbin-9720R
C
D
DESCRIPTION (SOLD PER FT.) Coax Cable 75 Ω, 26 AWG Silver Coated Copper Single Strand PVC Coax Cable 75 Ω, 26 AWG Silver Coated Copper Six Strand PVC Coax Cable 75 Ω, 26 AWG Silver Coated Copper Twelve Strand PVC Dual Cable Coax Cable 75 Ω, 26 AWG Silver Coated Copper Dual Strand with Tracer PVC Dual Cable Coax Cable 75 Ω, 26 AWG Silver Coated Copper Dual Strand no Tracer PVC Coax Cable 75 Ω, 20 AWG Bare Copper Single Strand PVC CAT6 Cable 23 AWG 4 pair PVC 1000 ft. CAT5E Cable 24 AWG 4 pair PVC 1000 ft. T1 Cable 22 AWG 100 Ω PVC 1000 ft.
MilesTek stocks a wide variety of bulk cable types. The cable featured above represents the most common used in DS3 Central Office applications. Please contact MilesTek for additional cable types.
Tech Note: Run lengths vary in the central office. The appropriate coax cable needs to be considered so attenuation limits are not exceeded. 734 type cable is usually capable of lengths up to 450 feet, whereas 735 type cable is capable of lengths up to 225 feet.
TOOLING The MilesTek Advantage includes the entire tooling requirement for the correct installation of our connectors. The 40-50176 is a complete tool kit designed to work with MilesTek DS3 connectors. Our kit employs a ½ inch die set that completes the crimp on the sleeve and it also contains a 12 point pin crimp tool for the center pin. Several other tools make up the kit to assist in the installation of our connectors. DS3 TELCO Termination Kit • Crimper with ½" die • 75 Ω pin crimper 12 pt. • Extra stripper cassette • Round cable cutter • Center conductor trimmer • Precision knife • Straight probe • 4 ½" flush cutter • Cable stripper • Case
98
PART # 40-50176
E
F
G
H
I
J
K
L
KEY E F G H I J K L
PART # 40-13204 40-15005 40-11209 40-11210 40-14006 40-40001 40-15001 40-40038
DESCRIPTION Connector Sleeve Crimp Tool 12 point Center Pin Crimp Tool Strip Tool Extra Blade for Strip Tool BNC Removal Tool 8 inch Round Cable Cutter Center Conductor Trimmer 4½” Angled Flush Cutter
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
Stock Orders Shipped Same Day until 5 P.M. C.S.T
COAXIAL
DS3 Cable Assemblies CUSTOM CABLE ASSEMBLIES MilesTek can provide DS3 cable assemblies using many different connector types. Our cable assemblies are built by industry professionals and are 100% tested and guaranteed to perform. We try to keep lead times to 24-48 hours for normal occurrences and offer same day shipping in critical requirements. PART # 201-301-3070-xxx 201-301-6070-xxx 201-302-7070-xxx 201-301-3077-xxx 201-301-6077-xxx 201-301-3078-xxx 201-301-6078-xxx 201-301-3069-xxx 201-301-3080-xxx 201-301-4075-xxx 201-301-4078-xxx 201-301-4070-xxx 201-301-4077-xxx 201-301-4079-xxx 201-301-4080-xxx 201-401-3070-xxx
ASSEMBLY DESCRIPTION BNC Plug to BNC Plug 735A cable BNC Plug to R/A BNC Plug 735A cable BNC Plug to Mini WECO 440A Plug 735A cable BNC Plug to BNC Plug - 6 strand cable 735A BNC Plug to R/A BNC Plug – 6 strand cable 735A BNC Plug to BNC Plug – 12 strand cable 735A BNC Plug to R/A BNC Plug – 12 strand cable 735A BNC Plug to BNC Plug 734A cable BNC Plug to SMB plug 735A cable Mini BNC Plug to BNC Plug 735A cable Mini BNC Plug to Mini BNC Plug – 12 strand cable 735A Mini BNC Plug to Mini BNC 735A Mini BNC Plug to Mini BNC Plug – 6 strand cable 735A Mini BNC Plug to Mini BNC Plug – 2 strand cable 735A BNC Plug to Mini BNC Plug – 2 strand cable 735A BNC Plug to TNC – 2 strand cable 735A
Our in-house design engineering staff has the experience to custom design your cables, revise your current designs to optimize cost effective manufacturing or simply build to your prints. All with shorter lead times than our competition. Our manufacturing facility in Denton, Texas, is staffed by highly-skilled technicians dedicated to producing quality products and delivering them on-time to meet your deadlines.
