슬라이드 1 - Castwin

Transcript

DATASHEETS No. Products Model No. Page 1. DSNG Encoder DMP-9724SNG 2 2. MPEG-2/4 AVC HD Encoder (4:2:2) DME-9724HM 4 3. MPEG-2/4 AVC HD Encoder (4:2:2) DME-9724H 6 4. MPEG-2/4 AVC HD Encoder (4:2:0) DME-9624H 8 5. MPEG-2/4 AVC HD Encoder (4:2:0) DME-9524H 10 6. Multi 8 Channel SD Encoder DME-8624S8 12 7. MPEG-2/4 AVC SD Encoder DME-8624S 14 8. Integrated Receiver / Decoder DMD-9724IRD 16 9. MPEG Decoder DMD-9724D 18 10. MPEG HD Mediaplex (4:2:2) DMP-9724M 20 11. MPEG HD Mediaplex (4:2:0) DMP-9624M 22 12. MPEG HD Mediaplex (4:2:0) DMP-9524M 24 13. ISDB-T Multiplexer DMX-1908ST 26 14. DVB-T2 Gateway DMX-1908T2 28 15. Management System NMS 30 16. 8-VSB Modulator DVM-1903ML 31 17. QAM Modulator DQM-1903ML 32 18. IP ⇄ ASI Converter DIC-500 33 19. Multi Digital Scaler DSR-1000 34 20. HDMI to SDI Scaler DSR-500 35 21. Multi Media Converter MMC-1000 36 22. Media Converter (Analog to SDI) ATS-500 37 23. Media Converter (SDI to Analog) STA-500 38 24. Media Converter (SDI to HDMI / HDMI to SDI ) STH-500 / HTS-500 39 DSNG Encoder DMP-9724SNG Encoding & DVB-S/S2 Modulation Latency 150ms Chroma Format 4:2:0 4:2:2 Resolutions up to 1080p L-Band or IF output Feature Introduction DMP-9724SNG designed for Teleports, Digital Satellite News Gathering Vehicles, and it is operating on either the C, Ku or Ka-bands. As a representative model of CASTWIN, it is the best performing and fully programmed high-end encoding. Also, it has DVB-S/S2 modulation with the highest video quality and the lowest latency. Competitiveness • Providing your viewers with the best performance compression and flawless picture quality • Wide use in many projects with high compatibility supporting various formats • Best choice for broadcasting of racing, sports via real time encoding with ultra low latency, at 150ms • Reduce the cost of transmission as supporting wide range of bit-rate control and advanced video coding techniques • Able to Secure space with compact size for installing Options • IP Streaming output Head Office / Laboratory • • • • • • • • Component, Composite, HDMI, HD/SD-SDI video inputs Ultra low latency as 150ms Up to 1080p supported Support 4:2:0(8bit), 4:2:2(10bit) Digital, Analog and SDI embedded audio(8channel) inputs 5.1 channel Dolby Digital (AC-3) encoding support 7.1 channel SPDIF audio optical input (pass through) Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream • Provides internally generated PSI, PSIP, SI • Control of Frame rate • Selectable MPEG-2 HD or H.264 HD real-time video encoding • Simultaneous outputting of 2xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding • Supports EIA-708 Closed caption insertion via HD SDI(SMPTE 334). • Supports internally generated TVCT, CVCT, SDT, NIT • Excellent IP converter integrated performance -Much lower latency & stable IP output • Control and monitoring via web browser, front panel, or SNMP • 4 channel AES/EBU Digital Audio • 4 stereo (8channel) Analog input with D-sub type • Integrated Advanced Scaler function - Control of Frame rate, Image enhance - Phase Noise, Correction of Color, Control of Gamma • L-Band Output 950 ~2150 MHz or IF Output 50 ~ 180 MHz • DVB-S/S2 Modulation • BISS mode-1 and BISS mode-E support • Designed for Teleports, Digital Satellite News Gathering Vehicles • Operating on either the C, Ku or Ka-bands • Symbol Rate: 1 Mbaud ~ 68 Mbaud www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 2 DSNG Encoder DMP-9724SNG Specifications ITEM Analog Video Input Input Level Input Level Digital Resolutions SD Aspect Ratio Input Freq. Range Impedance Connector Input Sampling Rate Connector Input Analog Audio Input Digital Optical Encoding Video Encoder Encoding Rate Chroma Depth PSNR Bit Rate Mode Latency Input Sampling Rate Output sampling Rate Encoding Audio Encoder TS Input TS Output IP TS Output (Option) Ethernet General Audio Mix Bit Rate Delay Transport Stream Connector Packet Format Output Level Transport Stream Connector MPEG-1 Layer II (2ch) AAC LC (2ch, 5.1ch) AC-3 AC-3 Pro MPEG1 AAC LC HE AAC v2 AC-3 Pro 5.1 AAC LC 5.1 HE AAC v1 5.1 DVB-ASI 1port BNC (75 Ω) 188 Byte 800 mVp-p ASI 2port BNC (75 Ω) MPEG-2 : 2.5~55 Mbps , TS Bit Rate H.264 : 2.5~55 Mbps Packet Format 188 Byte Output 1 port Connector RJ-45 Ethernet type 10/100/1000 Base-T Stream Protocol UDP/IP, RTP/IP Broadcasting Multicast, Unicast MPEG-2 : 2.5~55 Mbps , TS Bit rate H.264 : 2.5~55 Mbps Connector RJ-45 Interface Type 10/100 Base-T Protocols SNMP Power Requirements AC 90~230 V, 50/60 Hz Power Consumption Max. 100 W Weight 4 Kg Operating Temperature -10 ~ 50 ℃ Dimensions (W x H x D) 482 x 44 x 483 mm CHARACTER Composite, Component 1 Vp-p HDMI, HD-SDI 1000 mVp-p (HDMI) 800mVp-p (HD-SDI) 480i29.97, 576i25, 720p50/59.94, 1080i25/29.97, 1080p25/29.97 4:3, 16:9 4 Stereo 20 Hz ~ 20 KHz 600 Ω D-SUB 15pin x 2 4 x AES-EBU, Embedded SDI/HDMI (4 Stereo 8 Channel) 32, 44.1 and 48 KHz BNC (75Ω) / HDMI-19PIN SPDIF(7.1 Channel) pass through MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4, MP@L3 MPEG-2 : 1.6~50 Mbps , H.264 : 0.6~50 Mbps 4:2:0(8bit), 4:2:2(10bit) 38 dB CBR,VBR 150 ms~ 32, 44.1, 48 KHz 48 KHz AC-3 (2ch) AC-3 Pro (2ch, 5.1ch) HE-AAC v1 (5.1ch) HE-AAC v2 (2ch) 4 Stereo (8channel) or 5.1ch 128, 192, 256, 384 KHz 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 64, 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 32,48,56,64,80,96,112, 128,160,192, 224, 256, 320,384 KHz 32, 48, 56, 64, 80, 96 KHz 224, 256, 320, 384, 448, 576, 640 KHz 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 96, 112, 128, 160, 192, 224, 256 KHz -100 ~ 400 ms Mode code QPSK, 8PSK, 16QAM Roll-Off 0.05 ~ 0.35 DVB-S BISS Mode (1,E Injected, E Buried) Symbol Rate 1 ~ 68Mbauds DVB-S2 RF Option Mode code Roll-Off BISS Symbol Rate Pilot Insertion Operating Mode Frame Type Reverse Spectrum Tilt Correction Carrier Modulator Out Level L-Band IF QPSK, 8PSK, 16APSK, 32APSK 0.05 ~ 0.35 Mode (1,E Injected, E Buried) 1 ~ 68Mbauds CCM only Normal / Short -0.040 ~ 0.040 dB/MHz -35.00 ~+5.00 dBm 950 ~ 2150 MHz 50/180MHz Configuration www.castwin.com ▶ Digital Products ▶ MPEG Encoders ▶ DSNG Encoder 3 MPEG-2/4 AVC HD Encoder DME-9724HM High-End Encoding Latency 150ms Chroma Format 4:2:0 4:2:2 Resolutions up to 1080p Feature Introduction As a representative Encoder of CASTWIN, it is a newly released product which is the best performing and fully programmed high-end encoding with wonderful video quality and the lowest latency. DME-9724HM let you feel very much reality as if you are the part of video. Also, it enables to transmit more video channels and audio channels at the available bandwidth. Competitiveness • Providing your viewers with the best performance compression and flawless picture quality • Wide use in many projects with high compatibility supporting various formats • Best choice for broadcasting of racing, sports via real time encoding with ultra low latency, at 150ms • Reduce the cost of transmission as supporting wide range of bit-rate control and advanced video coding techniques • Able to Secure space with compact size for installing Head Office / Laboratory • • • • • • • • Component, Composite, HDMI, HD/SD-SDI video inputs Ultra low latency as 150ms Up to 1080p supported Support 4:2:0(8 bit), 4:2:2(10 bit) Digital, Analog and SDI embedded audio(8channel) inputs. 