Preview only show first 10 pages with watermark. For full document please download

050-123 - Glenair

   EMBED

Share

Transcript

050-123 PRODUCT BRIEF Copper to Fiber Single Channel Ethernet Media Converter 10/100/1000BASE-T to Single Fiber 1310/1550 Bidirectional Optical Ethernet 28VDC M38999 (Signal), M38999 (Power), M38999 (Fiber Optic) REV DESCRIPTION DATE APPROVED 2 Preliminary 01/07/2016 RAS/MF 3 Add ECCN 05/26/2016 RAS 4 Update Absolute Maximum Voltage 01/10/2017 RAS/GC 5 Add Flow Control Option 04/04/2017 RAS/GC 6 Update Copyright date 05/26/2017 GC BF15U2-2570 THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC. 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet 10/100/1000BASE-T to Single Fiber Bidirectional Optical Ethernet The Glenair 050-123 is an Ethernet Copper to Fiber media converter that supports 10/100/1000BASE-T copper input/output and can be configured to support 100Mbps or 1000Mbps Bi-directional fiber optic links that allows full duplex communication over a single fiber optic link. The media converter can be configured as either 1310nm Transmitter and 1550 nm Receiver…or as 1550nm Transmitter and 1310nm Receiver. It is designed for harsh environments and incorporates electronics in an environmentally sealed enclosure that incorporates three environmental M38999 connectors. The Glenair Ethernet media converter enables reliable communications over longer distances in harsh environment applications. It extends network link distances between switches, routers, and other Ethernet peripherals. It converts 10/100/1000BASE-T data from twisted pair copper cable to 100BASE or 1000BASE fiber optics.. This allows legacy equipment running at 10/100/1000BASE-T to be connected to newer networks, and provides a smooth upgrade path. KEY FEATURES/BENEFITS  1310nm & 1550nm FP Lasers  1310nm DFB Lasers for 1000BASE-EX  InGaAs PIN PD for 1Gbps and 100Mbps  Wide Input Voltage Range: 12-36V  Electrical Interface compliant with IEEE 802.3 (10/100/1000BASE-T)  Optical Interface compliant with IEEE 802.3 (1000BASE-LX10 or 1000BASE-SX)  Option to implement Flow Control ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY    -40°C to +85°C operating temperature range MIL-STD-810 Mechanical Shock and Vibration Magnetics on the electrical signal input side to support 10/100/1000BASE-T operation over 100m Cat 5E  IP67 in mated condition  M38999 Rugged connectors for Signal, Power & Fiber  Panel Mount & Flange Mount Options APPLICATIONS  Harsh Environment such as: Airborne, Tactical, Railway, Industrial, Oil and Gas and Shipboard applications US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 2 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Functional Block Diagram SINGLE CHANNEL SINGLE FIBER MEDIA CONVERTER Note: Fiber Optic Channels can be specified for 100Mbps or 1Gbps data rates and the Transmitter and Receiver wavelengths can be either 1310nm or 1550nm Versions:     100T13R15: Operates at 125Mpbs line rate (100 Mbps data rate), 1310nm Transmitter & 1550nm Receiver 100T15R13: Operates at 125Mpbs line rate (100 Mbps data rate, 1550nm Transmitter & 1310nm Receiver 1000T13R15: Operates 1.25Gbps line rate (1000 Mbps data rate), 1310nm Transmitter & 1550nm Receiver 1000T15R13: Operates 1.25Gbps line rate (1000 Mbps data rate), 1550nm Transmitter & 1310nm Receiver Other Fiber Optic connections are possible – Contact Factory ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 3 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Flow Control Ethernet flow control is a mechanism for temporarily stopping the transmission of data on Ethernet computer networks. If data flow between the two devices connected to the media converter will vary in rate, it is up to the end user to ensure their higher speed devices are throttled correctly to ensure loss of data does not occur over time. Flow control can be enabled at the factory if so desired. Contact the factory for more details. ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 4 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Connectors Insert Arrangement NAME Function Fiber Optic Signal Connector J1 D38999 Series III MIL-STD-1560 Arrangement 19-11 (Mating face - PIN insert shown) Power Connector J2 D38999 Series III MIL-STD-1560 Arrangement 9-35 (Mating face - PIN insert shown) Electrical Ethernet Signal Connector J3 D38999 Series III MIL-STD-1560 Arrangement 11-35 (Mating face - PIN insert shown) Media Converter Connector Mating PLUG Connector D38999 Series III type D38999 Series III type 180-091#S7-19-11SN (D38999/20WF11SN) 180-091#06-19-11PN (D38999/26WF11PN type) SOCKET TERMINUS PIN TERMINUS 181-001-125 (M29504/5-4237) 181-002-125 (M29504/4-4208) D38999 Series III type D38999 Series III type 233-105-00#09-35PN (D38999/20WA35PN) 233-105-G6#09-35SN (D38999/26WA35SN) PIN CONTACTS SOCKET CONTACTS 850-002-22-360 (M39029/58360) 850-002-22-348 (M39029/56348) D38999 Series III type D38999 Series III type 233-105-00#11-35PN (D38999/20WB35PN) 233-105-G6#11-35SN (D38999/26WB35SN) PIN CONTACTS SOCKET CONTACTS 850-002-22-360 (M39029/58360) 850-002-22-348 (M39029/56348) Note: # = Environmental Class (Material/Finish) ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 5 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Ratings and Specifications – 1000 Mbps Versions ABSOLUTE MAXIMUM RATINGS Parameter Symbol Min Storage Temperature Ts Supply Voltage Typ Max Units -55 +100 °C Vcc -0.5 40 V Symbol Min Max Units Operating Temperature Top -40 +85 °C Supply Voltage Vcc 12 28 36 V Supply Current Icc 70 110 mA Notes 1 second maximum, 40V OPERATING CONDITIONS Parameter Typ Notes @28VDC OPTICAL CHARACTERISTICS – TRANSMITTER Parameter Symbol Min Typ Max Units Notes Optical Output Power, POUT -9 -5 -2 dBm Fabry-Perot, 1.25Gbps Optical Wavelength, 1000T13R15 λOUT 1260 1310 1360 nm Optical Wavelength, 1000T13R15 λOUT 1500 1550 1600 nm 3.5 nm Max Units Δλ Spectral Width OPTICAL CHARACTERISTICS – RECEIVER Parameter Minimum Detectable Signal (Ethernet) Min. Sensitivity, BER Overload, BER 10-12, 10-12, PRBS PRBS 2-7-1 2-7-1 Symbol Min MDS -22 Typ -1 PIN_MIN -22 Notes 1.25 Gbps -22 -1 dBm Optical Wavelength, 1000T13R15 PIN_MAX λIN 1250 1370 dBm nm Optical Wavelength, 1000T15R13 λIN 1490 1610 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Gigabit Ethernet, IEEE 802.3ab, 10/100/1000BASE-T TIA/EIA-568-B Cat 5E 100m Derived from Gigabit Ethernet, IEEE 802.3z Single Mode Fiber 4km ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com (9/125µm) REV: 6 ∙ 1211 AIR WAY Notes Wavelength Ranges are not compatible with 1000BASE-BX10 US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 6 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Ratings and Specifications – 100 Mbps Versions ABSOLUTE MAXIMUM RATINGS Parameter Symbol Min Storage Temperature Ts Supply Voltage Typ Max Units -55 +100 °C Vcc -0.5 40 V Symbol Min Max Units Operating Temperature Top -40 +85 °C Supply Voltage Vcc 12 28 36 V Supply Current Icc 70 110 mA Notes 1 second maximum, 40V OPERATING CONDITIONS Parameter Typ Notes @28VDC OPTICAL CHARACTERISTICS – TRANSMITTER Parameter Symbol Min Typ Max Units Notes Optical Output Power, POUT -9 -5 -2 dBm Fabry-Perot, 125 Mbps Optical Wavelength, 1000T13R15 λOUT 1260 1310 1360 nm Optical Wavelength, 1000T13R15 λOUT 1500 1550 1600 nm 3.5 nm Max Units Δλ Spectral Width OPTICAL CHARACTERISTICS – RECEIVER Parameter Minimum Detectable Signal (Ethernet) Min. Sensitivity, BER Overload, BER 10-12, 10-12, PRBS PRBS 2-7-1 2-7-1 Symbol Min MDS -22 Typ -1 PIN_MIN -29 Notes 125 Mbps -26 -1 dBm Optical Wavelength, 1000T13R15 PIN_MAX λIN 1250 1370 dBm nm Optical Wavelength, 1000T15R13 λIN 1490 1610 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Gigabit Ethernet, IEEE 802.3ab, 10/100/1000BASE-T TIA/EIA-568-B Cat 5E 100m Derived from Gigabit Ethernet, IEEE 802.3z Single Mode Fiber 10km ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com (9/125µm) REV: 6 ∙ 1211 AIR WAY Notes Will operate with 100BASE-BX10 transceivers but care must be taken to ensure that optical power to the 100BASE-BX10 units are not exceeded. US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 7 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Ratings and Specifications - (continued) COMPLIANCE SPECIFICATIONS CHARACTERISTIC Standard Condition Mechanical Shock MIL-STD-810G 40g Mechanical Vibration MIL-STD-810G 30 grms MIL-STD-883 Class II 2200V HBM MIL-STD-461F CE101 28V MIL-STD-461F CE102 28V MIL-STD-461F CS101 28V MIL-STD-461F CS106 28V MIL-STD-461F CS109 28V MIL-STD-461F CS114 28V MIL-STD-461F RS101 28V MIL-STD-461F RS103 28V MIL-STD-461F RE101 28V MIL-STD-461F RE102 28V MIL-DTL-38999/20 500 Cycles ESD Conducted Emissions, Power Leads, 30 Hz to 10 kHz Conducted Emissions, Power Leads, 10 kHz to 10 MHz Conducted Susceptibility, Power Leads, 30 Hz to 150KHz Conducted Susceptibility, Transients, Power Leads Conducted Susceptibility, Structure Current, 60 Hz to 100 kHz Conducted Susceptibility, Bulk Cable Injection, 10 kHz to 200 MHz Radiated Susceptibility, Magnetic Field, 30 Hz to 100 kHz Radiated Susceptibility, Electric Field, 2 MHz to 18 GHz Radiated Emissions, Magnetic Field, 30 Hz to 100 kHz Radiated Emissions, Electric Field, 10 kHz to 18 GHz Mating Durability Flame Resistance EIA364-104 Damp Heat MIL-STD-810G Eye Safety CDRH and IEC-825 ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY Notes 6-9 ms pulses 30 seconds 120 hours Class 1 Laser Product US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 8 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet Ratings and Specifications - (continued) Material/Finish Item Housing & Connector Shell Plating Finish: M Plating Finish: MT Plating Finish: NF Contacts Material/Finish Aluminum Nickel Nickel PTFE Olive Drab Cadmium Copper alloy, 50 μInch gold plated D38999 Inserts Thermoplastics Interfacial Seals, 38999 only Elastomer, Fluorosilicon Optical Ferrules & Sleeves Zirconia, Ceramic Insulators Contact retention clip Seal, O-rings Seal Spring PC tail contacts PCB flex Encapsulant Solder type Liquid crystal polymer (LCP) Beryllium copper alloy Fluorosilicone rubber Silicone elastomer Nickel-plated beryllium copper Copper alloy/gold plated FR4 & Polyimide HYSOL RoHS compliant Sn95/Sb5 (232°C melting temp) & RoHS compliant Sn96.5/Ag3.0/Cu0.5 (217° melting) Material/Finish ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 9 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet OUTLINE DRAWING -01 (PANEL MOUNT) Dimensional Tolerances Unless specified otherwise: 0.x ± 0.1” 0.xx ± 0.03” 0.xxx ± 0.015” Marking Assembly is identified with Manufacture’s Name, Cage Code, Part Number, Date Code and Serial Number in approximate location shown OUTLINE DRAWING (Continued) ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 10 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet -02 (FLANGE MOUNT) Dimensional Tolerances Unless specified otherwise: 0.x ± 0.1” 0.xx ± 0.03” 0.xxx ± 0.015” Marking: Assembly is identified with Manufacture’s Name, Cage Code, Part Number, Date Code and Serial Number in approximate location shown Weight: Mechanical Configuration Weight (lbs) -01 (Panel Mount) 0.553 nominal -02 (Flange Mount) 0.553 nominal Connectors will be covered with protective caps at time of shipment Please contact Glenair for other configurations PANEL CUT OUT ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 11 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected] 050-123 PRODUCT BRIEF Copper to Fiber Single Fiber Ethernet Media Converter 10/100/1000BASE-T to Bidirectional Fiber Optic Ethernet RECOMMENDED PANEL CUT OUT – J1 Max Panel Thickness 0.250” ©2015 Glenair, Inc. GLENAIR, INC. www.glenair.com REV: 6 ∙ 1211 AIR WAY US Cage Code 06324 ∙ GLENDALE, CA 91201-2497 PAGE 12 of 12 Printed in USA ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912 E-mail: [email protected]