Replace the xxx with the needed length in inches. Example: TP 1015 36 = 3 ft.
Do you need custom length cable assemblies?
Contact Us Today! 800-524-7444
SINGLE MODE FIBER OPTIC PATCH CORDS
(Custom Lengths Available)
For Expert Customer Service, Call Our Sales Team Today!
MilesTek offers “off the shelf” fiber optic patch cords. We can also custom build fiber assemblies based on your application. Bulk fiber is available by request. ST/ST DUPLEX
ST/SC DUPLEX
SC/SC DUPLEX
LC/LC DUPLEX
LC/ST DUPLEX
PART # 27-210-001 27-210-002 27-210-003 27-210-005
PART # 27-510-001 27-510-002 27-510-003 27-510-005
PART # 27-310-001 27-310-002 27-310-003 27-310-005
PART # 27-255-001 27-255-002 27-255-003 27-255-005
PART # 27-265-001 27-265-002 27-265-003 27-265-005
SIZE 1M 2M 3M 5M
SIZE 1M 2M 3M 5M
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
SIZE 1M 2M 3M 5M
SIZE 1M 2M 3M 5M
SIZE 1M 2M 3M 5M
99
COAXIAL
DS3 Adapters and Test Kits
DS3 ADAPTERS The BNC Adapters are offered in a 75 Ω version. The 75 Ω type will operate with a digital DS3 signal transmission. Digital signals in the telecommunications industry have necessitated the usage of 75Ω connectors with 75Ω cable. Mismatched adapters cause attenuation of the digital signal resulting in slower rise time of square waves. This distortion of the signal can cause transmission errors. Also, impedance mismatched connections cause reflections of the signal returning to the source known as return loss. Perhaps one mismatched connection will not have a noticeable KEY A B C D E F G H
PART # 10-03538 10-03900 10-03908 10-01002 10-01066 10-03904 10-27023 10-27046
DESCRIPTION BNC Bulkhead Insulated Feed-thru Jack, .505” D hole BNC Jack-Jack Adapter Right Angle BNC Adapter Weco Plug to BNC Jack Adapter Mini Weco Plug to BNC Jack Adapter BNC "T" Adapter Solder Tip Plug Solderless Tip Plug
19” WIDE RACKS
50 70101
A
B
C
D
E
F
G
H
MILESTEK DS3 TRAINING AVAILABLE MilesTek offers racks, panels, and accessories for the central office installer. Our racks and accessories are available in either 19” or 23” widths. Made from either Steel or Aluminum our high quality products and quick turnaround time make MilesTek the perfect choice to complete your project.
MilesTek has been a manufacturer for the DS3 market for over 25 years. We offer superior customer service along with stock of our MilesTek connectors, tooling and accessories. To assist with MilesTek’s DS3 high quality of connectors and customer service; we are proud to introduce our BNC training course.
PART # 50-70101 50-70304 50-70121 50-70120 50-70432 50-99004
We can customize each training session to meet with your company’s application to make certain your installers are provided with the knowledge of cable impedance matching, cable preparation procedures and the ability to choose the proper tools for each job.
DESCRIPTION 19" Aluminum Rack - 2 Post 19" Black Alum Rack - 2 Post 19" Center Mount Shelf - 17.5” Deep 19" Cantilever Shelf - 17.5” Deep 19" 9 Outlet Power Strip 15A 12/24 Screws 100 pack
Note: MilesTek also offers a full line of 23” racks and shelves.
100
effect on system performance, but multiple mismatched connections in the link between the source and destination have a cumulative effect causing possible distortion of the transmitted signal.
Our DS3 BNC connector training course is intended to teach the fundamentals of terminating cable assemblies. The course will outline the features of our BNC design and tooling. It also provides the installer step by step instructions for a dependable installation.
At the completion of the course each installer will be provided training materials and a certificate of completion.
