0407600.03-catalogo Inox Uk

Transcript

0407600.03-COPERTINA CATAL INOX 28-04-2003 17:39 Pagina 1 METALLIC UNIT-COMPOSED SYSTEM FOR THE ELECTROTECHNIC AND ELECTRONIC INDUSTRY 22035 Canzo - Como (Italy) Via Monte Barzaghino, 6 tel. ++39 031.673.611 fax ++39 031.670.525 www.eta.it [email protected] Eta Enclosures (UK) Limited Unit 4, Kea Park Close, Hellaby Industrial Estate Rotherham South Yorkshire S66 8LB tel. ++44 (0) 1709 730111 fax ++44 (0) 1709 544088 www.eta-enclosures.co.uk [email protected] Eta S.p.A. France Rue du Pré aux Bœufs BP455 76806 Saint Etienne du Rouvray tel. ++33 (02) 35 64 34 70 fax ++33 (02) 35 64 22 75 [email protected] 28-04-2003 17:39 Pagina 2 inox 0407600.03-COPERTINA CATAL INOX catalog 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 1 index introduction 2 Areta suite cabinet in stainless steel 4 Areta suite cabinet in stainless steel with glazed door 6 complementary accessories 7 Areta modular cabinet in stainless steel 11 Areta pc cabinet in stainless steel with pull-out keyboard 11 ATB8 monobloc cabinet in stainless steel 12 complementary accessories 13 STX stainless steel boxes with plain door 14 STPX stainless steel boxes with glazed door 16 complementary accessories 16 SDX stainless steel terminal boxes 18 complementary accessories 18 ZBX stainless steel monobloc control desks 19 stainless steel modular control desks 21 complementary accessories 24 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 2 introduction stainless steel A highly corrosion resistance iron-based alloy containing between 18% and 20% chromium. Stainless steel is the strongest of the corrosion resistance materials. It exhibits many of the same resistances attributed to Fibreglass materials as well as resistance to polar solvents such as acetone. Generally 2 grades of stainless steel are available dependant on the application and environment the enclosures are to be placed. Grade 304 is the most common and is suitable for environments such as food processing or in general wet area’s where a degree of corrosion resistance is required. Grade 316 material has a higher content of nickel and is generally used for highly corrosive environments such as off-shore or petro-chemical plants. Various elements of the materials are: Austenitic steel: Fe + Cr (16÷28%) + Ni (6÷32%) + C (0.02÷0.1%) Ferritic steel: Fe + Cr (10.5÷30%) + C (0.02÷0.1%) Martensitic steel: Fe + Cr (12÷19%) + C (0.08÷1.2%) ETA manufactures from grade 304, offered as the standard, and the more resistant AISI316, manufactured on request. AISI304 and AISI316: chemical and physical characteristics Grade 304 and 316 are both austenitic, with chrome percentage more than 16% and nickel percentage more than 6%. In the below table are listed the main chemical and physical characteristics of austenitic steel. international denomination EN 10088-2 European standard UNI 8317 Italian standard AISI ASTM BS (American International British DIN 174 Iron Standard Standard & Steel Worldwide 1449pt2 Institute) A240 chemical composition AFNOR NFA35-573 Assoc. Francese di normalizzazione JIS Japan Industrial standard C% Si% Mn% X5CrNi18-10 WN 1.4301 304 S30400 304S15 Z7CN1809 SUS304 0,08 1 2 X5CrNiMo17-12-2 WN 1.4401 316 S31600 316S31 Z7CND1711 02 SUS316 0,06 1 2 Cr% Ni% Mo% 18÷20 8÷10 0 16÷18,5 10÷13 2÷2,5 mechanical properties of grade 304 tensile strength Rm min, N/mm2 0.2% yield strength Rp min N/mm2 700 450 mechanical properties of grade 316 Tensile strength Rm min, N/mm2 0.2% yield strength Rp min N/mm2 800 600 Eta manufacturing cycle of stainless steel products Eta’s manufacturing process of stainless steel product follows a strict quality system to ensure optimum product quality is achieved. The various manufacturing processes which are constantly being reviewed and up-graded include: a) laser cutting operation, achieved by using high-tech precision machinery b) folding operation, achieved by using specific tools c) welding operation, achieved by using TIG technology in inert atmosphere that allows minimal heat generation around the welded area d) grinding, polishing operation and rounding of the edges, in order to obtain a uniform and clean surface and to avoid sharp