5.1 channel Dolby Digital (AC-3) encoding support 7.1 channel SPDIF audio optical input(pass through) Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream • Provides internally generated PSI, PSIP, SI • Control of Frame rate • Selectable MPEG-2 HD or H.264 HD real-time video encoding • Simultaneous outputting of 2xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding • Supports EIA-708 Closed caption insertion via HD SDI(SMPTE 334) • Supports internally generated TVCT, CVCT, SDT, NIT • Excellent IP converter integrated performance -Much lower latency & stable IP output • Control and monitoring via web browser, front panel, or SNMP • 4 channel AES/EBU Digital Audio • 4 stereo(8channels) analog input with D-sub type • Integrated Advanced Scaler function - Control of Frame rate, Image enhance - Phase Noise, Correction of Color, Control of Gamma www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 4 MPEG-2/4 AVC HD Encoder DME-9724HM Specifications CHARACTER ITEM Analog Digital Video Input Resolutions SD Aspect Ratio Analog Audio Input Digital Optical Encoding Video Encoder Audio Mix Bit Rate Audio Encoder TS Output IP TS Output Ethernet General Input Freq. Range Impedance Connector Input Sampling Rate Connector Input Encoding Rate Chroma Format PSNR Bit Rate Mode Latency Input Sampling Rate Output sampling Rate Encoding TS Input Input Level Input Level Delay Transport Stream Connector Packet Format Output Level Transport Stream Connector TS Bit Rate Packet Format Output Connector Ethernet type Stream Protocol Broadcasting TS Bit rate Connector Interface Type Protocols Power Requirements Power Consumption Weight Operating Temperature Dimensions (W x H x D) MPEG-1 Layer II (2ch) AAC LC (2ch, 5.1ch) AC-3 AC-3 Pro MPEG1 AAC LC HE AAC v2 AC-3 Pro 5.1 AAC LC 5.1 HE AAC v1 5.1 Composite, Component 1 Vp-p HDMI, HD-SDI 1000 mVp-p (HDMI) 800mVp-p (HD-SDI) 480i29.97, 576i25, 720p50/59.94, 1080i25/29.97, 1080p25/29.97 4:3, 16:9 4 Stereo 20 Hz ~ 20 KHz 600 Ω D-SUB 15pin x 2 4 x AES-EBU, Embedded SDI/HDMI (4 Stereo 8 Channel) 32, 44.1 and 48 KHz BNC (75Ω) / HDMI-19PIN SPDIF(7.1 Channel) pass through MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4, MP@L3 MPEG-2 : 1.6~50 Mbps , H.264 : 0.6~50 Mbps 4:2:0, 4:2:2 (8 bit / 10 bit) 38 dB CBR,VBR 150 ms~ 32, 44.1, 48 KHz 48 KHz AC-3 (2ch) AC-3 Pro (2ch, 5.1ch) HE-AAC v1 (5.1ch) HE-AAC v2 (2ch) 4 Stereo (8ch) or 5.1ch 128, 192, 256, 384 KHz 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 64, 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 32,48,56,64,80,96,112, 128,160,192, 224, 256, 320,384 KHz 32, 48, 56, 64, 80, 96 KHz 224, 256, 320, 384, 448, 576, 640 KHz 96, 112, 128, 160, 192, 224, 256, 320, 384 KHz 96, 112, 128, 160, 192, 224, 256 KHz -100 ~ 400 ms DVB-ASI 1port BNC (75 Ω) 188 Byte 800 mVp-p ASI 2port BNC (75 Ω) MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps 188 Byte 1 port RJ-45 10/100/1000 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps RJ-45 10/100 Base-T SNMP AC 90~230 V, 50/60 Hz Max. 100 W 4 Kg -10 ~ 50 ℃ 482 x 44 x 483 mm Configuration www.castwin.com ▶ Digital Products ▶ MPEG Encoders ▶ MPEG-2/4 AVC HD Encoder 5 MPEG-2/4 AVC HD Encoder DME-9724H High-End Encoding Latency 150ms Chroma Format 4:2:0 4:2:2 Resolutions up to 1080p Feature Introduction As a representative Encoder of CASTWIN, it is a newly released product which is the best performing and fully programmed high-end encoding with wonderful video quality and the lowest latency. DME-9724H let you feel very much reality as if you are the part of video. Also, it enables to transmit more video channels and audio channels at the available bandwidth. Competitiveness • Providing your viewers with the best performance compression and flawless picture quality • Wide use in many projects with high compatibility supporting various formats • Best choice for broadcasting of racing, sports via real time encoding with ultra low latency as 150ms • Reduce the cost of transmission as supporting wide range of bit-rate control and advanced video coding techniques. • Able to Secure space with compact size for installing Head Office / Laboratory • • • • • • • • Component, Composite, HDMI, HD/SD-SDI video inputs Ultra low latency as 150ms Up to 1080p supported Support 4:2:0(8 bit), 4:2:2(10 bit) Digital, Analog and SDI embedded audio(8channel) inputs. 5.1 channel Dolby Digital (AC-3) encoding support 7.1 channel SPDIF audio optical input(pass through). Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream. • Provides internally generated PSI and PSIP. • Various functions with integrated Advanced Scaler. • Control of Frame rate, Image enhance, Phase Noise, Correction of Color, Control of Gamma • Selectable MPEG-2 HD or H.264 HD real-time video encoding. • Simultaneous outputting of 2xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding. • Supports EIA-708 Closed caption insertion via HD SDI(SMPTE 334). www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 6 MPEG-2/4 AVC HD Encoder DME-9724H Specification Video Input Analog Digital Input Level Input Level Resolutions SD Aspect Ratio TS Input Component , Composite 1 Vp-p HDMI , SDI 1000 mVp-p (HDMI) 800mVp-p (SDI) 480i29.97, 576i25, 720p50/59.94 1080i25/29.97 1080p25/29.97 4:3, 16:9 Transport Stream Connector Packet Format Input Level 1 stereo 20Hz ~ 20KHz 600 Ω Mini XLR AES-EBU, Embedded SDI/HDMI(8Ch) 32, 44.1, 48 KHz BNC (75Ω) / HDMI-19PIN SPDIF(7.1 Channel) (pass through). Packet Format MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4, MP@L3 MPEG-2 : 1.6~50 Mbps H.264 : 0.6~50 Mbps 4:2:0(8bit), 4:2:2 (10bit) 38dB CBR,VBR 150ms~ TS Packet Rate Audio Input Analog Digital Optical Input Freq. Range Impedance Connector Input Sampling Rate Connector Input Video Encoder Encoding Encoding Rate Chroma Format PSNR Bit Rate Mode Latency TS Output Transport Stream Connector TS Bit Rate ASI 2 port BNC(75Ω) MPEG-2 : 2.5~55 Mbps H.264: 2.5~55 Mbps 188, 204 Byte IP TS Output Output Connector Ethernet type Format IP Address Format TS Bit rate 1 Port RJ-45 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 2.5~55 Mbps H.264: 2.5~55 Mbps 188,204 Byte Ethernet Connector Interface Type Protocols RJ-45 10/100Base-T SNMP General Audio Encoder Sampling Rate Dolby Digital® AC-3(7.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2 ASI 1 Port BNC(75Ω) 188 Byte 800mVp-p 32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4 kg -10~50°C 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 7 MPEG-2/4 AVC HD Encoder DME-9624H Latency 800ms Chroma Format 4:2:0 (8bit) Resolutions up to 1080p Introduction Feature CASTWIN’s High-definition encoder offering highest video quality with low latency. It shows excellent performance for inputting signal (Analog & Digital) to output as transport stream signal after compressing and encoding for suitable digital transmission with various supported formats. Moreover, it supports both MPEG-2 and H.264 so that it makes operators select the format as they want. • • • • • Competitiveness • Excellent option for operators who competitively pursue the best performing encoding device with high resolution up to 1080p • Good option for Real time encoding with low latency • Low cost and High performance • Able to secure space with compact and light weight design • Make operators pay for less labor fee as offering quick and easy setup Component, Composite, HDMI, HD/SD-SDI video inputs. Low latency as 800ms Digital, Analog and SDI embedded audio(4ch) inputs. 