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
Stock Orders Shipped Same Day until 5 P.M. C.S.T
COAXIAL
DS3 Panel Assemblies and Racks BNC BULKHEAD JACKS/PANELS BNC bulkhead isolated jacks are available in 50Ω and 75Ω versions. The 50Ω type is sufficiant for analog video. Although designed for digital video, the 75Ω type will operate with analog video. Panels are made of 16 gauge steel with rolled edges for rigidly and are painted black. They have 0.505” diameter “D” holes to mount bulkhead isolated jacks. Model BSP are without designated strips. Model BDPD have two 0.70” wide designation strips. BNC jacks in the distribution panels are either 10-02538 (50Ω) or 10-03538 (75Ω). Panel widths are 19” or 23” (without designated strips). All panels are 3.5” high except the 1x16 panels, which are 1.75” high. PART # 50-21026 50-21025 50-21029 50-21004 50-21009
DESCRIPTION 19" BSP 1 x 16 - Empty 19" BSP 1 x 16 - 75 Ω Jacks 19" BSPD 1 x 16 - 75 Ω Jacks 19" BSP 2 x 16 - Empty 19" BSP 2 x 16 - 75 Ω Jacks
PART # 50-21012 50-21014 50-21015 50-21017 50-21018
DESCRIPTION 19" BSPD 2 x 16 - Empty 19" BSPD 2 x 16 - 75 Ω Jacks 19" BSP 2 x 12 - Empty 19" BSP 2 x 12 - 75 Ω Jacks 19" BSPD 2 x 12 - Empty
PART # 50-21020 50-25002 50-25001 50-99001 50-99002
DESCRIPTION 19" BSPD 2 x 12 - 75 Ω Jacks 23" BSP 2 x 24 - Empty 23" BSP 2 x 24 - 75 Ω Jacks Panel Screw 10 x 32 x ¾ Panel Screw 10 x 32 x ¾ - 100 Pack
CROSS REFERENCE TABLE MILESTEK PART# 10-03003-205 10-03001-205 10-03001-205-BP 10-03002-205 10-03901-205 10-03003-204 10-03001-204 10-03002-204 10-03901-204 10-03001-217 10-03001-217-BP 10-05001-205 10-33001-205 10-33002-205 10-03205-205 10-03204-205 10-03204-204 10-44001-205 10-03538 10 03900 10-03908 10-03904 10-01002 10-01066
DESCRIPTION Mini BNC Plug BNC Plug BNC Plug-100 pk. Right Angle BNC Plug BNC Jack Mini BNC Plug BNC Plug Right Angle BNC Plug BNC jack BNC Plug BNC Plug-100 pk. TNC Plug Mini SMB Plug Right Angle Mini SMB Type Splice connector 735/735 Splice connector 734/735 Splice connector 734/734 Mini Weco 440A Plug BNC Bulkhead Jack-Jack Insulated BNC Jack-Jack Adapter Right Angle BNC Jack-Plug Adapter BNC "T" Adapter WECO Plug to BNC Jack Adapter Mini WECO 440A to BNC Jack Adapter
For Expert Customer Service, Call Our Sales Team Today!
CABLE TYPE 735 735 735 735 735 734 734 734 734 YR23023 YR23023 735 735 735 735 734/735 734 735 — — — — — —
TROMPETER PART# UPL250-026 UPL220-026 UPL220-026/T50 UPLR220-026 UCJ220-026 UPL250-025 UPL220-025 UPLR220-025 UCJ220-025 UPL220-009 UPL220-009 UPL240-026 — — UCCS-026-026 UCCS-025-026 UCCS-025-025 PL11C-026 UBJ28 UAD28 UADRMF220 UBN23 AD1W ADMW12
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
ADC PART# — BNC-3-N BNC-3B-N BNC-RA-3 — — BNC-1-N BNC-RA-1 — BNC-7 BNC-7B — — — — — — — BHFT1 BNC-STRT-ADPT BNC-RA-ADP — — —
KINGS PART# — 2025-44-9 — 2026-17-9 — — 2025-76-9 2026-16-9 — — — — — — 3050-11-9 3050-10-9 3050-12-9 7410-9 2029-9-9 2029-15-9 2029-20-9 2029-16-9 — —
101
COAXIAL
BNC Connectors & Adapters
BNC Crimp Plugs, 75 Ohm - Broadcast Digital Video (1) (2) (4)
50 Ω vs. 75 Ω BNC
High frequency HDTV serial digital video. Three piece crimp plug with captive center contact. PART # CABLE TYPE 10-03001-240 RG59 20AWG, 1505A, 30 01003, 30 01004, 30 01005, 30 01006 10-03001-217 8218/VFM809, 1855A, 1856A 10-03001-215 RG179, 1520A, 1522A 10-03001-237 30 01031, 1694A, 1695A 10-03001-203 8281 10-03001-202 8241, RG59 23 AWG
