Transcript
Issue Date: 01-2016
Prospex® Plus Colour Pinhole Trimmed accent downlight for LED50
093+13‐C-LED-TR
Recessed fixed pinhole downlights with lined aperture for glare control for Lucent LED50 modules. Seperate die cast installation kit Die cast aluminium construction. Trimless and fixed versions available Various coloured options available for the baffle. Deep regressed lamp for minimal glare. IP44 as standard Gear driven tilt and rotation. Hot aiming simplifies focussing while lamp is on. Aiming remains locked in focus throughout re lamping.
Lamp quantity Lamp Lamp holder Lamp wattage Adjustable Aperture Overall dimension Overall height Required depth First fix requirement* Ceiling cut out Ceiling thickness Ingress protection** Dimming options***
1 LED 50 Family n/a 9-19w 45° 55mm Ø 112mm Ø 130mm 155mm MIN Yes 102 mm Ø 25mm MAX IP44 Phase/DALI/1-10v
Cut out 102mmØ
SN - Satin Nickel CH - Chrome
www.lucent-lighting.com
SG - Satin Gold CP - Polished Copper
Ref Number: 093+13-C‐LED-TR-XX‐WH 093+13-C‐LED-TR-XX‐BK
BZ - Bronze
White (RAL 9010) Black (RAL 9005)
*First Fix requirement. Luminaire comprised of fixture body with separate ceiling trim and installation kit, which is to be fitted into the ceiling once finished. Ensure correct alignment of the installation kit before final assembly (see luminaire installation instructions for details). **IP Rating. Tested from underside of the ceiling. ***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or
withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e:
[email protected] t: +44 (0)20 8442 0880
Fitting Ref
Europe
China
Quantity
Russia
Lucent LED50 Range Lucent's own range of 50mm diameter LED modules including the LED50 >80CRI and LED50-PLUS >90CRI, LED50-SEVEN, LED50-Ambiance Warm Dim, all utilising Cree XP-E2 white LED's, and LED50-ONE based on Citizen COB technology. Please refer to luminaire Specification sheet for maximum lumen output that can be used within the fixture.
LED50
LED50 Gen 2 80CRI Module LED50 Gen2 Order Code LED Colour 2700K 27 3000K 30 4000K 40 Module Type LED50/2
LED50 module, RA > 80CRI using 9 x Cree XP-E2 LEDs A choice of 3 colour temperatures 2700/3000/4000K & 3 Optic angles 18/22/36°. Max Drive current 500mA, can be under run if required. Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting. Module with on-board protection against surge and reverse polarity.
Example
Optic Angle 18 18° 22 22° 36 36°
LED50/2- 30- 22
LED50 Plus Gen 2 90CRI Module LED50 PLUS Gen2 Order Code LED Colour 2700K 27 3000K 30 4000K 40 Module Type LED50/2
LED50 Plus module, RA > 90CRI using 9 x Cree XP-E2 LEDs A choice of 2 colour temperatures 2700/3000 & 3 Optic angles 18/22/36°. LED50 Plus Gen 2 90CRI Module Max Drive current 500mA, can be under run if required. Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting. Module with on-board protection against surge and reverse polarity.
Example
Optic Angle 18 18° 22 22° 36 36° CRI 90 90CRI
LED50/2- 30- 22- 90
LED50 SEVEN 80CRI Module LED50 Spot module, RA > 80CRI using 7 x Cree XP-E2 LEDs A choice of 3 colour temperatures 2700/3000/4000K in a narrow 12° spot optic and 2 complimentary optics. Max Drive current 700mA, can be under run if required. Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting.
LED50 Seven Order Code LED Colour
2700K 3000K 4000K
Optic Angle 12 12° 22 22° 36 36°
27 30 40
Module Type LED57
Example
LED57 30- 22
LED50 Ambiance WarmDim
www.lucent-lighting.com
LED50 Ambiance WarmDim Order Code LED Colour Optic Angle 2700K 27 12 12° 3000K 30 22 22° 36 36° Module Type LED50WD
LED50 Ambiance Warm Dim, RA > 80CRI using 6 x Cree XP-E2 & 1 x XT-E LEDs A choice of 2 main colour temperatures 2700/3000 dimming to 2200K. Available in 3 optic angles 19/22/36° Drive current 700mA, Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting.
Example
LED50WD- 30- 22
LED50 ONE 80CRI Module LED50 ONE, RA > 80CRI using 1 x Citizen COB LED. A choice of 3 colour temperatures 2700/3000/4000K with a single optic in two beam angles 24/38°. Max Drive current 350mA, can be under run if required. Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting.
LED50 ONE Order Code LED Colour 2700K 27 3000K 30 4000K 35 Module Type LED51
Example
* Separate die cast plaster in kit for plaster ceilings. ** Tested from ceiling underside. To specify IP54; add '-IP' to end of code. policy of Lucent Lighting to continually review and its productsordered/specified). and therefore reserve the right to change any details of product or It is the *** Dimming options depend on driver (to improve be separately withdraw specifications without prior notice. Some control methods may require additional cabling
LED51-
Optic Angle 24 24° 38 38°
30- 38
Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the described above and to this document are owned or licensed to Lucent Lighting UK Ltd. Lucent reserve the right to change anyproduct details, dimensions colours etc without priorbynotice. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE
Job/Project Name
Area/Location
Contact Lucent Lighting: e:
[email protected] t: +44 (0)20 8442 0880
Fitting Ref
Quantity
