Transcript
HDMI Extender over UTP Cable HDMI Extender over UTP Cable
Panel Diagram
Model:BA101HDMI
Transmitter
The HDMI Extender conforms with standard HDMI1.3,the transmission distance of HDMI signal extends up to 60m while using standard CAT cable. Featuring cost saving and simple installation, the device kit can be widely used in HD advertisement system, conferencing system, family entertainment and so on. Typical Application
D/
EV
D
itt sm an Tr
/5
E/
6
Ca
bl
e
2
r
Re
ce
ive
1
r
2
Receiver
ST up P ca to t5/ 60 5E m /6
ito
1
on
UT up P/S to TP 60 ca m t5
M
er
HD
M
IC
ab
le
DV
H
Power Supply Input
D M IC ab le
Note: 1: Port 1 should match port 1 . 2: Port 1 should use STP Cat5/5e/6 or better cable, port 2 can use UTP/STP Cat5/5e/6 or better cable. 3: Bad quality cable will affect transmission distance.
Package Contents Features
HDMI Transmitter
1piece
HDMI Receiver
1piece
Using standard CAT UTP cable, cost saving. Driving lossless signal up to 60m with innovative balanced driving technology. Conform with HDMI1.3,Compatible with HDCP1.2,Support CEC. Support 1080p/1080i、720p/720i、576p/576i、480p/480i etc. Audio format: DTS-HD/Dolby-trueHD/LPCM7.1/ DTS/Dolby-AC3/DSD. Excellent cable compatibility, support input cable and output cable up to
安装步骤 Installation Procedure 1. Please switch power off before installation, or else installation with power may damage relative devices. 2. Connect source of HDMI signal with input port of transmitter via a HDMI cable. 3. Connect the monitor with output port of receiver via a HDMI cable. 4. Connect port 1 of transmitter and receiver via STP CAT5/5E/6 cable.
15/20m respectively.
1
2
HDMI Extender over UTP Cable
HDMI Extender over UTP Cable
How to make RJ 45 Plug
Specification 连接接口
Instruments to be used: wire crimper, network tester. Description
Item Product
Function
Performance
Receiver
Signal Input
1Channel
Signal Output
1Channel
Transmission Distance(Max)
Powe Properties
Transmitter
30m(STP-Cat5e)
Voltage
Wire sequence of RJ45 plug should conform with EIA/TIA568A or 568B.
60m(STP-Cat6) 5V DC
<1W
Power Consumption
<3.5W
Support HDMI Version
HDMI 1.3
Support HDCP Version
HDCP1.2
HDMI Resolution
1080p/1080i/720p/720i/576p/576i/480p/480i
Support Color Format
24bit/dark 30bit/dark 36bit
Audio Format
DTS/HD/Dolby-tureHD/LPCM7.1/ DTS/Dolby-AC3/DSD
Max Transmission Speed
5.1Gbps
5Vp-p(TTL)
Input/output DDC Signal
PIN
Color
1
whtie/green
1
green
2
orange
white/orange
3
white/orange
3
whtie/green
4
blue
4
blue
5
white/blue
5
white/blue
Input Cable
≤15m (AWG26 HDMI 1.3 Cable)
Output Cable
≤20m (AWG26 HDMI 1.3 Cable)
6
orange
6
green
Transmission Cable
≤60m (STP CAT5/5E/6 Cable)
7
white/brown
7
white/brown
MTBF
>10000H
8
brown
8
brown
Size(LWH)
82*45*22mm
Outer Shell
Operation Temperature
Environmental Storage Temperature Relative Humidity
Specifications suject to change without notice.
82*45*22mm Iron Metal
Color N.W.
3
Color
2 0.5-1.5Vp-p(TMDS)
Input/output TMDS Signal
Physical Properties
RJ 45 PIN Diagram PIN
Audio Transmission Format Stereo Audio
Reliability
1. Shuck off about 2cm long the insulating layer, and bar the 4 pairs UTP cable. 2. Depart the 4 pairs UTP cable and straighten them. 3. Line up the 8 pieces of cables per EIA/TIA 568A or 568B. 4. Brunt cut the cables to leave 1.5cm bare wire. 5. Plug 8 cables into RJ45 plug, make sure each cable is in each pin. 6. Then use wire crimper to crimp it. 7. Repeat above 5 steps to make the another end. 8. Using network tester to test the cable whether is working.
EIA/TIA 568A
Black 110g
104g 0℃-50℃
-40℃-80℃ 0-95%(non-condensing)
EIA/TIA 568B
Attention: If choose green terminal block,cable of same color should be in the same pin. When choose RJ-45,m ake sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A. or if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
4