5.1 channel SPDIF audio optical input(pass through) Additional 1xASI input for supporting of insertion of externally Generated PSIP into the transport stream. • Video input Auto detection function. • Selectable MPEG-2 or H.264 HD/SD real-time video encoding. • Various functions with integrated Advanced Scaler. • Control of Frame rate, Image enhance, Phase Noise, Correction of Color, Control of Gamma • Simultaneous outputting of 2xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding. Options DME-9624HM Excellent IP converter integrated - Much lower latency - More stable IP output Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 8 MPEG-2/4 AVC HD Encoder DME-9624H Specification Video Input Analog Input Level Digital Input Level Resolutions SD Aspect Ratio TS Input Component , Composite 1 Vp-p HDMI , SDI 1000 mVp-p (HDMI) 800mVp-p (SDI) 480i29.97/30, 576i25, 720p50/59.94/60, 1080i25/29.97/30, 1080p25/29.97/30 4:3, 16:9 Audio Input Analog Digital Optical Input Freq. Range Impedance Connector 1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω Mini XLR Input AES-EBU, Embedded SDI/HDMI Sampling Rate Connector Input 32, 44.1, 48 KHz BNC (75Ω) / HDMI-19PIN SPDIF(5.1 Channel) (pass through). Video Encoder Encoding Encoding Rate Chroma Format PSNR Bit Rate Mode Latency MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4 , MP@L3 MPEG-2 : 2~17.2 Mbps H.264 : 0.5~17.2 Mbps 4:2:0 (8bit) 36dB CBR, VBR 800ms~ Audio Encoder Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2 Transport Stream Connector Packet Format Input Level ASI 1 Port BNC(75Ω) 188 Byte 800mVp-p TS Output Transport Stream Connector TS Bitrate Packet Format ASI 2 port BNC(75Ω) MPEG-2 : 3.4~19 Mbps H.264 : 2.5~19 Mbps 188 Byte IP TS Output Output Connector Ethernet type Format IP Address Format TS Bitrate TS Packet Rate 1 Port RJ-45 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 3.4~19 Mbps H.264 : 2.5~19 Mbps 188, 204 Byte Ethernet Connector Interface Type Protocols RJ-45 10/100Base-T SNMP General 32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 9 MPEG-2/4 AVC HD Encoder DME-9524H Latency 1100ms Chroma Format 4:2:0 Resolutions up to 1080i Introduction Feature CASTWIN’s High-Definition encoder with the highest video quality and low latency. It shows outstanding performance for inputting signal (Analog & Digital) to output as transport stream signal after compressing and encoding for suitable digital transmission with various supported formats. Moreover, it supports both MPEG-2 and H.264 so that it make operator select the format as they want. Also, it is very easy to control with Hi-class front VFD. • • • • Competitiveness • Easily adaptable to a wide range of professional application requiring high level performance functionality. • Cost effective device with high resolution up to 1080i • Retain your viewers with high performance compression and flawless quality • Offer user friendly interface with simple set-up and operation • Compact and light weight design Head Office / Laboratory Component, Composite, HDMI, HD/SD-SDI video inputs. Low latency as 1,100ms Digital and Analog audio inputs. Selectable MPEG-2 or H.264 HD/SD real-time video encoding. • Selectable outputting of 2xTransport stream (ASI) or UDP/IP transport stream. • CBR outputs. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC audio encoding. • User selectable resolution and bit rate. • Control and monitoring via web browser, front panel or SNMP • Support Internally generated PSI /PSIP www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 10 MPEG-2/4 AVC HD Encoder DME-9524H Specification Video Input Analog TS Output Input Level Digital Input Level Resolutions Component , Composite 1 Vp-p HDMI , SDI 1000 mVp-p (HDMI) 800mVp-p (SDI) 480i, 480p, 576i, 576p, 720p, 1080i 25,29.97/30, 50, 59.94/60 Transport Stream Connector TS Bit Rate ASI 2 port BNC(75Ω) 3.5~30 Mbps Packet Format 188 Byte SD Aspect Ratio 4:3, 16:9 IP TS Output Audio Input Analog Digital Input Freq. Range Impedance Connector Input Sampling Rate Connector 1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω PS/2 Embedded SDI/HDMI 48 KHz BNC (75Ω) / HDMI-19PIN Encoding Rate Chroma Format PSNR Bit Rate Mode Latency MPEG-2 MP@HL , MP@ML H.264 HP@L4, MP@L3 3.5~30 Mbps 4:2:0 33dB CBR 1100ms~ Audio Encoder Sampling Rate Dolby Digital® AC-3 MPEG-1 Layer II MPEG-4 AAC-LC 1 Port RJ-45 100/1000 Base-T UDP/IP Unicast / Multicast 188 Byte Ethernet Connector Interface Type Protocols Video Encoder Encoding Output Connector Ethernet type Format IP Address Format TS Packet Rate RJ-45 10/100Base-T SNMP General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4 kg -10~50°C 482 x 44 x 383 mm 48KHz 128,192,256,384 Kbps 64,96,128,160,192,224,256,320,384 Kbps 64,96,128,160,192,224,256,320,384 Kbps Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 11 Multi 8 channel SD Encoder DME-8624S8 8 Channel MPEG-2 & H.264 SD Encoding Latency 800ms 8 channel Multiplexing Introduction Feature DME-8624S8 is a Multi 8 channel Standard-Definition Encoder, as a newly released product of CASTWIN. It supports MPEG-2 and H.264 encoding and multiplexing with high video quality and low latency. Also, it is cost effective and makes the device widely used in varieties of digital distribution such as CATV/MATV/IPTV digital headend. • • • • • • • • • 8 Channel Encoding Composite video input MPEG-2 and H.264 real-time video encoding Latency as 800 ms CBR or VBR outputs Dolby Digital(AC-3), MPEG-1 Layer II audio encoding User Selectable resolution and bit rate Control and monitoring via front panel Excellent IP streaming output Competitiveness • Saving your budget opportunities by 8 Channel Encoding • Ensure critical content quality is preserved by using highest – performance compression and flawless picture quality • Reduce the installing cost with simple set-up and Compact Size • Able to Secure space with Compact and light weight design Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 12 Multi 8 channel SD Encoder DME-8624S8 Specification Video Input Analog Input Resolutions Aspect Ratio TS Output Composite 480i29.97, 576i25 4:3, 16:9 Transport Stream Connector TS Bit Rate Packet Format ASI 3 port BNC(75Ω) 1~150 Mbps 188 Byte Audio Input IP TS Output Analog Input Freq. Range Impedance 1 Stereo 20Hz ~ 20KHz 600 Ω Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency MPEG-2 MP@ML H.264 MP@L3 MPEG-2 : 2~12 Mbps H.264 : 0.5~2.5 Mbps 4:2:0 CBR, VBR 800ms~ 1 Port RJ-45 10/100/1000 Base-T UDP/IP, RTP/IP Unicast / Multicast Ethernet Connector Interface Type Protocols RJ-45 10/100Base-T SNMP General Audio Encoder Sampling Rate Dolby Digital® AC-3 MPEG-1 Layer II AAC-LC HE-AAC v1 HE-AAC v2 Output Connector Ethernet type Stream Protocols IP Address Format 48KHz 128,192,256,384 Kbps 64, 112~384Kbps 32 ~ 384Kbps 32 ~ 192Kbps 32 ~ 96Kbps Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4 kg -10~50°C 482 x 44 x 483 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 13 MPEG-2/4 AVC SD Encoder DME-8624S MPEG-2 & H.264 SD Encoding Latency 800ms Output ASI / IP Stream Introduction Feature CASTWIN’s the standard definition encoder with the highest video quality and low latency. It is perfect choice for customers who are expecting the high-class products on video/audio quality. It shows outstanding performance for inputting signal(Analog & Digital) to output as transport stream signal after compressing and encoding for suitable digital transmission with various supported formats. Moreover, it supports both MPEG-2 and H.264 so that it make operator select the format as they want. Also, it is very easy to control with Hi-class front VFD. • • • • Competitiveness • Providing your viewers with the best performance compression and flawless picture quality • Perfect option for broadcasting of sports, racing with Real time encoding with low latency • Increase revenue opportunities by enabling additional services • Reduce the cost of transmission as supporting Wide range of bit-rate control and advanced video coding techniques. • Additional Cost reduction with Simple set-up and operation Head Office / Laboratory Component, Composite, HDMI, SD-SDI video inputs. Digital, Analog and SDI embedded audio inputs. Low latency as 800ms Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream. • Video input Auto detection function. • Selectable MPEG-2 SD or H.264 SD real-time video encoding. • Simultaneous outputting of 2xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • CBR outputs. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding. • Supports internally generated TVCT, CVCT, SDT, NIT • Control and monitoring via web browser, front panel, or SNMP www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 14 MPEG-2/4 AVC SD Encoder DME-8624S Specification Video Input Analog Input Level Digital Input Level Resolutions Aspect Ratio TS Input Component , Composite 1 Vp-p HDMI , SDI 1000 mVp-p (HDMI) 800mVp-p (SDI) 480i29.97/30, 576i,25 4:3, 16:9 Audio Input Analog Digital Input Freq. Range Impedance Connector Input Sampling Rate Connector 1 Stereo 20Hz ~ 20KHz 600 Ω Mini XLR AES-EBU, Embedded SDI/HDMI 32, 44.1, 48 KHz BNC (75Ω) / HDMI-19PIN Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency MPEG-2 MP@ML H.264 MP@L3 MPEG-2 : 2~15 Mbps H.264 : 0.5~15 Mbps 4:2:0 CBR, VBR 800ms~ 32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps ASI 1 Port BNC(75Ω) 188 Byte 800mVp-p TS Output Transport Stream Connector TS Bit Rate Packet Format ASI 2 port BNC(75Ω) MPEG-2 : 3.4~19 Mbps H.264 : 2.5~19 Mbps 188 Byte IP TS Output Output Connector Ethernet type Format IP Address Format TS Bit Rate TS Packet Rate 1 Port RJ-45 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 3.4~19 Mbps H.264 : 2.5~19 Mbps 188 Byte Ethernet Connector Interface Type Protocols Audio Encoder Sampling Rate Dolby Digital® AC-3 MPEG-1 Layer II MPEC-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-2 HE-AAC v2 Transport Stream Connector Packet Format Input Level RJ-45 10/100Base-T SNMP General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4. Kg -10~50°C 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 15 Integrated Receiver / Decoder DMD-9724IRD DVB-S/S2 Receiving Latency 100ms Chroma Format 4:2:0 4:2:2 Introduction Feature As a representative decoder, the professional IRD is housed in a space-efficient chassis that receives various signals for decompressing. It is applied in many different kinds of networks, such as broadband fiber, cable, digital terrestrial, satellite and any other distribution network. It is very suitable for broadcast and professional applications requiring 4:2:2/4:2:0 decoding solution. • • • • • • • • • • • • • • • • Competitiveness • Providing your customers with the best performance of decoding and high quality • Save your cost with various conversion • Able to secure space with Compact and light weight design • Easy to set-up and control MPEG-2/H.264 SD/HD 10bit/8bit 4:2:2/4:2:0 video decoding. High quality SDI digital video SD Aspect ratio conversion(4:3, 16:9) 2 x ASI , RF, IP video inputs Configured and controlled via front panel LCD. HD-SDI outputs with embedded audio HDMI output Component Video output Analog 4 stereo outputs. SNMP control and monitoring NTSC, PAL video formats Resolution – up to 1080p 29.97 IP Stream output Inputs – ATSC, ASI, QAM (Annex B) 8ch AES/EBU audio input Video Scaling Option (Up/Down/Cross) Options • DVB-CI (under development) Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 16 Integrated Receiver / Decoder DMD-9724IRD Specification ASI Output RF Input Input Channel Impedance Module Option 1CH 75Ω DVB-S/S2/T/T2, DVB-C(Annex A, B, C), ATSC 2 x BNC Video Output IP Stream Input No. of Port Connector Format Max Input rate DVB-ASI 1 port RJ-45 100/1000BaseT 188Mbps Analog Output Digital Output Resolutions SD Aspect Ratio Composite, Component HDMI x 1 , SDI x 2 480i29.97, 576i25, 720p50/59.94, 1080p25/29.97 4:3, 16:9 ASI Input Audio Output DVB-ASI SMPTE310M 2 x BNC Analog Video Decoding Digital MPEG-2 SD Profile Max video rate Video format MPEG-2 HD Profile Max video rate Video format MP@ML(4:2:0) / 422@ML (4:2:2) 80 Mbps [email protected] fps/576i@25 fps MP@HL(4:2:0) / 422@HL(4:2:2) 80 Mbps [email protected] fps/25 fps, [email protected] fps/50 fps H.264 SD Profile MP@L3(4:2:0) / 422HP@L3 (4:2:2) Max video rate 80 Mbps Video format [email protected] fps/576i@25 fps H.264 HD Profile MP@L4 HP@L4 [email protected](4:2:0) HIGH/HIGH10/[email protected] (4:2:2) Max video rate 80 Mbps 50 Mbps CABAC, 85 Mbps CAVLC Video format [email protected] fps/25 fps, [email protected] fps/50 fps Chroma Format 4:2:0 / 4:2:2 (10bit) Bit Rate Mode CBR,VBR Latency 100ms~ Output Freq. Range Impedance Output Sampling Rate 4 balanced stereo pairs 20Hz ~ 20KHz 600 Ω Embedded SDI/HDMI 48 KHz IP Stream Output Interface Type Stream Protocols Broadcasting 10/100/1000 Base-T UDP/IP, RTP/IP Multicast, Unicast General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) Power Requirements AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm AC 90~230V, 50/60Hz Audio Decoding Audio Sampling rate 48kHz MPEG-1 Layer 2 1.0/2.0 decode / pass-through Dolby® Digital Pro 2.0//5.1 decode / consumer 2.0 decode Plus 5.1/7.1 decode/5.1 decode &down-min to 2 2.0/5.1 pass-through//plus 5.1/7.1 pass-through E 2.0/5.1/7.1 pass-through AAC Audio AAC-LC 2.0/5.1 decode / HE-AAC v1 5.1 decode HE-AAC v2 2.0 decode AAC-LC 2.0/5.1 pass-through Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 17 MPEG Decoder DMD-9724D MPEG-2 & H.264 Decoding Latency 100ms Chroma Format 4:2:0 4:2:2 Introduction Feature As a professional MPEG decoder, DMD-9724D is able to receive many different kinds of broadcasting signals and output as various digital interface signals. Moreover; it is able to decode MPEG-2 and H.264 in both 4:2:2 and 4:2:0. • • • • • • • • • MPEG-2/H.264 4:2:0(8bit)/4:2:2(10bit) video decoding. SD Aspect ratio conversion(4:3, 16:9) Configured and controlled via front panel LCD. HD-SDI outputs with embedded audio Composite Video output Analog stereo outputs. SNMP control and monitoring HDMI Output NTSC, PAL video receiving Competitiveness Options • Providing your customers with the best performance of decoding and high quality • Able to secure space with Compact and light weight design • Easy to set-up and control Input- DVB-ASI, IP Stream RF(8-VSB, QAM, DVB-T/T2, DVB-S) options Head Office / Laboratory Output – HDMI, HD-SDI, Composite, Component(Option) www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 18 MPEG Decoder DMD-9724D Specification Video Output RF Input Frequency Range Input Channel Impedance 54~864MHz (8-VSB, QAM, DVB-T,/S) 1CH 75Ω Input Level Return Loss Noise Figure -25~25dBmV ≥ 17 dB VHF 7dB, UHF 9dB TS Input Transport Stream Packet Format Connector TS Bit Rate DVB-ASI 1 port 188 Byte BNC(75Ω) MPEG-2 : 2.5~55 Mbps H.264 : 2.5~55 Mbps 1 port RJ-45 10/100/1000 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 2.5~55 Mbps H.264 : 2.5~55 Mbps Video Decoder Decoding Resolutions SD Aspect Ratio Composite, Component(option) HDMI , SDI 480i29.97, 576i25, 720p50/59.94, 1080i25/29.97, 1080p25/29.97 4:3, 16:9 Audio Output Analog IP TS Input IP Stream Connector Ethernet type Format IP Address Format TS Bit Rate Analog Output Digital Output Digital Optical Output Freq. Range Impedance Output Sampling Rate Input 1 Stereo 20Hz ~ 20KHz 600 Ω Embedded SDI/HDMI (4stereo 8ch) 32, 48 KHz SPDIF(7.1Channel) Pass Through Ethernet Interface Type Protocols 10/100Base-T SNMP General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) Power Requirements AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm AC 90~230V, 50/60Hz MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4, MP@L3 Bit Rate Chroma Format Bit Rate Mode Latency 4:2:0, 4:2:2 (10bit) CBR,VBR 100ms~ Audio Decoder Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2 32, 48KHz 128,192,256,384,448,512,576,640 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 19 MPEG HD Mediaplex DMP-9724M HD Encoder & Modulator Latency 150ms Chroma Format 4:2:0, 4:2:2 (10bit) Resolutions HD 1080p Introduction As a representative model of CASTWIN, it is a new released evolutionary product. It is the professional and Hi-class product combining Ultra low delay HD Encoder and ATSC(8-VSB) Modulator. Moreover, it supports both MPEG-2 and H.264 so that operator can select and use the format. It is adopting high technology and very effective to make whole Digital Transmission System very compact and easy to control with front VFD. Competitiveness • Retain your viewers with high performance compression and flawless quality • Cost effective solution as a product combined modulator and up-converter • Wide use in many projects with high compatibility supporting various formats • Best choice for broadcasting of racing, sports via real time encoding with ultra low Latency as 150ms • Reduce the cost of transmission as supporting wide range of bit-rate control and advanced video coding techniques. • Able to secure space with compact size for installing Feature • • • • • • Advanced modulation integrated Component, Composite, HDMI, HD/SD-SDI video inputs. Ultra low latency as 150ms Digital, Analog and SDI embedded audio(8ch) inputs. 