Transcript
MPEG HD Mediaplex DMP-9624M
HD Encoder & Modulator Latency 800ms Chroma Depth 4:2:0 Resolutions 1080p
Introduction
Feature
DMP-9624M is the professional combination of ATSC(8-VSB), QAM or DVB-T/T2 Modulator and low 800 ms latency SD/HD Encoder with selectable support of MPEG-2 and MPEG-4 AVC (H.264) and audio encoding up to Dolby Digital (AC-3). DMP-9624M provides the superior-quality Constant Bit Rate (CBR) and Variable Bit Rate (VBR) video for variety of applications, while Hi-Class front panel guarantees easy set-up and control.
• • • • •
Competitiveness • Cost effective as integrated modulator and up-converter • Excellent option for operators who competitively pursue the best performing encoding device with high resolution • Best option for Real time encoding with low latency • Able to Secure space with Compact and light weight design • Make operators pay for less installing fee as offering Quick and easy setup
Component, Composite, HDMI and HD/SD-SDI video inputs Low latency as 800ms Up to 1080p Resolution Digital, Analog and SDI embedded audio inputs Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream • Provides internally generated PSI and PSIP • Various functions with integrated advanced Scaler • Control of Frame rate, Image enhance, Phase Noise, Correction of Color and Gamma • Selectable MPEG-2 HD or H.264 HD real-time video encoding • Integrated excellent IP converter • PCR Jitter : ≤± 200ns • Excellent RF output performance • Scaling function with integrated advanced Scaler • Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz • Frequency: 54 ~ 1002MHz • MER After Equalizer: 42dB
Options • • • •
Head Office / Laboratory #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea Postcode: 06222 Phone : +82 2 6005 9118 Fax : +82 2 3453 8338 E-mail :
[email protected]
QAM(Annex A, B and C) Modulation DVB-T Modulation Redundancy Dual Power Video Confidence Monitoring
www.castwin.com
22
MPEG HD Mediaplex DMP-9624M Specification Video Input Analog Digital
Input Input
Component , Composite HDMI , SDI
Resolutions
480i29.97/30, 576i25, 720p50/59.94/60, 1080i25/29.97/30 1080p25/29.97/30
Aspect Ratio
4:3, 16:9
Audio Input Analog
Digital Optical
Input Freq. Range Impedance Input Sampling Rate Input
1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω AES-EBU Embedded SDI/HDMI 32,44.1,48 KHz SPDIF(5.1 Channel) (pass through
ASI 1 Port 188 Byte
Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency
MPEG-2 HP@HL, MP@HL , MP@ML H.264 HP@L4 , MP@L3 MPEG-2 : 2~17.2 Mbps H.264 : 0.5~17.2 Mbps 4:2:0 CBR, VBR 800ms~
Audio Encoder Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2
Phase Noise
54~870 MHz 75 Ω 50 ± 5 dBmV 0 ~ -15 dB 42 dB 37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz
Adjacent Channel ≤ -45 dB (Out of band) Carrier/Attenuation Characteristic Spurious ≤ -63 dB Return Loss ≥ 17 dB Frequency Response ± 0.5 dB Frequency Tolerance ± 2 ppm Group Delay ± 20 ns PCR Jitter ≤ ± 200 ns TS Output
TS Input Transport Stream Packet Format
RF Output Frequency Range Impedance Output Level Level Control Range MER After Equalizer MER Before Equalizer
Transport Stream TS Bit Rate Packet Format Ethernet Interface Type Protocols IP TS Output Output Ethernet type Format IP Address Format TS Bit Rate TS Packet Rate
32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps
General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D)
ASI 1 port MPEG-2 : 3.4~19 Mbps H.264: 2.5~19 Mbps 188 Byte
10/100Base-T SNMP
1 Port 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 3.4~19 Mbps H.264: 2.5~19 Mbps 188 Byte
AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm
Configuration
Head Office / Laboratory #40-12 Teheran-ro 38-gil, Gangnam-gu, Seoul, Korea Postcode: 06222 Phone : +82 2 6005 9118 Fax : +82 2 3453 8338 E-mail :
[email protected]
www.castwin.com
23