CRIMP SLEEVE Hex 0.255
PRICE $2.17
Hex 0.178 Hex 0.178 Hex 0.324 Hex 0.324 Hex 0.255
$2.17 $2.17 $2.17 $2.17 $2.17
BNC Crimp Plugs, 75 Ohm Bulkpacks PART # CABLE TYPE 10-03001-240-BP RG59 20AWG, 1505A, 30 01003, 30 01004, 30 01005, 30 01006 10-03001-217-BP 8218/VFM809, 1855A, 1856A
PRICE $210.00 $210.00
Traditional 50 Ω BNC connectors that are installed on 75Ω coaxial video cable cause digital signal distortion which results in digital transmission errors. The mechanical differences between the two types of connectors are the dielectric insulators and center pins. The 75Ω connector employs Teflon as a dielectric and air around its outer spring fingers as compared to Delrin surrounding the spring fingers of the 50Ω type. Also the 75Ω connector's center pin has the same diameter in the front and rear areas where the pin is crimped to the cable's center conductor; the 50Ω connector's pin has a larger diameter in the crimp area. Therefore, different crimp tools are required for two types of center pins. However, both types on connectors mate mechanically without physical damage. Nevertheless, the 50Ω connector is adequate for analog video applications.
BNC Adapters BNC Adapters are offered in 50 Ω and 75 Ω versions. The 50 Ω type is sufficient for analog video. Although designed for digital video, the 75 Ω type will also operate with analog video.
Bulk Pack contains 100 Bodies, 102 Sleeves and 105 Pins
A
B
C
D
BNC Crimp Plugs, 50 Ohm - Analog Video, Ethernet (2) (3) (4) Traditional NTSC Baseband Analog Video
PART # 10-02001-202 10-02001-203 10-02001-233 10-02001-201 10-02001-220
CABLE TYPE RG59/U (solid) 23 AWG 8241 8281 RG58A, A/U, RG 223, 9907 RG58/U (solid), 8240 RG58 A/U 89907
CRIMP SLEEVE Hex 0.255 Hex 0.324 Hex 0.213 Hex 0.213 Hex 0.213
PRICE $2.17 $2.17 $2.17 $2.17 $2.17
MILESTEK BNC ELECTRICAL SPECIFICATIONS: • Frequency Range: Tested to 3 GHz • Working Voltage: 500 VRMS • Dielectric Withstanding Voltage: 1500 VRMS • VSWR: 1.05 + 0.1f (GHz) DC to 1 GHz • Contact Resistance: Center Contact 1.5 milliohms, Outer Contact 1.0 milliohms • Insulation Resistance: 5000 megohms (min.) Tek Note: BNC Plugs (1) Use center pin crimper 40-15002 for all Milestek 75 Ω BNC plugs. (2) Use 40-11209 Corex Cable Stripper for specified cable types. (3) Use 0.068” die cavity & 40 12001 to crimp the center pin on all Milestek 50 Ω BNC plugs. (4) May be crimped with either 3/8” or 1/2” crimp die. Cable strip dimensions applies to ALL 75 Ω BNC plugs, 50 Ω BNC plugs and full crimp video RCA plugs. 0.327” (braid) • 0.146” (dielectric) • 0.158” (center conductor)
102
E
F
I
G
J
KEY PART # A 10-02904 10-02946 B 10-03946 C 10-02914 D 10-03914 E 10-03900 F 10-02947 G 10-03947 H 10-03908 I 10-01002 J 10-01066 K 10-02406-009 L 10-02406-010
H
K
L
BNC ADAPTERS DESCRIPTION 50 Ω BNC “T” F/M/F 50 Ω BNC “T” F/F/F 75 Ω BNC “T” F/F/F 50 Ω BNC Goal Post M/F/F 75 Ω BNC Goal Post M/F/F 75 Ω BNC Barrel F/F 50 Ω BNC Barrel M/M 75 Ω BNC Barrel M/M 75 Ω BNC Right Angle M/F Weco Male (.090) to BNC Female Mini-Weco Male to BNC Female BNC 50 Ω Terminator 1 % 0.5W Resistor BNC 75 Ω Terminator, 1% 0.5W Resistor Analog Applications M 10-03406-029 BNC 75 Ω Terminator, 0.1% 0.5W Resistor Digital Applications
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
M PRICE $2.83 $6.83 $6.07 $3.98 $4.00 $3.25 $1.20 $4.40 $8.00 $11.95 $15.95 $1.27 $1.85 $3.95
Stock Orders Shipped Same Day until 5 P.M. C.S.T