7.1 channel SPDIF audio optical input(pass through). Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream. • Provides internally generated PSI and PSIP. • Selectable MPEG-2 or H.264 real-time video encoding. • Simultaneous outputting of 1xRF and 1xTransport stream (ASI) with UDP/IP or RTP/IP transport stream. • CBR or VBR outputs. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding. • Supports EIA-708 Closed caption insertion via HD SDI(SMPTE 334). • Control and monitoring via web browser, front panel, or SNMP. • PCR Jitter : ≤ ± 200 ns • Excellent RF Output performance • Scaling function with integrated Advanced Scaler • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz • Frequency : 54 ~ 1002MHz • MER After Equalizer : 42dB Options QAM(Annex A, B and C) Modulation DVB-T Modulation Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 20 MPEG HD Mediaplex DMP-9724M Specifications ITEM Analog Digital Video Input Resolutions Aspect Ratio Analog Audio Input Digital TS Input Video Encoder Audio Encoder RF Output TS Output IP TS Output (Option) Ethernet General Optical Transport Stream Packet Format Encoding CHARACTER Input Input Level Input Freq. Range Impedance Input Sampling Rate Input Encoding Rate Chroma Format PSNR Bit Rate Mode Latency Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2 Frequency Range Impedance Output Level Level Control Range MER After Equalizer MER Before Equalizer Phase Noise Adjacent Channel Carrier/Attenuation Characteristic Spurious Return Loss Frequency Response Frequency Tolerance Group Delay PCR Jitter Transport Stream TS Bit Rate Packet Format Output Connector Ethernet type Stream Protocol Broadcasting TS Bit Rate Connector Interface Type Protocols Power Requirements Power Consumption Weight Operating Temperature Dimensions (W x H x D) Component , Composite HDMI , HD-SDI 1000 mVp-p (HDMI) / 800 mVp-p (HD-SDI) 480i29.97, 576i25, 720p50/59.94, 1080i25/29.97 4:3, 16:9 Stereo 20 Hz ~ 20 KHz 600 Ω/ 20 KΩ AES-EBU Embedded SDI/HDMI (4 Stereo 8 Channel) 32,44.1,48 KHz SPDIF (7.1Channel) Pass Through ASI 1 Port 188 Byte MPEG-2 MP@HL , MP@ML H.264 HP@L4, MP@L3 MPEG-2 : 0.6~55 Mbps , H.264 : 1.6~50 Mbps 4:2:0, 4:2:2 (8 bit/10 bit) 38 dB CBR,VBR 150 ms~ 48 KHz 128,192,256,384,448,512,576,640 Kbps 64,96,112,128,160,192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps 50~1002 MHz 75 Ω 50 ± 5 dBmV 0 ~ -15 dB 42 dB 37 dB VHF -105 dB@20KHz, UHF -103 dB@20KHz ≤ -45 dB (Out of band) ≤ -63 dB ≥ 17 dB ± 0.5 dB ± 2 ppm ± 20 ns ≤ ± 200 ns ASI 1 port MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps 188 Byte 1 Port RJ-45 10/100/1000 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 2.5~55 Mbps , H.264 : 2.5~55 Mbps RJ-45 10/100 Base-T SNMP AC 90~230 V, 50/60 Hz Max. 100 W 4 Kg -10~50 °C 483 x 44 x 383 mm Configuration www.castwin.com ▶ Digital Products ▶ MPEG Mediaplexs ▶ MPEG HD Mediaplex 21 MPEG HD Mediaplex DMP-9624M HD Encoder & Modulator Latency 800ms Chroma Format 4:2:0 Resolutions 1080p Introduction Feature CASTWIN’s the professional and hi-class product combining low delay HD Encoder and ATSC(8-VSB) Modulator. It is adopting high technology and very effective to make whole Digital Transmission System very compact and easy to control with front VFD. Moreover, it supports both MPEG-2 and H.264 so that operator can select and use the format. • • • • • Competitiveness • Cost effective as integrated modulator and up-converter • Excellent option for operators who competitively pursue the best performing encoding device with high resolution • Best option for Real time encoding with low latency • Able to Secure space with Compact and light weight design • Make operators pay for less installing fee as offering Quick and easy setup Component, Composite, HDMI, HD/SD-SDI video inputs. Digital, Analog and SDI embedded audio inputs. 5.1 channel SPDIF audio optical input(pass through). Low latency as 800ms Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream. • Selectable MPEG-2 HD or H.264 HD real-time video encoding. • Simultaneous outputting of 1xRF and 1xTransport stream(ASI) with UDP/IP or RTP/IP transport stream • CBR outputs. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC, HE-AAC audio encoding. • Supports internally generated TVCT, CVCT, SDT, NIT • Scaling function with integrated Advanced Scaler • Supports EIA-708 Closed caption insertion via HDSDI(SMPTE 334). • Control and monitoring via web browser, front panel, or SNMP • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz • Frequency : 54 ~ 1002MHz • Excellent RF Output performance Options QAM(Annex A, B and C) Modulation DVB-T Modulation Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 22 MPEG HD Mediaplex DMP-9624M Specification Video Input Analog Digital Input Input Resolutions Aspect Ratio Component , Composite HDMI , SDI 480i29.97/30, 576i25, 720p50/59.94/60, 1080i25/29.97/30 1080p25/29.97/30 4:3, 16:9 Audio Input Analog Digital Optical Input Freq. Range Impedance Input Sampling Rate Input 1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω AES-EBU Embedded SDI/HDMI 32,44.1,48 KHz SPDIF(5.1 Channel) (pass through ASI 1 Port 188 Byte Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4 , MP@L3 MPEG-2 : 2~17.2 Mbps H.264 : 0.5~17.2 Mbps 4:2:0 CBR, VBR 800ms~ Audio Encoder Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2 Phase Noise 54~870 MHz 75 Ω 50 ± 5 dBmV 0 ~ -15 dB 42 dB 37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz Adjacent Channel ≤ -45 dB (Out of band) Carrier/Attenuation Characteristic Spurious ≤ -63 dB Return Loss ≥ 17 dB Frequency Response ± 0.5 dB Frequency Tolerance ± 2 ppm Group Delay ± 20 ns PCR Jitter ≤ ± 200 ns TS Output TS Input Transport Stream Packet Format RF Output Frequency Range Impedance Output Level Level Control Range MER After Equalizer MER Before Equalizer Transport Stream TS Bit Rate Packet Format Ethernet Interface Type Protocols IP TS Output Output Ethernet type Format IP Address Format TS Bit Rate TS Packet Rate 32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) ASI 1 port MPEG-2 : 3.4~19 Mbps H.264: 2.5~19 Mbps 188 Byte 10/100Base-T SNMP 1 Port 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 3.4~19 Mbps H.264: 2.5~19 Mbps 188 Byte AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 23 MPEG HD Mediaplex DMP-9524M HD Encoder & Modulator Latency 1100ms Chroma Format 4:2:0 Introduction Feature CASTWIN’s professional and hi-class product combining low delay HD Encoder and ATSC(8-VSB) Modulator. It is adopting high technology and very effective to make whole Digital Transmission System very compact and easy to control with front VFD. • • • • Competitiveness • Easily adaptable to a wide range of professional application requiring high level performance functionality. • Retain your viewers with high performance compression and flawless quality • Save installing fee with Simple set-up and operation • Retain your viewers with high quality and low attenuation Component, Composite, HDMI, HD/SD-SDI video inputs Digital and Analog audio inputs Low latency as 1,100ms Selectable MPEG-2 HD or H.264 real-time video encoding. • CBR outputs. • Dolby Digital (AC-3), MPEG-1 Layer II, AAC-LC audio encoding. • User selectable resolution and bit-rate, output frequency. • Control and monitoring via web