edges e) gasket positioning operation, fully automated, maximises IP rating f) brushing operation, made by automatic process that allows for clean, even surfaces typical for hygiene requirements. As 304 is the most common grade of steel used, 120 grit level is the most popular grain finish. Other grades, e.g. 230, can be provided on request. Panels of stainless steel floor standing cabinets are pre-stained and supplied with a PVC covering to protect the material during handling g) assembling: the product is finally packed in plastic bags and then into a heavy-duty carton to provide protection during transportation 2 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 3 technical charts characteristics INSENSITIVENESS TO LOW TEMPERATURES HIGH FIRE RESISTANCE EXCELLENT MECHANICAL RESISTANCE BETTER HYGIENE STRENGTH ULTRAVIOLET RAYS RESISTANCE EARTHING EMC SHIELDING CORROSION RESISTANCE reliable performance even at temperatures below zero, due to its properties of high toughness and plasticity stainless steel keeps its mechanical characteristics for a period 3 times more than mild steel. Consequently it allows to avoid additional surface treatments like painting or plating recommended for applications in seismic areas no additional maintenance is required, other than cleaning stainless steel is structurally stronger than mild steel no deterioration when exposed to sunlight can be fully earthed, unlike insulated enclosures stainless steel enclosures are easily EMC shielded see chart on the side use AISI 304 AISI 316 is moderately priced and generally accepted as the norm for many applications in food industry or chemical contains more chromium, is more corrosion resistant, but also more expensive chemical resistances acciaio 304 316 acciaio 304 316 acetylene zinc chloride vinegar sulphur chloride acid fumes coke acetone (100% at 100°C) ether (100%) acetic acid (20%) formaldehyde boric acid (5%) ammonium phosphate butyric acid sodium phosphate cianidric acid (100%) furfural (100%) citric acid (5%) gas of humid chlorine chloridric acid cookery gas chromic acid (5%) gelatine fluoridric acid glycerine phosphoric acid (5%) ethylic glycol (100%) lactic acid (5%) glucose linoleic acid (100% at 100°C) shellac malic acid (10-40% at 50°C) ammonium hydroxide (40%) muriatic acid calcium hydroxide (10% at 100°C) nitric acid (10% at 80°C) magnesium hydroxide (10% at 100°C) oleic acid (100%) potassium hydroxide (50%) oxalic acid (5%) sodium hydroxide (20%) picric acid calcium hypo chlorite 100% sulfydric acid 100% humid sodium hypo chlorite (100%) sulphuric acid, 5% boiling milk sulphuric acid, fuming yeast sulphurous acid 100% mayonnaise stearic acid (100% up to 100°C) molasses tartaric acid (10% at 100°C) mustard water, pure ammonium nitrate (10-50%) hydrogen peroxide (10-30%) sodium nitrate (10-40%) turpentine mineral oils ethylic alcohol vegetal oils methyl alcohol (100%) paraffin melted aluminium sodium perborate (10% up to 100°C) ammonia, dry hydrogen peroxide (10%) acetic anhydride (100%) sodium peroxide (10% up to 100°C) carbon dioxide, dry melted lead sulphurous anhydride (90%) propane aniline (100%) soap soak sugar syrup chrome bath whey photo fixing bath sodium silicate (100% at up to 100°C) photo developing bath aluminium sulphate (10%) petrol ammonium sulphate benzol, hot and cold ferric sulphate (10%) sodium bicarbonate ferrous sulphate beer magnesium sulphate sodium bisulphate (15% at 85°C) nickel sulphate (30%) carbon bisulphide potassium sulphate (10% up to 100°C) borax, 5% hot copper sulphate (10%) butane sodium sulphate (10%) coffee zinc sulphate (10%) clorine, dry sodium sulphide (10%) camphor concentrated orange juices sodium carbonate (5% up to 65°C) concentrated lemon juices sodium citrate, hot and cold carbon tetrachloride (10%) chloroform (100%) sodium thiosulfate (10-60% up to 100°C) ammonium chloride (1%) toluol ferric chloride (5-50%) trichlorethylene (100% at 100°C) ferrous chloride (10-20%) paintings magnesium chloride (up to 20%) wine mercury chloride (10%) whisky nickel chloride (10-30%) melted zinc potassium chloride melted sulphur sodium chloride (5%) risk of corrosion no corrosion possibility of corrosion data