Transcript
Fastener Kit Comprises 10 x M6 cage nuts and screws and is used for all accessories. 11180025
Multipurpose base allows 600mm or 800mm deep cabinets to be mounted 80mm off the floor to allow cable access under the cabinet frame. Multipurpose Base - 600 x 600, 19" Coke 11180108 Multipurpose Base - 600 x 800, 19" Coke 11180109 Multipurpose Base - 700 x 800, 23" Coke 11180110
Multipurpose Base Wheels Combining a multipurpose base with this heavy duty wheel set provides mobility for an E, Q or M cabinet, regardless of height. 11180111
Timber U Base The timber bases allow 600mm or 800mm deep cabinets to be mounted 50mm off the floor to allow cable access under the cabinet frame. Timber U Base 600 11820003 Timber U Base 800 11180027
Timber Pedestals The timber bases allow 600mm or 800mm deep cabinets to be mounted 50mm off the floor to allow cable access under the cabinet frame. The pedestal also provides a covered cable way across the floor to the cabinet. Timber Pedestal - 600 11820004 Timber Pedestal - 800 11820006
MODEMPAK LIMITED 417A Church St P O Box 12525 Penrose Auckland, New Zealand
Phone: +64 9 526 1880 Freephone: 0800 663 367 Fax: +64 9 580 0606 Freefax: 0800 329 636 www.modempak.co.nz
Your Distributor is:
ww.modempak.co.nz
Multipurpose Base
Accessories
FOR MODEMPAK CABINETS
m
m
Accessories
FOR MODEMPAK CABINETS
Modempak provides a full range of cabinet accessories. These include power panels, fans, shelves, mobile and static bases and cable management accessories. All Modempak accessories come with sufficient cage nuts and screws for mounting the accessory.
Power Panels (Silver Grey) Horizontal 10 Outlets Horizontal 6 Outlets Horizontal 6 Outlets (Round Earth) Vertical 9 Outlets Vertical 18 Outlets
Two Fan Kit (Black) The 230V two fan kit can be mounted in any M, E, P (350mm or 450mm deep) or Q cabinet. It comes with a 2m cordset and a blanking plate and mounts under the vent in the cabinet’s top panel. 11920001
11290006 11290015 11290033 11290007 11290008
Four Fan Shelf (Silver Grey) The horizontal units mount in any 19" cabinet. A pair of 23" to 19" adaptor brackets are needed to mount the horizontal units in a 23" cabinet. The 11290007 mounts in any 19" or 23" E or Q cabinet. The 11290008 mounts in any 19" or 23" E or Q cabinet where the cabinet height is 1800mm or 2100mm. These units come with a 2m cordset and are equipped with 10A sockets and a 10A B Curve MCB.
The 230V four fan shelf can be mounted in any M, E or Q cabinet. It comes with a 2m cordset and mounts on the vertical shelf rails in the body of the cabinet. 11920006
Filter Panels Fan Filter 600 11280032 Fan Filter 800 11280034 Filter packs for vents on 600mm or 800mm deep cabinets respectively (M, E or Q). The 600 filters can be used on the 350mm and 450mm P cabinets.
Standard Shelves These shelves can be mounted in the E, Q or M cabinets and can support 45kg.
BT Communications Panel (Horizontal) 12 Outlets (Silver Grey) This unit mounts in any 19" cabinet. A pair of 23" to 19" adaptor brackets are needed to mount this unit in a 23" cabinet. 11290009
Shelf 19" 400mm (for 600mm deep cabinet) - Black Shelf 19" 400mm (for 800mm deep cabinet) - Black Shelf 19" 600mm (for 800/1000mm deep cabinet) - Black Shelf 23" 400mm (for 600/800mm deep cabinet) - Black Shelf 23" 600mm (for 800/1000mm deep cabinet) - Black
11820028 11820027 11280047 11820010 11820012
Accessories
FOR MODEMPAK CABINETS
Strengthened Shelves These shelves support 90kg and can be mounted in the E, Q or M cabinets. Strengthened Shelf 19" 400mm (for 600/800mm deep cabinet) – Black Strengthened Shelf 19" 600mm (for 800/1000mm deep cabinet) – Black Strengthened Shelf 23" 400mm (for 600/800mm deep cabinet) – Black Strengthened Shelf 23" 600mm (for 800/1000mm deep cabinet) – Black
11820020 11820041 11820022 11820038
Chimney - 1m high (Silver Grey) This bolts over the vent in the top panel of any of the cabinets. 11890005
Cantilever Shelves These shelves support 20 kg and can be installed in the E, Q, M and P cabinets plus the open patch racks. The 400mm shelves are not recommended for installation in P cabinets Shelf 150mm 1RU – Silver Grey 11380014 Shelf 273mm 2RU – Silver Grey 11380013 Shelf 400mm 3RU – Silver Grey 11380015 Shelf 400mm 3RU – Black 11380054 Shelf 310mm Mid Mount 2RU - Silver Grey 11380027
Keyboard Sliding Shelf (Silver Grey)
Shelf Rail Kit These rails are supplied with and mount vertically in the rear of the E cabinet and can be used for extra vertical rails in the E and P cabinets. Shelf Rail Kit 900 (18ru) 11820023 Shelf Rail Kit 1200 (25ru) 11820011 Shelf Rail Kit 1800 (38ru) 11820024 Shelf Rail Kit 2100 (45ru) 11820025
This is a cantilever shelf which can be installed in the E, Q, M and 450mm deep P cabinets plus the open patch racks. This shelf is 3RU high and can support 20kg.
Adaptor Brackets - 23" to 19" Sliding Shelves These shelves can be mounted in the E, Q or M cabinets. Sliding Shelf 19" 45kg 400mm (all cabinet depths) - Black 11820016 Sliding Shelf 23" 45kg 400mm (all cabinet depths) - Black 11820026 Sliding Shelf 19" 100kg 400mm (all cabinet depths) - Silver Grey 11820031
The adaptor brackets allow 19" rack mounted equipment, patch panels and cantilever shelves to be mounted in a 23" rack. Adaptor Bracket 2ru 23" to 19"- Gold Passivated 11180019 Adaptor Bracket 4ru 23" to 19"- Gold Passivated 11180020 Adaptor Bracket 10ru 23" to 19"- Gold Passivated 11180021 Adaptor Bracket 18ru 23" to 19"- Gold Passivated 11180022 Adaptor Bracket 38ru 23" to 19"- Gold Passivated 11180031 Adaptor Bracket 45ru 23" to 19"- Gold Passivated 11180032
Sliding Draw (Silver Grey) This draw can be mounted in the E, Q or M cabinets. It is 400mm deep, 2RU high and can support 45kg. 11820032
Cable Trays These cable trays mount vertically in the E, Q or P cabinets. Cable Tray 900mm - Perforated Sheet Steel Tray - Coke 11280001 Cable Tray 1200mm - Wire Tray - Silver Passivated 11280118 Cable Tray 1800mm - Wire Tray - Silver Passivated 11280120 Cable Tray 2100mm - Wire Tray - Silver Passivated 11280121
