Transcript
Connect
1
Set up
2
Before connecting
A Finding the viewing channel
Select the most suitable connection (A or B or C) based on the type of device you have and your home set up. You can also refer to the accompanying User Manual for other possible connections.
A Press STANDBY-ON on the recorder. B Turn on the TV.
3 C Install the GUIDE Plus+ system 1. Which country do you live in?
Menu Language
Option B Connecting Recorder and Cable TV Digital TV antenna (optional)
Option C Connecting Recorder, TV and Cable Box/Satellite Receiver
Please select your language. Defines the languages of all on-screen menu displays.
English Dansk Español
Television (rear)
D
Philips Recorder (rear) DIGITAL ANTENNA INPUT
C
TO TV
TO TV
G-LINK
ANTENNA INTERCONNECT CABLE (OPTIONAL, REFER TO MANUAL)
DIGITAL ANTENNA LOOP THROUGH
EXT 1
TO VCR/SAT
TO TV
G-LINK
EXT 1
TO VCR/SAT
TO TV ANTENNA INPUT
HDMI OUT CVBS-OUT
ANTENNA INTERCONNECT CABLE (OPTIONAL, REFER TO MANUAL)
DIGITAL ANTENNA LOOP THROUGH
EXT 1
TO VCR/SAT
CVBS-OUT
Y
PB
S-VIDEO OUT
A Select the desired menu language, your country and
S-VIDEO OUT
AUDIO OUT
COAXIAL COAXIAL COMPONENT DIGITAL DIGITAL OUT VIDEO OUT IN
COAXIAL DIGITAL OUT
Philips Recorder (rear)
PB
COAXIAL COAXIAL COMPONENT DIGITAL DIGITAL OUT VIDEO OUT IN
TO TV
Philips Recorder (rear)
A Unplug the existing antenna cable from your TV and connect it to the DIGITAL ANTENNA INPUT socket on this recorder.
B Connect the Tuner interlink cable (supplied) between DIGITAL ANTENNA LOOP THROUGH and ANALOG ANTENNA INPUT sockets on this recorder.
C Connect the RF antenna cable (supplied) from the TO TV ANTENNA INPUT socket on this recorder to the Antenna In socket on the TV.
D Connect a scart cable (supplied) from the EXT1-TO TV scart socket on this recorder to the SCART socket on your TV.
E Plug in the power cable from the recorder to an AC
A
If you do not have an external receiver connected to the recorder, skip ‘D’ and go to ‘E’.
a TV channel.
B Press PAUSE LIVE TV to suspend it. C Press PAUSE LIVE TV again to continue. D To return to live broadcast, press LIVE TV.
Intuitive control wheel Rotate the control wheel on the remote control to skip backward/ forward within the TV programmes that have been tuned to and broadcast.
A To start external receiver setup, select ‘YES’ and
OPTICAL OUT
Note Press OK or the Green button on the remote control to go to the next screen.
B When the { Channel Search } menu appears, select the type of tuner to install and press the Green button.
Cable TV
Channel search Channel search installs Analogue and Digital TV channels. Antenna needs to be connected.
A Unplug the existing cable TV antenna from your TV and connect it to the ANALOG ANTENNA INPUT socket on this recorder.
G-LINK transmitter
E
Cable Box / Satellite Receiver (front)
B Connect the RF antenna cable (supplied) from the TO TV ANTENNA INPUT socket on this recorder to the Antenna In socket on the TV.
C Connect a scart cable (supplied) from the EXT1-TO TV scart socket on this recorder to the SCART socket on your TV.
D If you have a Digital TV antenna, connect it to the DIGITAL ANTENNA INPUT recorder (optional).
socket on this
E Plug in the power cable from the recorder to an AC power outlet.
power outlet.
A Follow steps 2~4 from type B connection. B Connect another scart cable (not supplied) to the EXT2-TO VCR/SAT scart socket on this recorder to the SCART (TO TV) socket on your Cable Box/Satellite Receiver.
D Connect the G-LINK cable to the G-LINK socket on this recorder.
Note No digital channels will be found if the digital antenna is not connected to this recorder.