not available 3 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 4 Areta stainless steel characteristics Rails are made up of unique closed profile manufactured from 1.5 mm AISI 304 stainless steel. The frame corners are manufactured with orthogonal joints in AISI 304 stainless steel, laser welded to the rails. Doors manufactured from sp. 20/10 AISI 304 (AISI 316 on request) satin stainless steel with tubular stiffening frame. Hinges are made in zinc alloy, chrome plated, open 180° (Hinges manufactured from AISI 316 stainless steel on request). Rear panel manufactured from 1.5 mm AISI 304 (AISI 316 on request) satin stainless steel. Roof manufactured from sp. 15/10 AISI 304 (AISI 316 on request) satin stainless steel. Bottom manufactured from sp. 15/10 AISI 304 (AISI 316 on request) satin stainless steel. protection degree IP 55 NEMA 12 according to EN 60529. IK 10 according to EN 50102. certifications supply includes • • • • • structure doors complete with ø 3mm double bar locking system. rear panels removable roof bottom with removable cable entry Eyebolts and/ or lifting brackets to be ordered separately (see page 10). Areta stainless steel single blank door code cabinet dim. mod. art. ARETX 061804PR 061805PR 062005PR 062006PR 081804PR 081805PR 082005PR 082006PR 101805PR 101806PR 102005PR 102006PR (*) With side panels mounted overall dimension is 616, 816, 1016. To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ARETX-082005PRH. L (*) A usable inner area P 1809 600 2009 1809 800 2009 1809 1000 2009 W 414 514 514 614 414 514 514 614 514 614 514 614 H 1700 500 1900 1700 700 1900 1700 900 1900 I 300 400 400 500 300 400 400 500 400 500 400 500 N 1630 1830 1630 1830 1630 1830 Areta stainless steel double blank door code (*) With side panels mounted overall dimension is 1216. To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ARETX-082005PRH. cabinet dim. mod. art. ARETX 121804PR 121805PR 122005PR 122006PR L (*) 1809 1200 Additional sizes available on request. Flatpack delivery available on request. 4 A 2009 usable inner area P 414 514 514 614 W H 1700 1100 1900 I 300 400 400 500 N 1630 1830 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 5 Areta stainless steel Areta stainless steel single blank door Areta stainless steel double blank door 5 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 6 Areta stainless steel with glazed door characteristics Rails are made up of unique closed profile manufactured from 1.5mm AISI 304 stainless steel. The frame corners are manufactured with orthogonal joints in AISI 304 stainless steel, laser welded to the rails. Doors manufactured in 2mm AISI304 (AISI316 on request) material with stiffening frame and plexiglass viewing window. Hinges are made in zinc alloy, chrome plated (hinges manufactured from AISI 316 stainless steel on request). protection degree IP 55 NEMA 12 according to EN60529. IK 10 according to EN50102. certifications supply includes • • • • • structure doors with plexiglass complete with ø 3 mm double bar locking system rear panels removable roof bottom with removable cable entry code cabinet dim. mod. art. ARETX 061804PX 061805PX 062005PX 062006PX 081804PX 081805PX 082005PX 082006PX 101805PX 101806PX 102005PX 102006PX width height 1809 600 2009 1809 800 2009 1809 1000 2009 B 414 514 514 614 414 514 514 614 514 614 514 614 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ARETX-082005PXH. 6 A depth 1809 600 2009 1809 800 2009 1809 1000 2009 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 7 complementary accessories STAINLESS STEEL PLINTH Manufactured in 2 mm AISI 304 stainless steel material (AISI 316 on request) with two side gland plates. code mod. cabinet dim. art. width 060040 060050 060060 080040 080050 080060 100050 100060 120040 120050 120060 060040 060050 060060 080040 080050 080060 100050 100060 120040 120050 120060 ATX1 ATX2 600 800 1000 1200 600 800 1000 1200 depth 400 500 600 400 500 600 500 600 400 500 600 400 500 600 400 500 600 500 600 400 500 600 plinth dim. A B 378 478 578 378 478 578 478 578 378 478 578 378 478 578 378 478 578 478 578 378 478 578 600 800 1000 1200 600 800 1000 1200 C D 100 200 200 300 400 200 300 400 300 400 200 300 