Preview only show first 10 pages with watermark. For full document please download

05/13 Revised Cost Sheet- Use With Bid Submittal

   EMBED


Share

Transcript

COMPANY (Bidder) NAME: RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ______________________________ Instructions: 1. Enter Company (Bidder) Name on top of each of the 8 cost sheets. 2. Enter the manufacturer, model number, warranty available, delivery timeline ARO, Energy Star rebate amount available, note when Installation can be provided (at time of delivery or a different date after equipment delivery). Indicate differences ON THE COST SHEET between equipment model bid and the equipment model listed in the item specification so the differences can be easily identified. If an extended warranty is available, indicate this along with the price. 3. Enter Unit Bid Price per unit. Each bid price must include all packing, freight, installation, labor, service connections (to include all utility hookups, debris removal and insurance costs) Refer to Section 4.3. 4. Enter the Extended Item Total for each of the Items listed by multiplying the Unit Quantity by the Unit Bid Price. Item # / Location ITEM 1 FLCI ITEM SPECIFICATIONS & SERVICE NEEDS Alto-Shaam Model No. CTC20-20G Combitherm CT Classic Combination Oven/Steamer, Natural Gas, boiler-free, floor model with roll-in cart, Cart with capacity of (20) full-size sheet pans or two deep (40) full-size hotel or GN 1/1 pans, Cart with (20) non-tilt support rails, (2) side racks, Classic Controls with steam/convection and combination steam with convection cooking modes, SafeVent steam venting, two fan speeds, Combi Clean with one (1) cleaning level, CoolTouch3 triple pane glass window, door hinged right, high efficiency LED lighting, Stainless steel construction, Six (6) adjustable stainless steel flanged legs, EcoSmart technology for reduced energy and water consumption 120V, 60HZ, 1 Phase, 7.0 AMPS, 0.84kW, 14 AWG, NEMA 5-20P, 6ft cord and plug cULus, CE, and UL ANSI/NSF 4 listed, IP X5, Gastec Correctional/Prison Security Device Base Package with Tamper-Proof Screws, without probe. 5017145 Control Panel Security Cover Factory Installed Anti-entrapment device 5017148 Correctional Institution Roll-in Pan Cart, 20 support rails, stainless steel construction, four (4) casters, and two (2) casters are locking. Mechanical Start-up Check service required. FI-28728 Combi Guard 20-Triple-Guard Water Filtration System, temperature range 35 F to 100 F, 3/4" NPT, 125 psi maximum pressure (includes 1 filter cartridge), for 4.10, 10.20, 12.18, 12.20, 20.20 and stacked units. Standard manufacturer's one-year warranty. Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Oven unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. All doorways are 46” wide or wider between the loading dock and the kitchen. Contractor to provide oven installation by a licensed service provider on the day of delivery compliant with manufacturer’s warranty. All Utilities are in place at facility for installation. No old equipment removal needed. Detail on Equipment Being Bid Unit Quantity Manufacturer: 1 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ Item # / Location ITEM 2 GBCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Fish Oven Model 75-36, Gas Fired Revolving Tray Oven Oven standard features with Full circle heat flow design, Pre-wired, Natural Gas, without steam option oven with dual push button drive.Oven to be equipped with all standard controls and features, including Pre-mixed line gas burner. Electrical hookups must be on the right side of the oven. Exterior finish to be stainless steel front, stainless steel left-side side panel, and two corners with stainless steel trim. Two internal bake lights to provide full interior illumination.Six solid ten-gauge steel metal tray hearths measuring 26"D x 112"W, with 36 (18" x 26") bun pan capacity, 200 (5" x 9") bread pan capacity, with tray levelers and stabilizers. 1.5" gas line, 9' diameter exhaust stack, 6" diameter door vent flue, Horizontal Baker Door, with Right Side cleanout door.Burner (400,000 BTUs), ETL Approved and NSF MarkedA.C., 115V, 60HZ, 1 Phase, 20AMPS, electrical specifications.Correctional/Prison Security Device Package. Standard manufacturer's one-year warranty. Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries available between 8:00-11:00AM and 1:004:30PM. Other arrangements can be made to deliver during the 11:00AM - 1:00PM time frame with enough advance notice prior to delivery date. GBCI staff will assist the one delivery driver with delivery of oven. Loading Dock Delivery with Ground Floor staging area forty feet from dock. Delivered in Broken-down form (6'9"H x 11'6"W x 2'2"D) to allow crates to pass through a "6'11"H x 3'10.5"W doorway. Contractor will be allowed to use Corrections owned transport and handling equipment, including a fork-lift, at time of delivery. Staging area has a DOC dumpster available for disposal of packing materials and crates. Contractor installation within two-weeks of delivery date, but installation started on date of delivery preferred. Contractor provides one Installation Supervisor, who provides installation services with own tools while supervising operation. Two (or more) qualified GBCI staff will install the oven with Corrections owned tools. Installation can be scheduled Mon - Fri during the hours of 7:00AM-7:00PM. Work can be scheduled on Saturday if needed to prevent contractor’s need for a return-trip to GBCI. Installation barrier walls, needed to minimize dust movement, provided by GBCI. Utility connections will be performed by Corrections staff (must be completed before mechanical start-up and equipment demonstration). No old equipment removal needed. Mechanical Start up service and One (1) Equipment Demonstration required. Detail on Equipment Being Bid Unit QTY Manufacturer: 1 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ Item # / RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Location ITEM 3 PDCI Alto-Shaam Model No. CTP20-20G Combitherm CT PROformance Combination Oven/Steamer, Natural Gas, boiler-free, floor model with roll-in cart, Cart with capacity of (20) full-size sheet pans or two deep (40) full-size hotel or GN 1/1 pans, Cart with (20) non-tilt support rails, (2) side racks, PROtouch Control with steam/convection/combination steam with convection/ and retherm cooking modes, programmable cool-down, SafeVent steam venting, single point removable probe, multi-shelf timers, auto reversing fan with five (5) different fan speeds expands cooking capabilities from braising, roasting to air flow sensitive products like meringues, Combi Clean PLUS with five (5) cleaning levels, CoolTouch3 triple pane glass window, door hinged right, high efficiency LED lighting, stainless steel construction, 18 gauge seamless stainless steel welded interior cavity, Six (6) adjustable stainless steel flanged legs, EcoSmart technology for reduced energy and water consumption, Combi Oven/Steamer Unit, without CombiSmoker option (standard) 120V, 60HZ, 1 Phase, 13.6 AMPS, 1.7kW, 14 AWG , NO cord or plug (standard) cULus, CE, and UL ANSI/NSF 4 listed, IP X5, Gastec Correctional/Prison Security device Base Package with Tamper-Proof Screws, without probe. 5017145 Control Panel Security Cover Anti-entrapment device 5017148 Correctional Institution Roll-in Pan Cart, 20 support rails, stainless steel construction, four (4) casters, and two (2) casters are locking. Standard manufacturer's one-year warranty. Date of delivery must be coordinated with the Facility Food Service Administrator. Monday-Friday deliveries available between 8:00-11:00AM and 1:00-4:00PM. Other arrangements can be made with enough advance notice. Loading Dock Delivery, Oven unpacked, set in place, and all packaging removed from DOC Grounds for disposal by contractor. Must pass through a 62”W x 79”H doorway from loading dock to kitchen. No old equipment removal needed. Contractor to provide oven installation by a licensed service provider between the hours of 8:00AM-4:00PM on the day of delivery. All utilities are in place at facility for installation. Detail on Equipment Being Bid Unit QTY Manufacturer: 1 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ Item # / Location ITEM 4 RCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Alto-Shaam Model No. CTP20-20G Combitherm CT PROformance Combination Oven/Steamer, Natural Gas, boiler-free, floor model with roll-in cart, Cart with capacity of (20) full-size sheet pans or two deep (40) full-size hotel or GN 1/1 pans, Cart with (20) non-tilt support rails, (2) side racks, PROtouch Control with steam/convection/combination steam with convection/ and retherm cooking modes, programmable cool-down, SafeVent steam venting, single point removable probe, multi-shelf timers, auto reversing fan with five (5) different fan speeds expands cooking capabilities from braising, roasting to air flow sensitive products like meringues, Combi Clean PLUS with five (5) cleaning levels, CoolTouch3 triple pane glass window, door hinged right, high efficiency LED lighting, stainless steel construction, 18 gauge seamless stainless steel welded interior cavity, Six (6) adjustable stainless steel flanged legs, EcoSmart technology for reduced energy and water consumption, Combi Oven/Steamer Unit, without CombiSmoker option (standard) 120V, 60HZ, 1 Phase, 13.6 AMPS, 1.7kW, 14 AWG , NO cord or plug (standard) cULus, CE, and UL ANSI/NSF 4 listed, IP X5, Gastec Correctional/Prison Security device Base Package with Tamper-Proof Screws, without probe. 