browser, front panel. • PCR Jitter : ≤ ± 200 ns • Group Delay as ± 20 ns • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz • Frequency : 54~ 1002MHz • Excellent RF Output performance • MER After Equalizer : 42dB • Support Internally generated PSI /PSIP Options QAM(Annex A, B and C) Modulation DVB-T Modulation Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 24 MPEG HD Mediaplex DMP-9524M Specification Video Input Analog Digital Input Input Resolutions Aspect Ratio RF Output Component , Composite HDMI , SDI 480i, 480p, 576i, 576p,720p, 1080i 25,29.97/30,50,59.94/60 4:3, 16:9 Audio Input Analog Digital Input Freq. Range Impedance Input Sampling Rate Phase Noise 1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω/ 20KΩ Embedded SDI/HDMI 48 KHz Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency MPEG-2 MP@HL , MP@ML H.264 HP@L4, MP@L3 3.5~30 Mbps 4:2:0 CBR 1,100ms~ Audio Encoder Sampling Rate Dolby Digital® AC-3 MPEG-1 Layer II AAC-LC (H.264 Only) 48KHz 128,192,256,384 Kbps 64,96,128,160,192,224,256,320,384 Kbps 64,96,128,160,192,224,256,320,384 Kbps TS Output Transport Stream TS Bit Rate Packet Format Frequency Range Impedance Output Level Level Control Range MER After Equalizer MER Before Equalizer ASI 1 port 3.5~30 Mbps 188 Byte 54~870 MHz 75 Ω 50 ± 5 dBmV 0 ~ -15 dB ≥ 42 dB ≥ 37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz Adjacent Channel ≤ -45 dB (Out of band) Carrier/Attenuation Characteristic Spurious ≤ -63 dB Return Loss ≥ 17 dB Frequency Response ± 0.5 dB Frequency Tolerance ± 2 ppm Group Delay ± 20 ns PCR Jitter ≤ ± 200 ns Ethernet Interface Type Protocols 10/100Base-T SNMP IP TS Output Output Ethernet type Format IP Address Format 1 Port 10/100 Base-T UDP/IP Unicast / Multicast TS Packet Rate 188 Byte General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D) AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 25 ISDB-T Multiplexer DMX-1908ST Professional ISDB-T / ISDB-Tb Multiplexer Introduction Feature CASTWIN’s high-performance ISDB-Tb multiplexer DMX-1908ST is and ideal & cost-effective solution for ISDB-T/Tb transmitter/translator manufacturers, system integrators and broadcaster who want their own ISDBTb multiplexer in any region or country where is adopting ISDB-Tb • • • • • • • Fully complying with ISDB-T & ISDB-Tb standards Compact & Cost-effective ISDB-Tb Multiplexer External 10MHz & 1PP input (SFN supports) PSI/SI Information editing & generating PCR Correction and PID re-mapping IIP Packet editing and inserting Interoperability proven with major ISDB-Tb Transmitters The DMX-1908ST : ISDB-Tb multiplexer supports SFN with 1PPS & 10MHz input. It provides various remultiplexing function such as PCR correction, PID remapping, and PSI information editing & generating Transmitter/Translator manufacturers can provide package solution which combines their own ISDB-Tb transmitter/translator and DMX-1908ST : ISDB-Tb together for broadcasters. It will be your strong competitiveness comparing with other competitors who has only exciter or translator. Of course, DMX-1908ST : ISDB-Tb will be a perfect solution for broadcasters who want to find more cost-effective Head-end multiplexer Competitiveness • supports SFN with 1PPS & 10Mhz input • provides various re-multiplexing functions such as PCR correction, PID re-mapping,, and PSI/SI information editing & generating • supports various global DTV/Mobile TV Standards, including ISDB-T, ATSC, ATSC-M/H, CMMB, DVB-T2 and SFCMM on single board Additionally, DMX-1908ST supports various global DTV/ mobile TV standards, including ISDB-T, ATSC, ATSCM/H, CMMB, DVB-T2, and SFCMM on single board. With its FPGA based H/W architecture, user can upgrade new DTV/Mobile TV standards on DMX1908ST board easily. Options ISDB-T & ISDB-Tb Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 26 ISDB-T Multiplexer DMX-1908ST Specification Input DVB-ASI input GPS 10MHz Reference Clock GPS 1PPS Signal Output 8EA 1EA 1EA DVB-ASI Output 10MHz Loop Out 2EA 1EA Multiplexing & Re-multiplexing User Control TS Multiplexer & Re-multiplexer PCR Correction 256 PID Mapping for Each Port (TBD) Automatically Generated PSI/SI Table (TBD) WEB/Silverlight based Easy GUI via Web Compatible with Any Web-Browsers Modulation Parameter General Mode: Mode1 (2K), Mode2 (4K), Mode3 (8K) Mode Guard Interval 1/4 1/8, 1/16, 1/32 Coding Rate 1/4 2/3, ¾, 5/6, 7/8 Constellation DQPSK, QPSK, 16QAM, 64QAM Layer A, A+B, A+B+C Bandwidth 6MHz, 7MHz, 8MHz Modular Type Dimension Weight 300 x 180 0.46Kg Rack Server Type Power Requirements Power Consumption Weight Format Dimension(W x H x D) AC 85 ~ 286V 24W 4.5Kg 1RU rackmount, width 19” 483 x 1RU x 300 mm SFN Parameter Maximum Time Delay Off set Device ID 0ms ~ 1,000ms -1,000ms ~ +1,000ms 0 ~ 30 Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 27 DVB-T2 Gateway DMX-1908T2 Professional DVB-T2 Gateway Introduction Feature CASTWIN’s High-Performance DVB-T2 Gateway, DMX-1908T2 DVB/T2 Gateway is an ideal & costeffective solution for DVB-T2 transmitter/translator manufacturers and system integrators who want their own product range in any region or country where is adopting DVB-T2. • DVB-T2 MI Encapsulation Encapsulation into Base Band frames Full support of BB frame modes The DMX-1908T2 DVB-T2 Gateway encapsulates one or several MPEG-2 TS from DVB-T2 multiplexers into DVBT2 Base Band frames, and outputs the resulting DVB-T2 multiplex using the DVB-T2 MI (Modular Interface) protocol via ASI and IP. The DVB-T2 MI controls the modular parameters and provides the accurate timing and rate control required in a SFN network. It also supports MISO broadcasting to reinforce SFN performance and management of 8 PLP (Physical Layer Pipes) without any option. • Individual Addressing of DVB-T2 modulators MISO (Multi Input Single Output) support Peak to Average Power Ratio (PAPR) parameters Head Office / Laboratory • DVB-T2 MI interface to the DVB-T2 Transmitters L1 Signaling & SFN time stamp insertion. • Integrated SFN adopter Single & Multi PLP operation Mapping of input TS into individual PLPs • T2-MI Outputs Generation of T2-MI packets www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 28 DVB-T2 Gateway DMX-1908T2 Specification Input DVB-ASI input Ethernet Port (TBD) GPS 10MHz Reference Clock GPS 1PPS Signal SFN Parameter 8EA 2EA 1EA 1EA Output DVB-ASI Output 10MHz Loop Out Maximum Time delays Off Set 1PPS Time Reference Input 0ms ~ 1,000ms -1,000 ~ 1,000ms TS and System Monitoring 2EA 1EA Min/Max/Current Bitrate monitoring of Packets for Each Services Easy-to-use Web based GUI Monitoring ALL Input / Output and System Full SNMPv2 support TS Encapsulation in T2-M1 Packets General Single and Multi PLP NPD (Null Packet Deletion) ISSY (Input Stream Synchronization) Support Normal / High Efficiency Mode Modular Type Dimension Weight 300 x 180 0.46Kg Rack Server Type Power Requirements Power Consumption Weight Format Dimension(W x H x D) AC 85 ~ 286V 24W 4.5Kg 1RU rackmount, width 19” 483 x 1RU x 300 mm Common (L1-Signaling) Parameter Bandwidth 1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz, 10MHz FFT 1K, 2K, 4K, 8K, 16K, 32K Guard Interval 1/4 , 1/8, 1/16, 1/32, 1/128, 19/128, 19/256 Pilot Pattern PP1 ~ PP8 Preamble Format MISO / SISO Function to Modify DVB-T2 L1 - Signaling Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 29 Management System NMS Introduction Feature CASTWIN’s NMS offers optimized solution which is very adaptable for various devices. It provides user friendly interface and convenience in order to integrative manage the number of devices easily. Also, it offers Fast-analyzing function to respond for any occurred problem immediately. It uses convenient managing tool set so that it let users manage for CASTWINs. Additionally, it offers warning and notice solution for various cases. • • • • • • • • • • Realize high advanced network monitoring