400 200 300 400 200 300 400 300 400 200 300 400 E 50 button hole 150 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATX1-080050H. FRONT INSERTED MOUNTING PLATE ATPA Manufactured from sendzimir sheet steel • thickness 2.5mm for L≤1000 • thickness 3mm for L>1000 mounting plate code cabinet dim. mod. art. ATPA 060180 060200 080180 080200 100180 100200 120180 120200 B 600 800 1000 1200 plate A 1809 2009 1809 2009 1809 2009 1809 2009 L 485 685 885 1085 H 1680 1880 1680 1880 1680 1880 1680 1880 * For L ≥ 1400 Mounting plate manufactured with two parts with horizontal union and stiffening omega TO BE ORDERED SEPARATELY MOUNTING ACCESSORIES: WTKB - 002 7 0407600.03-CATALOGO INOX UK 28-04-2003 17:41 Pagina 8 complementary accessories SIDE INSERTED MOUNTING PLATE ATPL Manufactured from sendzimir sheet steel • thickness 2.5mm for L≤1000 • thickness 3mm for L>1000. Supply includes mounting accessories and sliding guides. mounting plate code cabinet dim. mod. art. B ATPL 060180 060200 080180 080200 100180 100200 120180 120200 600 800 1000 1200 plate A 1809 2009 1809 2009 1809 2009 1809 2009 L H 1685 1885 1685 1885 1685 1885 1685 1885 600 800 1000 1200 * For L ≥ 1400 Mounting plate manufactured with two parts with vertical union and stiffening omega SIDE PANELS ATFX Manufactured from 1.5mm AISI 304 stainless steel material (AISI 316 on request). supply includes • two side panels • rapid fasten couplers • mounting accessories side panels code cabinet dim. mod. art. ATFX 040180 050180 060180 050200 060200 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATFX-050200H. 8 height 1800 2000 depth 400 500 600 500 600 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 9 complementary accessories INNER DOOR ATPIX Manufactured from 2mm AISI 304 stainless steel material (AISI 316 on request) and supplied complete with vertical uprights and horizontal rails. supply includes • door complete with ø 3mm double bar locking system • hinges • vertical uprights and horizontal rails • mounting accessories inner door code cabinet dim. mod. art. ATPIX 060180 060200 080180 080200 100180 100200 B inner door A 1809 2009 1809 2009 1809 2009 600 800 1000 L 467 667 867 H 1667 1867 1667 1867 1667 1867 profile To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATPIX-080200H. 90° STAINLESS STEEL HINGE WTCE-090001XH Manufactured in AISI 316 stainless steel material. Supply includes 4 pieces, with pins and clips in AISI 316 material. Available on request. STAINLESS STEEL MOUNTING ACCESSORIES WTAX Available on request. 1. REAR PANEL FIXING BRACKETS WTAX-100H Manufactured in AISI 316 material. Supply includes 8 pieces. 1 3 2. SIDE PANELS FIXING BRACKETS WTAX-200H Manufactured in AISI 316 material. Supply includes 16 pieces. 3. DOOR LOCKING POINTS WTAX-300H Manufactured in AISI 316 material. Supply includes 4 pieces. 2 9 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 10 complementary accessories LEVELLING FEET WTPX - 001 They can be applied on the cabinet structure or plinth. They make easier the floor cleaning and adjust different height. 180° CHROME HINGES WTCE - 180001C Supply includes 4 pieces. 180° HINGES AISI 316 STAINLESS STEEL WTCE - 180001X Supply includes 4 pieces. EYEBOLTS WTGS - 001 Zinced M12 lifting eyebolts. Supply includes 4 pieces. Stainless steel article on request. WTSS - 001 5mm zinced sheet steel lifting brackets. Supply includes 4 pieces. JOINING KIT ATKU - 002 To be used to join two cabinets together. It is better to use lifting brackets WTSS-001 instead of lifting eyebolts. Supply includes union spacers, fixing accessories and gasket to guarantee IP protection degree. Upon request available in chrome plated material. REINFORCING BRACKETS ATKU - 003 Manufactured from 4mm zincpassivated sheet steel. To be used to grant more rigidity to cabinets joined in a suite. Supply includes: 4 pieces, mounting accessories. 