Full installation Only Analogue TV Only Digital TV No TV install
Note If { No TV install } is selected, only recordings from external sources will be possible.
C Once complete, press the Green button to continue.
E Place the G-LINK transmitter in front of your Cable Box/Satellite Receiver near to its IR sensor.
brand name of the external receiver, followed by the recorder socket used to connect the external receiver (e.g. ‘EXT2’ for ‘EXT2-TO VCR/SAT’).
Press INFO to show or hide the Time Shift Buffer display Start time of the programme
Programmes stored in the ‘TSB’ Now
Note Press OK to go to the next screen. Select { None } if none of the entries are applicable.
C Once complete, turn on your external receiver and
22:04:30
Selected clips for recording
select channel number 02 on the external receiver.
D Read the instructions on the TV and press OK. E If the external receiver has switched to the same programme number as displayed on the TV, select { Yes } in the menu and press OK. Otherwise, select { No } and press OK to try a different code.
F Your external receiver is now installed, press OK to confirm.
Present time Current time of playback
Notes - Time Shift Buffer (TSB) is a temporary hard disk storage in your recorder. It stores and retains up to the last 6 hours of TV programmes when the recorder is turned on. - The contents in the time shift video bar will be cleared when you press STANDBY ON (2).
Time Time setting is required for making recordings. Time format is 24h (hh:mm)
00 : 00
C Connect an antenna cable (not supplied) from the ANALOG ANTENNA INPUT socket on this recorder to the Antenna Output socket on the Cable Box/Satellite Receiver.
press OK.
B Select the type of reception, service provider and
the TV shape.
TO VCR Y
AUDIO OUT
COAXIAL COAXIAL COMPONENT DIGITAL DIGITAL OUT VIDEO OUT IN
Cable Box / Satellite Receiver (rear)
L
PR
ANALOG ANTENNA INPUT
AUDIO OUT
B
C
R
TO TV ANTENNA INPUT
PB
HDMI OUT
EXT 2
ANALOG ANTENNA INPUT
L
EXT 2
Y L
S-VIDEO OUT
R
DIGITAL ANTENNA INPUT DIGITAL ANTENNA LOOP THROUGH
Use the recorder’s remote control and follow the onscreen instructions to complete the installation.
HDMI OUT CVBS-OUT
EXT 2
B Start initial installation
PR
ANALOG ANTENNA INPUT
PR
ANTENNA INTERCONNECT CABLE (OPTIONAL, REFER TO MANUAL)
Note If no or wrong postal code is entered, it will cause no GUIDE Plus+ (EPG) service information.
A Turn on your recorder and press P +/- to select
R
TO TV ANTENNA INPUT
DIGITAL ANTENNA INPUT
G-LINK
press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the menu. This is the correct viewing channel for the recorder.
z Follow the on-screen instructions to select your country and enter the postal code of your area.
D Install the external receiver
D
Antenna
B
Portugal Ireland Switzerland
Italiano Nederlands
Antenna (or Digital TV antenna)
Digital TV antenna
Netherlands Norway
Confirm the selection:
Français
C In case you don’t see the recorder’s setting menu, Television (rear)
Select your answer:
Finland Sweden United Kingdom
Deutsch
Norsk
Watch TV – Pause live TV Your Philips Recorder allows you to control the TV programme. You can PAUSE it as if you were in control of the live broadcast.
You should see the installation menu.
Option A Connecting Recorder and TV with antenna
Enjoy
E Load the TV listing data A Press GUIDE Plus+ (TIMER) to exit GUIDE Plus+
D Enter the correct time in the entry field, press the Green button to continue. Proceed the same for date entry.
E To continue with the GUIDE Plus+ installation, press OK. z Otherwise, press the Green button to skip.
LIVE TV
system. Leave the recorder in ‘standby’ mode and turn ‘on’ the external receiver overnight to collect the TV listing data, this may take up to 24 hours.
PAUSE LIVE TV
B Check the { Channel Mapping } at the GUIDE Plus+ Setup screen the next day to ensure the source and programme numbers are matching for all channels.
