Preview only show first 10 pages with watermark. For full document please download

065-82lr10g10km Xfp 10 Gigabit Lr 10 Kilometer Span Interface Module `

   EMBED


Share

Transcript

` Network Connectivity Systems 065-82LR10G10KM XFP 10 Gigabit LR 10 kilometer Span Interface Module The Signamax 065-82SR10G10KM is a XFP (10 Gigabit Small Form Factor Pluggable) singlemode fiber module that supports 10 Gigabit Ethernet over singlemode fiber cable at distances up to 10 kilometers. It adheres to the IEEE 802.3ae standard for 10 Gigabit Ethernet over singlemode fiber at 1310 nm, and is a costeffective method of providing changeable 10 Gigabit Ethernet singlemode interfaces to switches and media converters equipped with a standard XFP slot. Applications • • • • • High-speed storage area networks. Computer cluster cross-connections. Custom high-speed data pipes. 10GE Storage, 8G Fiber Channel. Inter-rack connection. Key Features • 10 Gbps serial optical interface, compliant with the IEEE 802.3ae 10GBaseLR standard. • Electrical interface compliant with XFP Multi-Source Agreement specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable modules. • 1310 nm uncooled DFB LD transmitter. • 2-wire interface for management specifications is compliant with SFF-8472 digital diagnostic monitoring interface specifications for optical transceivers. • Operating temperature: 0°C to 70°C. • All-metal housing for superior EMI performance. • Low power consumption. • Advanced firmware allows customer system encryption information to be stored in the transceiver. • Cost effective XFP solution, enables higher port densities and greater bandwidth. Ordering Information Part Number Description 065-82LR10G10KM 10GBaseLR XFP Module 1310 nm – SM/LC, 10 kilometers Summary Specification PART NUMBER 065-82LR10G10KM Model / Spectrum Light Source LR 1310 nm DFB LD Link Power Budget 6 dBm Typical Max. Distance** Supply Voltage Operating Temp. 10 kilometers 3.3 V 0 ~ 70 °C Blue Clasp ** Maximum distances attainable on singlemode fiber circuits are dependent upon a circuit’s conditions; i.e., the number of splices and patch panels and the number of bends in the circuit path. For comparison with competing products, please use the Link Power Budget for meaningful comparisons. www.signamax.com 999 N.W. 195th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2013 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 065-82LR10G10KM 02192013 Network Connectivity Systems DETAILED SPECIFICATIONS • APPLICABLE STANDARDS IEEE 802.3ae (10GBaseLR 10 Gigabit Ethernet) • 10GBaseLR (10.3125 Gbps) • 10GBaseLW (9.953 Gbps) • ABSOLUTE MAXIMUM RATINGS Storage Temperature: TS −40° C -- 85° C Supply Voltage: VccT / VccR -0.5 – +3.6 V Input Voltage: VIN -0.5 – +3.6 V Operating Humidity: 0-85 % • RECOMMENDED OPERATING CONDITIONS PARAMETER Ambient Operating Temperature Supply Voltage Data Rate Power Consumption SYMBOL MIN TAMB 0 Vcc 3.135 9.953 TYPICAL 3.3 MAX UNITS 70 °C 3.465 10.3125 700 V Gbps ma • TRANSMITTER ELECTRO-OPTICAL CHARACTERISTICS Vcc = 3.135 V to 3.465V, TA = 0 °C to 70 °C PARAMETER SYMBOL MIN TYP. Center Wavelength λt 1290 1310 Spectral width dl SMSR SMSR 30 Average Optical Power Po -8 Disabled Power Poff Extinction Ratio ER 6 Minimum OMA (10 Gig Ethernet) OMA 0.2 Minimum OMA-TDP (10 Gig OMAtdp 6.2 Ethernet) Eye Mask 1 (SONET/SDH) Eye Mask 2 (10 Gig Ethernet) Generation Jitter 1 (20kHz - 80MHz) Generation Jitter 2 (4MHz - 80MHz) RIN Chromatic Dispersion (SONET/SDH) Operating Distance (10G Ethernet) Attenuation (SONET/SDH) Channel Insertion Loss (10G Ethernet) Maximum DGD (SONET/SDH) NOTE MAX 1330 1 0 -30 - UNITS nm nm dB dBm dBm dB dBm NOTE - dBm 3 GR-253-CORE/ITU-T G.691 IEEE 802.3ae 2 2 2 3 2 3 - 0.15 UIp-p 2 - 0.1 UIp-p 2 RIN - -128 dB/Hz CD - 6.6 ps/nm 10 km 0 4 dB 0 6 dB 30 ps DGD Notes: 1. Data rate tolerance - IR-2/S-64.2b,10GBASE-EW:typ.+/-20ppm - 10GBASE-ER: typ.+/-100ppm 31 2. Measured at 10.3125Gbps, Non-framed PRBS2 -1, NRZ 3. Measured by using Intel’s XFP evaluation board. www.signamax.com 999 N.W. 195th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2013 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 065-82LR10G10KM 02192013 DETAILED SPECIFICATIONS (continued) • RECEIVER ELECTRO-OPTICAL CHARACTERISTICS Vcc = 3.135 V to 3.465 V, TA = 0 °C to 70 °C PARAMETER SYMBOL MIN TYP. MAX Operating Data Rate 9.95 10.70 Input Center Wavelength lrc 1260 1565 Overload Rovl 0.5 Minimum Sensitivity Pmin -14 -11 Sensitivity in OMA OMA0 -12.6 Stressed Sensitivity in OMA -10.3 OMAst RX_LOS Assert Level RLOSa -30 -25 RX_LOS Deassert Level RLOSd -22 RX_LOS Hysteresis RLOSh 1 5 Optical Path Penalty PN 1 Optical Return Loss ORL 14 GR-253-CORE/ITU-T G.783 JTL Jitter Tolerance Notes: 1. Data rate tolerance - IR-2/S-64.2b,10GBASE-EW:typ.+/-20ppm - 10GBASE-ER: typ.+/-100ppm 31 2. Measured at 10.3125Gbps, Non-framed PRBS2 -1, NRZ 3. Measured by using Intel’s XFP evaluation board. UNITS Gb/s nm dBm dBm dBm dBm dBm dBm dBm dB dB NOTE 1 2 3 3 1 • DIMENSIONS (mm) www.signamax.com 999 N.W. 195th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2013 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 065-82LR10G10KM 02192013 DETAILED SPECIFICATIONS (continued) • REGULATORY COMPLIANCE Feature Electrostatic Discharge (ESD) to optical connector Immunity Test Method Variation of IEC 61000-4-2 Electromagnetic Interference (EMI) FCC Class B CENELEC EN55022 Class B (CISPR 22A) FDA21 CFR 1040.10 and 1040.11 Laser Eye Safety Variation of IEC 61000-4-3 Performance Typically withstand at least 15kV without damage when port is contacted by Human Body Model probe. Typically show no measurable effect from a 10 V/m field swept from 27 MHz to 1 GHz applied to the transceiver without a chassis enclosure. Margins are dependent on customer board and chassis design. Class 1 Laser Safety product. • WARRANTY Lifetime www.signamax.com 999 N.W. 195th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2013 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 065-82LR10G10KM 02192013