10 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 11 Areta stainless steel ARETA MODULAR STAINLESS STEEL Upon request, power distribution boards in stainless steel are available. (Cubicles made in sendzimir sheet steel). Areta pc in stainless steel with pull-out keyboard characteristics The PC front with pull-out keyboard includes: Structure in AISI 304 material with rear panel. AISI 316 on request. Top glazed door in stainless steel for monitor viewing Pull-out keyboard drawer with mouse support Lower door in stainless steel. Sealed box for keyboard. Adhesive double side tape for keyboard fixing. Gasket and mounting accessories. Monitor support. protection degree IP 55. dimensions code width height depth mod. art. 600 600 1800 2000 600 600 ATPCX ATPCX 061806CE 062006CE To be ordered separately: • side panels ATFX see page 8 • plinth H=100, H=200 see page 7 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATPCX-061806CEH 11 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 12 ATB8 monobloc cabinet in stainless steel - ATB8X characteristics Fully welded structure manufactured from 1.5mm AISI 304 (AISI316 on request) material with removable rear panel. Door manufactured from 2mm AISI304 (AISI316 on request) material with stiffening frame. protection degree IP 55. supply includes Cabinet structure Door complete with ø3 mm double bar locking system. Adjustable cable entry. dimensions code L H P mod. art. 600 600 600 600 600 800 800 800 800 800 1000 1000 1200 1200 1200 1600 1800 1800 2000 2000 1600 1800 1800 2000 2000 1800 2000 1800 1800 2000 400 400 500 400 500 400 400 500 400 500 400 400 400 500 400 ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X ATB8X 061604PR 061804PR 061805PR 062004PR 062005PR 081604PR 081804PR 081805PR 082004PR 082005PR 101804PR 102004PR 121804PR 121805PR 122004PR To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATB8X-062005PRH. Available on request. PLINTH Manufactured in 2 mm AISI 304 stainless steel material (AISI 316 on request) with two side gland plates. code mod. button hole ATX6 ATX7 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ATX6-060050H. 12 cabinet dim. art. 060040 060050 080040 080050 100040 120040 120050 060040 060050 080040 080050 100040 120040 120050 width 600 800 1000 1200 600 800 1000 1200 depth 400 500 400 500 400 400 500 400 500 400 500 400 400 500 plinth dim. A 600 800 1000 1200 600 800 1000 1200 B 340 440 340 440 340 340 440 340 440 340 440 340 340 440 C 100 200 D 200 300 200 300 200 200 300 200 300 200 300 200 200 300 E 50 150 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 13 complementary accessories MOUNTING PLATE ATPA Manufactured from sendzimir sheet steel • thickness 2.5mm for L≤1000 • thickness 3mm for L>1000 mounting plate code cabinet dim. mod. art. ATPA 060160 060180 060200 080160 080180 080200 100180 100200 120180 120200 B 600 800 1000 1200 plate A 1609 1809 2009 1609 1809 2009 1809 2009 1809 2009 L 485 685 885 1085 H 1480 1680 1880 1480 1680 1880 1680 1880 1680 1880 TO BE ORDERED SEPARATELY MOUNTING ACCESSORIES WTAC - 002 WTGS - 003 Zinced M12 lifting eyebolts. Supply includes 4 pieces with nuts and washers. 13 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 14 STX stainless steel boxes characteristics Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. protection degree IP 65 complying with EN60529. supply includes • • • • box mounting plate locking system body in zinc alloy and lever in stainless steel with ø 3mm double bar key package with hardware for earth connection and screws to mounting plate certifications box with single blank door code mod. art. STX2 STX3 STX3 STX4 STX4 STX4 STX4 STX5 STX5 STX6 STX6 STX6 STX6 STX6 STX6 STX6 STX8 STX8 STX8 315 415 420 315 420 520 620 520 725 620 625 630 820 825 830 1230 830 1030 1230 B A P C D E F weight kg 200 300 300 400 400 400 400 500 500 600 600 600 600 600 600 600 800 800 800 300 400 400 300 400 500 600 500 700 600 600 600 800 800 800 1200 800 1000 1200 150 150 200 150 200 200 200 200 250 200 250 300 200 250 300 300 300 300 300 150 250 250 350 350 350 350 450 450 550 550 550 550 550 550 550 750 750 750 250 350 350 250 350 450 550 450 650 550 550 550 750 750 750 1150 750 950 1150 * 215 215 315 315 315 315 415 415 515 515 515 515 515 515 515 715 715 715 219 319 319 219 319 419 519 419 619 519 519 519 719 719 719 1119 719 919 1119 6 9,5 11 9,5 13,5 15,5 18 18 27 24,5 27 30 31 34 37 54 48 58 67 * B=200 M6 studs welded only on the hinge side. To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: STX2-315H. Please contact Eta sales department for minimum order quantities. box with double blank door code mod. art. STX10 STX10 1030 1230 B A C D E F G G’ I I’ weight kg 1000 1000 1000 1200 935 935 950 1150 954 954 954 1154 415 415 375 375 919 1119 919 1119 69 80 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: STX10-1030H. 14 0407600.03-CATALOGO INOX UK 28-04-2003 17:42 Pagina 15 box with single blank door section X-X with open door central lock for A<600 box with double blank door section X-X with open door section Y-Y with open door 15 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 16 stainless steel boxes with glazed door - STPX characteristics Enclosure manufactured in AISI 304 material (AISI 316 on request). Door manufactured in AISI 304 material with plexiglass viewing window. AISI 316 on request. Mounting plate manufactured in 2.5mm zinc-plated steel. Hinges in stainless steel. protection degree IP 55. supply includes • • • • • • box mounting plate with fixing accessories gland plate with sealing gasket ø 3mm double bar key screws for earthing mounting accessories certifications dimensions code B A L H P mod. art. 300 400 400 500 600 600 400 500 600 700 800 800 160 260 260 360 460 460 285 385 485 585 685 685 200 200 200 250 200 250 STPX3 STPX4 STPX4 STPX5 STPX6 STPX6 420 520 620 725 820 825 central lock for A<600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: STPX4-620H. stainless steel accessories STAINLESS STEEL INNER DOOR STPO1 ... X characteristics Frame and door manufactured from 1.5mm AISI304 material (AISI316 on request). protection degree External: same of the box. Internal: IP20. supply includes • • • • inner door kit dimensions 16 frame door locking system in stainless steel mounting accessories code L H mod. art. 300 400 400 500 600 400 500 600 700 800 STPO1 STPO1 STPO1 STPO1 STPO1 34X 45X 46X 57X 68X To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: STP01-46XH. 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 17 stainless steel accessories STAINLESS STEEL MODULAR KIT characteristics Frame manufactured from 1.5mm AISI 304 material. Front panels manufactured from 1.5mm AISI 304 material. AISI 316 available on request. protection degree External: same of the box. Internal: IP20. supply includes • frame • front panels with modular slots complete with mounting accessories • zinc plated DIN rails • mounting accessories dimensions code width depth mod. art. 400 600 600 800 MDSTX4 MDSTX6 600 800 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: MDTX4-600H. STAINLESS STEEL RAIN CANOPY TTX To protect against direct water entry. Manufactured in 1.5mm AISI 304 stainless steel material. AISI 316 available on request. dimensions code width depth mod. art. 400 500 500 600 800 200 200 250 250 300 TTX1 TTX1 TTX2 TTX1 TTX2 04 05 05 06 08 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: TTX1-04H. STAINLESS STEEL WALL MOUNTING BRACKETS SDWCX Manufactured in 2.5mm stainless steel. Supply includes: 4 pieces. code mod. art. SDWCX 010 17 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 18 SDX stainless steel terminal boxes characteristics Boxes manufactured from AISI 304 (AISI 316 on request). Lid fixing with stainless steel screws. Holes for fixing the hinges. protection degree IP 65 complying with EN60529. certifications code section Y-Y 25 25 dimensions mod. art. B A SDX1 SDX2 SDX3 SDX1 SDX4 SDX3 108 208 208 112 212 312 150 200 300 150 400 300 150 weight P kg. 1.1 1.7 2.2 1.6 3.3 3.5 80 200 150 200 300 120 To be ordered separately mounting plate (see page 8) and/or DIN rails (for DIN rails see general catalogue, page 146). To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: SDX1-108H. section X-X complementary accessories MOUNTING PLATE SDPA Manufactured from 2mm sendzimir sheet steel. Supply includes: single piece. code box dim. mod. art. width height SDPA SDPA SDPA SDPA SDPA 11 22 32 33 42 150 200 300 300 400 150 200 200 300 200 B A weight 140 176 276 276 376 140 170 170 270 170 0.45 0.59 0.92 1.46 1.26 kg. WALL MOUNTING BRACKETS SDWCX To be ordered separately: see page 17. 