Preview only show first 10 pages with watermark. For full document please download

1/3" Color D/n Board Camera

   EMBED

Share

Transcript

1/3" COLOR D/N BOARD CAMERA SPECIFICATION ITEM NO. SENSOR NUMBER OF PIXELS HORIZONTAL RESOLUTION SCANNING SYSTEM SENSITIVITY SYNCHRONIZATION S/N RATIO GAMMA CORRECTION ELECTRONIC SHUTTER LENS POWER SUPPLY POWER CONSUMPTION AUTO WHITE BALANCE AUTO GAIN CONTROL BACK LIGHT COMPENSATION APERTURE CORRECTION DIMENSION L*W mm NET WEIGHT STORAGE TEMPERATURE OPERATING TEMPERATURE PC-504XS 1/3" SONY CHIP NTSC: 510(H)*492(V)/PAL :500(H)*582(V) More than 420 TV line 2:1 Interlace 0.5 Lux / F2.0 Internal More than 48dB 0.45 Auto and up to 1/100,000 3.6mm Board lens (standard). 4.3mm,6mm,8mm(option) DC 12V (-/+10%) 80mA ±10% under DC 12V ATW WITH MCT TECHNOLOGY (MULTI-COLOR TEMP) Full Auto Full Auto 2H Mode of H.V aperture correction 32mm*32mm 15.8g -30 TO +60 Degree C -10 TO +45 Degree C Specifications are subject to change without notice. Model No : PC-504XS 1/3" COLOR D/N BOARD CAMERA performance signal control circuit. The camera is NTSC system , Incorporates the 1/3" sensor 250,000 pixels The camera is PAL system ,Incorporates the 1/3" sensor 290,000 pixels Feature: * High quality picture, aesthetic and easy to install The Camera is a good complement for your line of CCTV system. * Auto Gain Control (AGC) This AGC function provides clear image in low light condition. * Auto exposure (AE) Make camera can using any light source condition. * Aperture Correction Adding Aperture correction let picture more clear. *Anti color rolling Use the advanced technology to reduce. color rolling under fluorescent lamp. 32 32 4 PIN Red Black White RED:Vdd(DC 12V) BLACK:GND WHITE:VIDEO SIGNAL(1Vp-p) BLACK:GND Black *Connecting the power line and Video signal line, check power is DC 12V and Monitor on 75 Ohm state. *Remove the cap cover of lens. *Turn on the power and then you can see Video display on Monitor. Packing Camera 4 pin cable line Instruction manual 1 1 1 (Red,Black,White,Black)