Preview only show first 10 pages with watermark. For full document please download

1 Features •incorporates Hd Base-t Technology •following North

   EMBED

Share

Transcript

Operating Instructions FEATURES •Incorporates HD Base-T technology •Following North American wall plate standard(2 Gang indoor outlet) •Full HD support: 1080p@60Hz@48 b/pixels, 4Kx2K and support 3D •Extends HDMI and IR up to 228 feet (70 meters) using one CAT5e (or better) cable •With Infrared control signal passing through function. •Supports high bit-rate audio formats (Dolby True-HD / DTS Master Audio) •Both inner and outer power connectors provided •UTP cable termination follows the standard of IEEE-568B. •CEC Pass-Through •DC 5V power supply •Compliant HDCP 1 Operating Instructions 2 Operating Instructions -5 to +35 C(+23 to +95 F) 5 to 90%RH (No Condensation) 300MHz/9Gbps Up to 1080P and 4Kx2k HDMI receptacle. RJ45 Power connector terminal Power DC receptacle IR Blaster 1080P 228FT/70m over single CAT5E/6 cable 110-240V/ 5VDC power supply 3Watts(TX),5Watts(RX) ABS fire retardant plastic W115.5xH114.5xT32.5mm (TX)120g,(RX)120g 3 Operating Instructions 4 Operating Instructions 7) Copy EDID function Copy the EDID of the sink which connected the OUTPUT1,it is suggested to put lowest or For example: One SDTV(480p) ,one HDTV(1080p), in order to make the 2 TV work, you need to put the SDTV is connected to the output 1 . RS-232 pin assignment Computer RS232 port HDBaseT Splitter PIN Assignment PIN Assignment 1 NC 1 NC 2 TX 2 RX 3 RX 3 TX 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9 NC 5 Operating Instructions 2 6 Operating Instructions 7 8