COAXIAL
BNC Tools MILESTEK BNC FAQS Is the quality of MilesTek BC's the same as other brands? Depending on the brand, MilesTek BNC's are equal to or exceed the quality of other competitors. For example, the MilesTek BNC plug bodies are machined from virgin brass in accordance with MIL-C39012 and then plated with bright nickel. Many other less expensive brands have cheaper die cast bodies. Furthermore, the MilesTek BNC body incorporates a beryllium copper wave washer to allow the BNC to flex during mating and to provide firm uninterruptible continuity of the shield signal. Teflon, the best dielectric, provides the proper dielectric for 75Ω impedance and securely holds the captive center pin.
More than 30 µ” is unnecessary for normal use. Some competitive brands have a 75Ω body with 50Ω center pin to eliminate the necessity of a separate center pin crimper. If tested, the connector with 50Ω pin and 75Ω body produces an impedance of approximately 68Ω . Should the BC body have enclosed beryllium copper spring fingers? One manufacturer promotes this idea. Unless the BNC is subject to abuse such as thousands of matings and foreign objects poking into the interface of the connector, this design is unnecessary.
How is your BC center pin different than some other brands? In order to be true 75Ω impedance, the center pin has the same diameter in the crimp area as the mating area. Our captive BNC pins are plated with 30 µ” of gold in accordance with MIL-G-45204.
What about cable pull strength? Pull strength is important on small diameter cables such as 735A. MilesTek BNC plugs have diamond knurling for maximum cable retention. Out of 3,000 to 4,000 coaxial cable assemblies, MilesTek's BNC's for 735A recorded pull test performance of 49.3 Ibs. The minimum specification is 30 Ibs.
Universal BNC Termination Kit
75 Ohm Pin Crimpers The 40-15002 precision tool crimps 75Ω BNC plug center pins. It has 4-way crimping dies per MS22520, full cycle ratchet, built-in pin locator and comfort grips. PART # DESCRIPTION 40-15002 For Digital Video BNCs 40-15005 For Telco BNCs PART # 40-50220
PRICE $199.50
Center Conductor Trimmer The Center Conductor Trimmer automatically cuts the coaxial center conductor to the proper length for MilesTek BNC plugs.
• Universal crimper frame with RG58/59 and RG179/8281 crimp dies • Corex Cable stripper w/extra cassette • Center conductor trimmer • 75ohm pin crimper • Round cable cutter • BNC removal tool
PART # DESCRIPTION 40-15001 Center Conductor Trimmer
Corex II Coax Stripper The Corex II Stripper prepares coax cables with diameters from 0.100” to 0.305” Includes four color-coded V-blocks for different cable sizes and hex wrench. The 3-blade black cassette with strip dimensions of 0.327/0.146 is specifically designed for MilesTek BNC plugs. PART # DESCRIPTION 40-11209 Corex (0.327/0.146) 40-11210 Corex Cassette (0.327/0.146)
PRICE $50.00 $69.99
PRICE $63.95 $19.00
PRICE $8.52
Clothespin Stripper The Clothespin Stripper (CP) prepares RG58, RG59 and RG6/8281. The cassette cutting dimensions are in parentheses. Specifically-designed for MilesTek BNC plugs. PART # DESCRIPTION 40-11310 CP 3-Bl. (0.327/0.146) 40-11311 CP 3-Bl. Cassette (0.327/0.146)
PRICE $16.24 $5.00
MilesTek Universal Crimper Universal Crimper Die Sets
Use with MilesTek 3-piece BNC Crimp plugs.
shown as 40-12100
For Expert Customer Service, Call Our Sales Team Today!