5017145 Control Panel Security Cover 5017148 Correctional Institution Roll-in Pan Cart, 20 support rails, stainless steel construction, four (4) casters, and two (2) casters are locking. Standard manufacturer's one-year warranty. Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries available between 8:00 - 11:00AM and 1:00 - 4:30PM. Other arrangements can be made to deliver during the 11:00AM - 1:00PM time frame with enough advance notice prior to delivery date. Oven unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. Contractor to provide oven installation by a licensed service provider on the day of delivery. All Utilities are in place at facility for installation. No old equipment removal needed. Detail on Equipment Being Bid Unit QTY Manufacturer: 1 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ Item # / Location RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Detail on Equipment Being Bid Unit QTY Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ ITEM 5 SCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) Vulcan Model No. VC4ED Convection Oven Convection Oven standard features, Electric, One-deck, standard depth, solid state controls, Sixty minute timer with audible alarm, 25-3/4" high legs, no casters. Bid price without casters. 1/2 HP two-speed oven blower-motor. Oven cool switch for rapid cool down. Stainless steel front-top and sides, Five (5), nickel plated oven racks with eleven (11) rack positions. Two (2) solid stainless steel doors without windows. 480V, 60Hz, 3 Phase, 15AMPS, 12.5kW electrical specifications NSF, UL and C UL Listed Complete Prison Security Package (exterior security screws, perforated stainless steel hinged control covers with locking for pad lock, oven door lock for pad lock, topbottom and rear screen enclosure). Locks are not needed and aren't included in the Security Package. Standard manufacturer's one-year warranty. Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries and installation available between 8:00 - 11:00AM and 1:00 - 4:30PM. Other arrangements can be made to deliver during the 11:00AM - 1:00PM time frame with enough advance notice prior to delivery date. Oven unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. All Utilities are in place at facility for installation. No old equipment removal needed. Manufacturer: 1 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? Item # / Location ITEM SPECIFICATIONS & SERVICE NEEDS Detail on Equipment Being Bid Unit QTY Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ ITEM 6 WCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) Alto-Shaam Model No. CTP20-20G Combitherm CT PROformance Combination Oven/Steamer, Natural Gas, boiler-free, floor model with roll-in cart, Cart with capacity of (20) full-size sheet pans or two deep (40) full-size hotel or GN 1/1 pans, Cart with (20) non-tilt support rails, (2) side racks, PROtouch Control with steam/convection/combination steam with convection/ and retherm cooking modes, programmable cool-down, SafeVent steam venting, single point removable probe, multi-shelf timers, auto reversing fan with five (5) different fan speeds expands cooking capabilities from braising, roasting to air flow sensitive products like meringues, Combi Clean PLUS with five (5) cleaning levels, CoolTouch3 triple pane glass window, door hinged right, high efficiency LED lighting, stainless steel construction, 18 gauge seamless stainless steel welded interior cavity, Six (6) adjustable stainless steel flanged legs, EcoSmart technology for reduced energy and water consumption, Combi Oven/Steamer Unit, without CombiSmoker option (standard) 208-240V, 50-60HZ, 3 Phase, 9.6-8.4 AMPS, 2.0kW, 14 AWG , cULus, CE, and UL ANSI/NSF 4 listed, IP X5, Gastec With electrical cord and braided flexible gas line with ball valve shut off. Food Grade water supply line. Manufacturer: 2 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Correctional/Prison Security device Package with Tamper-Proof Screws, without probe. 