INFO TIMER GUIDE Plus+
3
Enjoy
Record to hard disk
Using the GUIDE Plus+ system
Record current TV programme A Press REC to start recording. It can record up to
Make sure that the GUIDE Plus+ TV listing data download is completed.
Select a play media
Copy files from USB
A Press HOME.
You can only copy the data files (MP3, WMA, DivX and JPEG) from your USB device to the recorder’s hard disk drive or recordable DVD.
A Press GUIDE Plus+ (TIMER).
6 hours. Note To set the recording time length, press REC repeatedly to extend the recording time in 30-minute increments, up to 6 hours.
It shows the list of TV programmes that are currently broadcast and the next 8 days of TV programmes.
Source Hard Disk
Content
Disc Tray
Video files
USB
Music
Recordings
front panel of the recorder.
Photo
B Press USB on the remote control. C Use the cursor keys to reach the file you want to copy.
press STOP.
B Select a media to play and press B right. to play and press u to start playback.
A Rotate the control wheel to search for the scene where you want to record.
B Press REC to mark the recording from here. C Rotate the control wheel again until you find the
Notes - Pressing the Red button on the remote control will cancel the recording. - A red mark appears indicating the marked portion. When the recorder goes into standby, the marked portion appears in the HDD as a recorded title.
Record
Channels
Home
B Press V down to select a TV channel. Notes – To see an overview of all the available channels, press the Yellow button on the remote control. – To go directly to the previous day’s or the next day’s TV listing, press . / >. – To scroll up or down a page, press P +/-.
C Press b left or B right to select a TV programme. D Press the Red button on the remote control to set
Play the recorded titles
Copy prohibited contents cannot be copied to this recorder.
A Insert a CD/DVD into the recorder. B Press HOME and select { Disc Tray }. C Use the cursor keys to reach the title/file you want
A Insert a recordable DVD into the recorder. B Press HDD LIST on the remote control. C Select a title to copy and press the Green button
Connect Set up Enjoy
What’s in the box?
to copy.
Copy recorded titles or files
Note You can store up to 25 programmes for recording.
HDD LIST
Copy files from Disc
{ USB } Access to the USB’s title list or contents.
on the remote control for { Copy }. Info
F Press OK again to start copying.
{ Disc Tray } Access to the disc’s title list or contents.
Copy recorded title from hard disk
1 2 3
Note If select { To Disc }, insert an empty recordable DVD into the recorder.
{ Hard Disk } The Hard Disk drive serves as a media jukebox that stores all sources of recordings (TV programmes, videos, music and photos).
the highlighted programme for recording.
A Press HDD LIST.
Title 1
D Press the Green button for { Copy }. E Select the destination for copying and press OK.
C Use the cursor keys to reach the title/file you want
Record a TV programme you have watched
scene where you want to stop recording, press STOP to mark it.
Quick Start Guide
A Insert your USB device to the USB socket at the
B To stop the recording before the scheduled time,
Titles
DVDR5520H DVDR5570H
Hard Disk / DVD Recorder
D Press the Green button for { Copy }. E Select the destination for copying and press OK. Note Only data files are able to copy to USB device.
F Press OK again to start copying. Hard Disk/ DVD Recorder
Remote Control and 2 batteries
USB
D The making disc copy information appears. Press the Green button again to start copying.
Title 2 Title 3 Title 4 Title 5
Delete
Copy
Time Date Genre
Note It is not possible to copy the TV recordings to USB device.
00:37:34 SP 07.07.2007 Others
Child Lock
Protect
REC
STOP HOME
B Press v up or V down to select a recorded title. C Press u to start playback.
User Manual
Need help? TIMER GUIDE Plus+
GUIDE Plus+ system Go to www.europe.guideplus.com
RF antenna cable (connect between recorder and TV)
User Manual See the user manual that cames with your Philips Recorder
Online Register your product and get support at www.philips.com/welcome
2007 © Koninklijke Philips N.V. All rights reserved. 12 NC 3139 245 28751 www.philips.com
Scart cable
Tuner interlink cable
G-LINK transmitter cable