18 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 19 ZBX monobloc control desks characteristics Structure manufactured from 1.5mm AISI 304 stainless steel material Mounting plate manufactured from 2.5mm sendzimir sheet steel mounted on the rear cover. Upper cover manufactured from 1.5mm AISI 304 material with mechanical stop. Adjustable cable entry. AISI 316 available on request. protection degree IP 55. supply includes • ZBX control desk • doors complete with ø 3mm double bar key • mounting plate • upper cover complete with locking system • adjustable gland plate control desks mod. ZBX6 ZBX8 ZBX0 ZBX2 01 01 01 01 width 600 800 1000 1200 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ZBX6-01H. 19 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 20 ZBX monobloc control desks mounting plate PLINTH Manufactured from 2mm AISI 304 material with gland plates. AISI 316 available on request. mod. ZCX4 ZCX4 ZCX4 ZCX4 105 109 113 117 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ZCX4-105H. 20 width 600 800 1000 1200 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 21 modular control desks 400mm depth code width mod. art. AEX6 AEX8 AEX1 AEX1 01 02 23 64 600 800 1200 1600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: AEX6-01H. code width mod. art. LEX6 LEX8 LEX1 LEX1 01 02 23 64 600 800 1200 1600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: LEX6-01H. code width mod. art. PEX6 PEX8 PEX1 PEX1 01 02 23 64 600 800 1200 1600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: PEX6-01H. code width mod. art. MEX6 MEX8 MEX1 MEX1 01 02 23 64 600 800 1200 1600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: MEX6-01H. BOX AEX characteristics Structure manufactured from 1.5mm AISI 304 material. Mounting plate manufactured from 2.5mm sendzimir sheet steel. Door manufactured from 1.5mm AISI 304 material with lateral stiffening cover. AISI 316 available on request. supply includes • box • door complete with ø 3mm double door closing system • mounting plate • adjustable gland plate SHELF LEX characteristics Structure manufactured from 1.5mm AISI 304 material. Upper panel manufactured from 2mm AISI 304 material with zincpassivated rails. Gas springs to support lid. AISI 316 available on request. supply includes • control desk • lid complete with ø 3mm closing system • rails to mount supplementary mounting plate • sealing gasket • mounting accessories UPPER PART PEX characteristics Structure manufactured from 1.5mm AISI 304 material. Mounting plate manufactured from 2.5mm sendzimir sheet steel with zincpassivated rails for mounting plate adjustment. Hinged front panel manufactured from 2mm AISI 304 material complete with zincpassivated vertical rails and mechanical stop. AISI 316 available on request. supply includes • upper part • hinged front cover with ø 3mm double bar key • mounting plate • sealing gasket • mounting accessories SHELF MEX characteristics Structure manufactured from 1.5mm AISI 304 material. Upper panel manufactured from 2mm AISI 304 material with zincpassivated rails. Gas springs to support lid. AISI 316 available on request. supply includes • control desk • lid complete with ø 3mm closing system • sealing gasket • mounting accessories protection degree IP 55 complying with EN60529 NEMA 12. certifications 21 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 22 modular control desks 400mm depth AEX LEX PEX 22 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 23 modular control desks 400mm depth MEX section A-A 23 0407600.03-CATALOGO INOX UK 28-04-2003 17:43 Pagina 24 accessories for modular control desks COVER TLX Manufactured from 1.5mm AISI 304 material (AISI 316 on request). To be used as top cover of the LEX shelf. supply includes Single piece, mounting accessories. code mod. TLX6 TLX8 TLX1 TLX1 width LEX art. 01 02 23 64 600 800 1200 1600 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: TLX6-01H. code mod. ZCX4 ZCX4 width A B 105 109 117 121 205 209 217 221 600 800 1200 1600 600 800 1200 1600 600 800 1200 1600 600 800 1200 1600 100 200 To order a stainless steel enclosure in high grade AISI 316, please add H to the catalogue number. E.g.: ZCX4-105H. 24 PLINTH FOR BOX AEX Manufactured from 2mm AISI 304 material with gland plates. AISI 316 available on request. art.