Monitoring operation status Convenient Tab for searching Sensing for any occurred problem from devices Management of error, function, solution Management of data upon occurred error, fluctuation Monitoring entire network of CASTWIN Prompt access via Web GUI Perfect and fast control Standard up-grade & maintenance Competitiveness • CASTWIN’s NMS offers optimized solution to prevent from inconvenience with un-necessary function, inaccurate data, bug etc after set-up. • CASTWIN’s NMS is much easier to use and install for users compared to other existing NMS. • Cost effective solution by easy installation and reduction of labor cost • Enable users to better manage the network and quality of service combined with lower operational costs Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 30 8-VSB Modulator DVM-1903ML Introduction AS a 8-VSB modulator, it is a professional performing product based on the 8-VSB(ATSC) modulation. It shows superior quality to modulate MPEG transport stream as DVB-ASI signal to 8-VSB(ATSC) and output as suitable frequency band for digital broadcasting transmission. Also, it is very easy to control with high class front VFD. Feature • • • • • • • • • • • • • ASI input transport stream Excellent RF output Supports 8-VSB(ATSC) modulation User adjustable output level and frequency Front panel control PCR Jitter: ≤ ± 200 ns Group Delay as ± 20 ns Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz Frequency: 54 ~ 1002MHz Output Level: 55±5 dBmV Spurious: ≤ -63dB MER After Equalizer: 42dB Highly Advanced fine-tuning Competitiveness • Retain your viewer with optimized modulator for ATSC(8-VSB) • Excellent coding as ITU-T(J.83) Annex D • Cost reduction for installing with simple set-up and operation • Stable output with Hybrid AMP integrated • Secure more space with compact and light weight design Specification Digital Input Transport Stream Connector Coding Bit Rate Packet Format Symbol Rate Modulation DVB-ASI BNC (75Ω) ITU-T (J.83) Annex D 19.393 Mbps 188Byte 10.762 Msymbol/s 8-VSB RF Output Frequency Range Impedance 54~1002MHz 75Ω Output Level Level Control Range Bandwidth MER After Equalizer MER Before Equalizer Phase Noise 50 ± 5 dBmV 0~-15dB 6MHz ≥ 42 dB ≥ 37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz Adjacent Channel Carrier Attenuation Characteristic Spurious Return Loss Group Delay Frequency Response Frequency Tolerance PCR Jitter ≥ 45 dB (Out-of-band) ≤-63 dB ≥ 17 dB ± 20ns ± 0.5dB ± 2ppm ≤ ± 200 ns General Power Requirements Power Consumption Weight Dimensions AC 90~230V, 50/60Hz 13W 3Kg 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 31 QAM Modulator DQM-1903ML Introduction AS a QAM modulator, it shows professional performance for received transport stream signal to output as frequency band for suitable CATV band transmission. It is also easy to select frequency band via front control panel. Feature • • • • • • • • • • • • • • ASI input transport stream Excellent RF output Supports QAM modulation Supports PCR re-stamping function User adjustable output level and frequency Front panel control QAM Modulation setting (64, 256QAM) PCR Jitter: ≤ ± 200 ns Group Delay as ± 20 ns MER After Equalizer: 42dB Phase Noise: VHF -105 dB@20KHz, UHF -103 dB@20KHz Frequency: 54 ~ 1002MHz Output Level: 55±5 dBmV Spurious: ≤ -63dB Competitiveness • • • • Hi-dense modulating for QAM(Annex A, B and C) Advanced coding as ITU-T(J.83) Annex A, B and C Cost effective with simple set-up and operation Hybrid AMP integrated Specification Digital Input Transport Stream Connector Coding Bit Rate Packet Format Symbol Rate Modulation ASI BNC (75Ω) ITU-T (J.83) Annex A, B and C 1~52 Mbps 188 Byte 1~7Mbps 64,256 QAM RF Output Frequency Range Impedance Output Level Level Control Range Bandwidth MER After Equalizer MER Before Equalizer Phase Noise Adjacent Channel Carrier Attenuation Characteristic Spurious Return Loss Group Delay Frequency Response Frequency Tolerance PCR Jitter 54~1002MHz 75Ω 50 ± 5 dBmV 0~-15dB 6MHz : Annex B and C 8MHz : Annex A ≥42 Db ≥37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz ≥ 45 dB (Out-of-band) ≤-63 dB ≥15 dB ±2 0ns ± 0.5dB ±2ppm ≤ ± 200 ns General Power Requirements Power Consumption Weight Dimensions AC 90~230V, 50/60Hz 13W 3Kg 482 x 44 x 383 mm Configuration Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 32 IP⇄ASI Converter DIC-500 Specification Introduction As a NEW released CASTWIN products, It is converts IP to DVB-ASI , or DVB-ASI to IP with GigE Interface. The IP Converter is a cost effective alternative to above both systems, as it connects digital video equipment to easy management. Also it is very easy to control with Hi-class front VFD. Feature • Received MPEG-2 or H.264 transport streams over Ethernetbased IP networks and converts them to DVB-ASI. • Received TS as ASI format and output to IP network • SMPTE-2022 • Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2 • Interchangeable plugs power adaptor clips US and EU type. (UK, AUS types are optional) • Inputs : 1 x DVB-ASI and 1 x GigE IP • Outputs: 1 x DVB-ASI and 1 x IP out • Support 7 IP from 1 TS • Support 270Mbpt/s bitrate of DVB-ASI • Support 1ms Latency of ASI to IP • Support IPv4 • Support Unicast and Multicast IP addressing KEY ATTRIBUTES GigE Port Physical Layer Data rate Connector IEEE 802.3a 10/100/1000 RJ-45 ASI Port Physical Layer Connector Ts bitrate DVB-ASI (coax) 75Ω BNC(2x) < 214 Mbit/s Transport TS per IP Encapsulation FEC 1~7 UDP or RTP SMPTE 2022 IP to ASI latency Jitter tolerance range 10ms 1~120ms CONTROL IP-address assignment Multicast support Front panel control DHCP or static IGMP v2 GENERAL Power Requirements Weight Dimensions(W x L x H) DC 5V 2A 0.5kg 148 x 170 x 35 mm Applications • Autonomous IP to ASI gateway • With DIC-500 Tunneling of ASI signals over LAN, WAN or the internet • Remote ASI output adapter for server based data inserters, stream servers, multiplexers and similar systems Head Office / Laboratory www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 33 Multi Digital Scaler DSR-1000 Specification Scalar Max Input Video Resolution Max Output Video Resolution Frame-rate-conversion 1920x1080@60p 1920x1080@60p 480i(29.9/30), 576i(25), 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) Video Input Introduction As a NEW released CASTWIN products, it is high performance Cross Converter which converts the signal from various inputting formats as HDMI, 3G/HD/SD-SDI, component, composite to various formats. Also, it is integrated with video processor which supports Selectable resolution and improvement for Image enhancing, Phase Noise, control of colors & Gamma. Analog Digital Resolutions Impedance Aspect Ratio Analog Digital Feature Inputs : HDMI, 3G/HD/SD-SDI, Component, Composite. Outputs : HDMI, 3G/HD/SD-SDI, Selectable Output Resolution: 480i, 576i, 720p, 1080i, 1080p HDMI, 3G/HD/SD-SDI supports 2 Channel Mini XLR audio inputs interface AES/EBU(BNC), Analog L/R audio input interface HDMI V1.4 standards support Upload and configuration via USB2.0 HDMI/SDI Dual Output Composite, Component HDMI, 3G/HD/SD-SDI 480i(29.9/30), 576i(25), 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) 75Ω 4:3, 16:9 Composite, Component HDMI,SD/SDI,3Gb/s SDI Audio Input Analog • • • • • • • • • Input Input Digital Input Frequency Range Impedance Connector Input Sampling Rate Connector Stereo 20Hz~20KHz 600Ω Mini XLR ASE/EBU, Embedded HDMI/SDI 32, 44.1 & 48 KHz HDMI-19PIN,BNC(75Ω) SDI Compliance Video Rates Data Rates Color Space SMPTE-259/272/274/292/296/299/424/425 4:2:2, 4:4:4 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s YUV HDMI Competitiveness • • • • Compact Size and Light Weight Low Cost & High performance Simply easy to use Fully compatible with all your SD and HD device. Color Precision Version 4:2:2, 4:4:4 V1.4 Standard Video Output Digital Output Impedance