PART # 40-12100 40-12101 40-12115
FRAME & DIE RG58/59/62 RG59/8281 RG179/8281
PRICE $42.67 $36.26 $38.27
PART # 40-12002* 40-12003* 40-12015*
DESCRIPTION RG58/59/62 Die Set: Hex size 0.255/0.213/0.068 RG59/8281 Die Set: Hex 0.324/0.255/0.068 RG179/8281 Die Set: Hex 0.324/0.178/0.068
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
PRICE $17.20 $17.20 $17.20
103
COAXIAL
Coax Cable, F-Connectors
RG6 Dual Shield CATV
RG59 CCTV
CMR Rated • Spool Box PART # 30-01041-WHITE 30-01041-BLACK 30-01042-WHITE 30-01042-BLACK
AWG CONDUCTOR 18 CCS 18 CCS 18 CCS 18 CCS
COLOR White Black White Black
PUT-UP 1000 ft. 1000 ft. 500 ft. 500 ft.
PRICE $99.95 $99.95 $43.33 $43.33
COLOR PUT-UP White 1000 ft. Black 1000 ft.
PRICE $123.75 $123.75
CMR Rated • Spool Box PART # 30-01046-WHITE 30-01046-BLACK
AWG CONDUCTOR 18 CCS 18 CCS
F-TYPE CONNECTORS
PART # AWG/CONDUCTORS CONDUCTOR COLOR PUT-UP 30-01047-WHITE RG59 + 18/2 Solid BC White 500 ft. 30-01047-BLACK RG59 + 18/2 Solid BC Black 500 ft.
KEY A A B B C D E F G H
C E
F
PRICE $150.00 $150.00
F-Type Connectors & Adapters
B
D
PRICE $206.25 $206.25
CMR Rated • Spool Box
CMR Rated • Spool Box
A
PUT-UP 1000 ft. 1000 ft.
RG59 with Siamese Power 18/2 CCTV
RG6 Quad Shield CATV PART # 30-01043-WHITE 30-01043-BLACK
AWG CONDUCTOR COLOR 20 Solid BC White 20 Solid BC Black
G
H
PART # 10-16013-202 10-16013-224 10-16041-202 10-16041-224 10-16908 10-16935 10-16410-002 10-16049 10-16047 10-16044
DESCRIPTION F-Plug RG59 Crimp F-Plug RG6 Crimp F-Plug RG59 Universal Crimp F-Plug RG6 Universal Crimp F-Plug-Jack R/A Adapter F-Push-On Plug/F Jack F-Plug Terminator 75 W F-81 Bulkhead J/J w/Hardware F-81 Bulkhead J/J w/Hardware Single F Grounding Block
PRICE $0.45 $0.45 $0.58 $0.37 $0.78 $0.83 $0.60 $0.15 $0.15 $0.21
F-Type Cords F-type cords have molded cable ends. Both cable and satellite can be run through RG6 F-type cords. Custom Cable lengths available.
RG59 CATV Cables
F-Type CATV Wallplates PART # 60-10801 60-06801 60-10802 60-06802
DESCRIPTION MilesTek Single F CATV Wallplate White MilesTek Single F CATV Wallplate Ivory MilesTek Dual F CATV Wallplate White MilesTek Dual F CATV Wallplate Ivory
Video RF Splitters KEY I J K L M N O
104
PART # 90-10112 90-10113 90-10114 90-10115 90-10116 90-10117 90-10118
PART # 33-100-36 33-100-72 33-100-144 33-100-300
PRICE $0.85 $0.85 $1.30 $1.30
SIZE 3 ft. 6 ft. 12 ft. 25 ft.
RG6 CATV Cables PRICE $1.76 $2.16 $3.17 $5.01
PART # 33-300-36 33-300-72 33-300-144 33-300-300
SIZE 3 ft. 6 ft. 12 ft. 25 ft.
PRICE $1.91 $2.60 $3.25 $3.46
40-12116 CATV Crimper only
PRICE $64.95 $38.27
F-Plug Installation Kit I J K DESCRIPTION 2-Way 5-900 MHz Gold 3-Way 5-900 MHz Gold 4-Way 5-900 MHz Gold 6-Way 5-900 MHz 8-Way 5-900 MHz 2-Way 2 GHz Satellite 4-Way 2 GHz Satellite
L PRICE $0.69 $1.04 $1.12 $2.38 $2.62 $1.80 $5.15
M
N
O
The F-plug installation kit has a crimper, 2-step coax cable stripper, round cable, flush cutter, two F-plug installation tools for RG59 and RG6, a blow molded case and instructions. CATV crimper frame/die terminates F-plugs for RG59 and PART # DESCRIPTION RG6 both regular and 40-50223 CATV Kit quad shield connectors.