5017145 Control Panel Security Cover Anti-entrapment device Hasp door lock (padlock not included) Delivery Timeline ARO: 5017148 Correctional Institution Roll-in Pan Cart, 20 support rails, stainless steel construction, four (4) casters, and two (2) casters are locking. Energy Star Rebate Standard manufacturer's one-year warranty. Amount Available: Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries and installation available between 7:45AM- 9:00AM and 12:45PM-2:00 PM. Loading Dock Delivery, Oven unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. Must pass through a Four-foot wide doorway from loading dock to kitchen. No old equipment removal needed. Contractor to provide oven installation by a licensed service provider on the day of delivery between 7:45 AM- 9:00 AM and 12:45PM-2:00PM. All Utilities are in place at facility for installation. Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? COMPANY (Bidder) NAME: ______________________________ Item # / Location RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Detail on Equipment Being Bid Unit QTY Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ ITEM 7 NLCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) Groen Tilting Steam Jacketed Kettles Model No. DH-80 Both Kettles have the same specifications which are the following: Kettle standard features, Natural Gas, 80-gallon capacity, crank tilt, 2/3 jacket, 316 stainless steel liner, floor mounted control console supports, stainless steel construction, flanged feet, electronic ignition, 50 PSI, 0-2000" elevation on standard model. Kettle has a self-contained steam source with electronic ignition. Elevo-2000 for elevation between 0-2000' (precise part number for this option to be assigned by manufacturer at time of order) 2" Tangent draw-off (TDO) #150601, 80-gallon Hinged Cover Kit (No. 51) for DH-80 #078701 Faucet, double pantry with swing spout. 150,000 BTU firing rate, NSF Listed, ASME code constructed for 50 PSI and CSA(AGA) design certified 115V, 60HZ, 1 Phase, 5.0 AMPS Prison package. Standard manufacturer one year warranty. Standard manufacturer ten year kettle & body warranty Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries available between 8:00AM- 3:00PM. Loading Dock Delivery, Kettle unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. Contractor to provide kettle installation by a licensed service provider on the day of delivery. Installation can be completed between Mon - Fri 7:45AM - 4:30PM. All Utilities are in place at facility for installation. No old equipment removal needed. Manufacturer: 2 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided? COMPANY (Bidder) NAME: ______________________________ Item # / Location RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) ITEM SPECIFICATIONS & SERVICE NEEDS Detail on Equipment Being Bid Unit QTY Unit Bid Price Extended Item Total COMPANY (Bidder) NAME: ______________________________ ITEM 8 RGCI RFB #CO-4633 REVISED Cost Sheet (Rev. 5/13/2014, with revisions in green font color) Groen Tilting Steam Jacketed Kettles Model No. DH-80 Both Kettles have the same specifications which are the following: Kettle standard features, Natural Gas, 80-gallon capacity, crank tilt, 2/3 jacket, 316 stainless steel liner, floor mounted control console supports, stainless steel construction, flanged feet, electronic ignition, 50 PSI, 0-2000" elevation on standard model. Kettle has a self-contained steam source with electronic ignition. Elevo-2000 for elevation between 0-2000' (precise part number for this option to be assigned by manufacturer at time of order) 2" Tangent draw-off (TDO) #150601, 80-gallon Hinged Cover Kit (No. 51) for DH-80 #078701 Faucet, double pantry with swing spout. 150,000 BTU firing rate, NSF Listed, ASME code constructed for 50 PSI and CSA(AGA) design certified 115V, 60HZ, 1 Phase, 5.0 AMPS Prison package. Standard manufacturer one year warranty. Standard manufacturer ten year kettle & body warranty Date of delivery must be coordinated with and approved by the Facility Food Service Administrator. Monday-Friday deliveries available between 8:00AM- 3:00PM. Loading Dock Delivery, Kettle unpacked, set-in place, and all packaging removed from DOC Grounds for disposal by contractor. Contractor to provide kettle installation by a licensed service provider on the day of delivery. Installation can be completed between Mon - Fri 7:45AM - 4:30 PM. All Utilities are in place at facility for installation. No old equipment removal needed. Manufacturer: 2 EA Model: Warranty(s) Available: Extended Warranty/Maintenance Service Available: Price of Extended Warranty/Maintenance Service (Do NOT include in your bid price for this equipment): Delivery Timeline ARO: Energy Star Rebate Amount Available: Is Installation an option on day of delivery? If not, when after product delivery can the installation be provided?