Aspect Ratio HDMI, 3G/HD/SD-SDI 75 Ω 4:3, 16:9 General Power Requirements Power Consumption Weight Dimensions Head Office / Laboratory DC 12V 1A 13W 0.74Kg 270x170x35 www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 34 HDMI to SDI Scaler DSR-500 HDMI to SDI Scaler Specification Scaler DSR-500 Max Input Video Resolution 1920x1080@60p Max Output Video Resolution 1920x1080@60p 480i(29.9/30), 576i(25), 720p(50/59.94/60) Frame-rate-conversion 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) Video Input Introduction As a NEW released CASTWIN products, it is high performance Cross Converter which converts the signal from various inputting formats as HDMI, 3G/HD/SD-SDI, component, composite to various formats. Also, it is integrated with video processor which supports Selectable resolution and improvement for Image enhancing, Phase Noise, control of colors & Gamma. Digital Input HDMI Resolutions 480i(29.9/30), 576i(25), 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) Aspect Ratio Color Precision HDMI Version 4:3, 16:9 4:2:2, 4:4:4 V1.4 Standard Audio Input Feature • • • • • Inputs : HDMI Outputs : 3G/HD/SD-SDI Selectable Output Resolution: 480i, 576i, 720p, 1080i, 1080p HDMI v1.4 standards Upload and configuration via USB2.0 Digital Input Sampling Rate Connector Video Output Digital Output Impedance Aspect Ratio Competitiveness • • • • Compact Size and Light Weight Low Cost & High performance Simply easy to use Fully compatible with all your SD and HD device. Embedded HDMI 32, 44.1 & 48 KHz HDMI-19PIN Compliance Data Rates Video Rates Color Space 3G/HD/SD-SDI 75 Ω 4:3, 16:9 SMPTE259/272/274/292/296/299/424/425 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s 4:2:2, 4:4:4 YUV General Power Requirements Power Consumption Weight Dimensions Head Office / Laboratory DC 12V 1A 13W 0.74Kg 270x170x35 www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 35 Multi Media Converter MMC-1000 Specification Video Input Analog Input Digital Input MMC-1000 Introduction As a NEW released CASTWIN products, It is the highly advanced multi media converter including SD/HD switching function. It shows best performance to convert from HDMI or SDI or Component or Composite to HDMI and SDI video out simultaneously with embedded HDMI and SDI audio. Resolutions Impedance Aspect Ratio Composite, Component HDMI, 3G/HD/SD-SDI 480i(29.9/30), 576i(25) 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) 75Ω 4:3, 16:9 Audio Input Analog Digital Input Frequency Range Impedance Connector Input Sampling Rate Connector Stereo 20Hz~20KHz 600Ω Mini XLR AES/EBU, Embedded HDMI/SDI 32, 44.1 & 48 KHz HDMI-19PIN,BNC(75Ω) SDI Feature • • • • • • • • Inputs : HDMI, SDI, Component, Composite Outputs : HDMI, 3G/HD/SD-SDI, AES/EBU(BNC) , Analog L/R audio input interface HDMI, 3G/HD/SD-SDI supports HDMI v1.4 standards support HDMI/SDI Dual output 2Ch Mini XLR Audio inputs interface Upload and Configuration via USB2.0 Competitiveness • Compact size and light weight • Simply easy to use • Fully compatible with all your SD and HD device. Compliance Data Rates Video Rates Color Space SMPTE-259/272/274/292/296/299/424/425 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s 4:2:2, 4:4:4 YUV HDMI Color Precision Version 4:2:2, 4:4:4 V1.4 Standard Video Output Digital Output Impedance Aspect Ratio HDMI, 3G/HD/SD-SDI 75 Ω 4:3, 16:9 General Power Requirements Power Consumption Weight Dimensions Head Office / Laboratory DC 12V 1A 13W 0.74Kg 270x170x35 www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 36 Media Converter ATS-500 Analog to SDI ATS-500 Introduction Specification It is highly performing Analog to HD/SD-SDI converter for converting from component or composite analog video signal to SDI with stereo audio. Video Input Feature Resolutions • Input : Component, Composite, Analog L/R • Output : HD/SD-SDI • Upload and configuration via USB2.0 Impedance Aspect Ratio Analog Input Composite, Component 480i(29.9/30) 576i(25) 720p(50/59.94/60) 1080i(25/29.97/30) 75Ω 4:3, 16:9 Audio Input Competitiveness • Compact size and light weight • Simply easy to use • Fully compatible with all your SD and HD devices. Analog Input Frequency Range Impedance Connector Stereo 20Hz~20KHz 600Ω 6.35mm Phone Jack Video Output Digital Output Impedance Aspect Ratio Compliance Data Rates Video Rates Color Space HD/SD-SDI 75 Ω 4:3, 16:9 SMPTE-259/272/274/292/296/299 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s 4:2:2, 4:4:4 YUV General Power Requirements Weight Dimensions Head Office / Laboratory DC 12V 1A 0.22Kg 110x90x28 mm www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 37 Media Converter STA-500 SDI to Analog STA-500 Introduction Specification Video Input It is superior to convert from SDI to Analog video out. Digital Input Resolutions Feature •Input : HD/SD-SDI inputs • Output: Component, Composite, HD/SD-SDI outputs • Stereo L/R Audio output, AESEBU output • Use with HD or SD Monitors Impedance Aspect Ratio Audio Input Digital Competitiveness • Compact size and light weight • Simply easy to use • Fully compatible with all your SD and HD devices. HD/SD-SDI 480i(29.9/30), 576i(25) 720p(50/59.94/60), 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30) 75Ω 4:3, 16:9 Input Sampling Rate Connector HD/SD-SDI(Embedded) 48KHz BNC (75Ω) Video Output Digital Output Analog Output Resolutions Output level Aspect Ratio HD/SD-SDI(Loop Through) Composite, Component 480i(29.9/30), 576i(25) 720p(50/59.94/60), 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30) 1.0 Vpp 4:3, 16:9 Audio Output Digital Analog Output Sampling Rate Output Frequency Range Impedance Connector AESEBU 48KHz Analog Audio 20Hz~20KHz 600Ω 6.35mm Phone Jack General Power Requirements Weight Dimensions Head Office / Laboratory DC 12V 1A 0.22Kg 110x90x28 mm www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 38 Media Converters STH-500 / HTS-500 SDI to HDMI HDMI to SDI STH-500 HTS-500 Introduction Introduction It is superior to convert from SDI to HDMI video out with embedded HDMI audio It is superior to convert from HDMI to SDI video out with embedded SDI audio. Feature Feature • • • • • Input : Embedded 3G/HD/SD-SDI Output : HDMI HDMI V1.4 standards SDI loop through output Upload and configuration via USB2.0 Specification Input Resolutions Impedance Aspect Ratio Video Input 3G/HD/SD-SDI 480i(29.9/30), 576i(25), 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) 75Ω 4:3, 16:9 Input Sampling Rate Connector Data Rates Video Rates Color Space SMPTE259/272/274/292/296/299/424/425 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s 4:2:2, 4:4:4 YUV Input Sampling Rate Connector Embedded HDMI 32,44.1,48KHz HDMI-19PIN Compliance Data Rates Video Rates Color Space SMPTE259/272/274/292/296/299/424/425 SD-SDI : 270Mbps HD-SDI : 1.5Gb/s & 3Gb/s 4:2:2, 4:4:4 YUV HDMI 4:2:2, 4:4:4 V1.4 Standard Color Precision Version 4:2:2, 4:4:4 V1.4 Standard Video Output HDMI 4:3, 16:9 General Power Requirements Weight Dimensions Aspect Ratio HDMI 480i(29.9/30), 576i(25), 720p(50/59.94/60) 1080i(25/29.97/30) 1080p(23.98/24/25/29.97/30/50/59.94/60) 4:3, 16:9 SDI Video Output Digital Output Aspect Ratio Resolutions Digital HDMI Color Precision Version Input Embedded SDI 48KHz BNC (75Ω) SDI Compliance Digital Audio Input Audio Input Digital Input : HDMI Output: 3G/HD/SD-SDI HDMI V1.4 standards Upload and configuration via USB2.0 Specification Video Input Digital • • • • Digital Output Impedance Aspect Ratio 3G/HD/SD-SDI 75 Ω 4:3, 16:9 General DC 12V 1A 0.22Kg 110x90x28 mm Head Office / Laboratory Power Requirements Weight Dimensions DC 12V 1A 0.22Kg 110x90x28 mm www.castwin.com #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] 39 Head Office / Laboratory #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea 135-920 Phone : +82 2 6005 9115 Fax : +82 2 3453 8338 E-mail : [email protected] www.castwin.com