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
Stock Orders Shipped Same Day until 5 P.M. C.S.T
COAXIAL
Compression Connectors MilesTek Compression Tool
RG59 & RG6 Compression Connectors
A
for Compression Connectors
MilesTek's high-quality compression connectors are the perfect solution for all of your RG59 and RG6 coaxial terminations.
• Rugged, light weight: accommodates full-line of compression connectors
Connector Features and Benefits: • Unique inspection window assures correct placement of connector on cable • Colored identification band helps you match the right connector to the right cable • 360-degree radial design provides complete electrical continuity • 80-pound pull strength between connector and cable
• Ratcheting handle doesn't release until connector is fully terminated
MilesTek Coax Stripper
KEY PART# D 10-21011-234 E 10-16024-234 10-03011-234 F 10-03011-237 G 10-21011-237 H 10-16019-237 I 10-03011-240 J 10-21011-240 K 10-16017-240
B
for Compression Connectors (RG59, RG6, Mini RGB Coax)
• One Stripper does it all! • Perfectly strips RG59, RG6, Mini 23-26 AWG RGB Coax • Strips all appropriate cable types without changing out cartridge
D
CONNECTOR RG6 Quad (18 AWG) RG6 Quad (18 AWG) RG6 Quad (18 AWG) RG6 (18 AWG) RG6 (18 AWG RG6 (18 AWG) RG59 (20 AWG) RG59 (20 AWG) RG59 (20 AWG)
RG6 Quad (18 AWG)
E
TYPE RCA F BNC BNC RCA F BNC RCA F
PRICE $21.02 $10.00 $49.15 $49.15 $34.60 $10.00 $49.15 $34.60 $10.00
RG6 Quad (18 AWG)
MilesTek Basic Coax Stripper
C for Compression Connectors (RG59, RG6 coax)
Preset coaxial cable stripping tool - This stripper quickly and simply strips RG59 and RG6 coaxial cables for MilesTek compression type connectors. KEY A B C
PART# 40-40397 40-11412 40-40396
CONNECTOR MilesTek Compression Tool MilesTek Coax Stripper MilesTek Basic Coax Stripper
PRICE $63.64 $32.73 $13.18
F
RG6 (18 AWG)
G
H
RG6 (18 AWG)
I
RG59 (20 AWG)
K
RG59 (20 AWG)
J
Solid 25 & 23 AWG Mini RGB Cable
RG6 (18 AWG)
RG59 (20 AWG)
25 & 23 Solid AWG Compression Connectors SOLID 25 AWG CONNECTORS - Sold in 25 pkg. L
Solid gauge center conductor provides better performance, lower attenuation and signal distance than stranded gauge cables. Our 25 gauge cables, available in PVC or Plenum, have a small diameter and are good for shorter run RGB runs. The 23 gauge cable is a little larger and offers higher bandwidth and longer distance capability. All cables are swept tested to 3 GHz. PART # 30-01030-500 30-01030-1K 30-01034-500 30-01034 30-06016
AWG/CONDUCTORS 25/5 25/5 25/5 25/5 23/5
For Expert Customer Service, Call Our Sales Team Today!
JACKET PVC PVC PLENUM PLENUM PVC
PUT-UP 500 ft. 1000 ft. 500 ft. 1000 ft. 500 ft.
PRICE $543.75 $870.00 $467.50 $935.00 $650.00
M
SOLID 23 AWG CONNECTORS - Sold in 25 pkg. N
KEY L M N O
O
PART# 10-03011-219 10-21011-219 10-03011-217 10-21011-217
CONNECTOR RG59 (25 AWG) RG59 (25 AWG) RG59 (23 AWG) RG59 (23 AWG)
Order at milestek.com or call 800-524-7444 E-mail:
[email protected] Fax: 940-484-9402
TYPE BNC RCA BNC RCA
PRICE $60.40 $53.95 $60.40 $53.95
105
