Transcript
1. Important Safety Instructions
2. Package Content
l Do not use the ADSL modem in high humidity or high temperatures.
ADE-3410 / ADW-4401
l Do not use the same power source for the ADSL modem as other equipment.
u ADE-3410 / ADW-4401 Unit
l Do not open or repair the case yourself. If the ADSL modem is too hot, turn off the power immediately and have it repaired at a qualified service center.
u Quick Installation Guide x 1
l Avoid using this product and all accessories outdoors.
u RJ-11 (ADSL) Cable x 2
l Place the ADSL modem on a stable surface.
u RJ-45 Cable x 1 u USB Cable x 1 (ADE-3410 only)
u CD-ROM containing the user’s manual x 1 u ADSL Splitter x 1 u Power Adapter x 1
l Only use the power adapter that comes with the package. Using a different voltage rating power adaptor may damage the router.
If any of the above items are missing or damaged, contact your local dealer for support.
–1–
–2–
ADE-3410
3. Hardware Installation Please connect the device to you computer as follow:
Phone Jack
Line
Splitter
l If connecting to the splitter, connect the “Line” splitter to wall jack using one telephone cable
Line
l Use another telephone cable to connect “MODEM” port of the splitter and “LINE” port of the modem. The “Phone” port of the splitter can be used to connect the telephone by a telephone cable.
RJ-11
Reset Power ON/OFF
RJ-45
Power Power Adpter
Modem Phone
PC Phone
Figure 1: ADE-3410 connection diagram
l Use Ethernet cable to connect “LAN” port of the modem and “LAN” port of your computer. Connect ADE-3410 to the PC’s USB port as follow:
Ethernet
USB
ADW-4401
Phone Jack
l Connect the USB cable to USB port of ADE-3410. The cable has two different connectors.
Splitter Line
l Connect the other end of the USB cable to PC’s USB port.
RJ-11
RJ-45
Power Power Adpter
Modem Phone
PC Phone
If do not need to connect to the splitter, Figure 2: ADW-4401 connection diagram
l Connect the modem to wall jack with a telephone cable. l Use Ethernet cable to connect “LAN” port of the modem and network adaptor of your computer.
Note
–3–
1. The ADE-3410 may connect via only USB or Ethernet. The preferred connectivity method is to use the Ethernet. If your PC doesn’t support Ethernet port, you need to use USB port and install additional software. 2. The default SSID of the ADW-4401 is “ADW4401”. –4–
4. Router Parameters Setting
After type right username and password, the following window will pop up:
Configuring computer network card IP address: Configure your network card’s TCP/IP properties to Obtain an IP address automatically from router, or set the computer’s IP with the same network mask of the router. (For example: Router’s default IP is 192.168.1.1 / 255.255.255.0) Then you can set computer’s IP to: 192.168.1.x / 255.255.255.0 (The range for x is from 2 to 254) Web setting interface: Open IE or Netscape Web browser, Input http://192.168.1.1 (Router default IP address) in the address column, then click button, access the following setting interface: Input user name and password, then click Login key to enter WEB setting interface. Default setting: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Username / Password: admin / admin
–5–
Figure 3: The main setup screen
5. Further Configuration The above steps introduce simple installations and configurations for ADE-3410 / ADW-4401. For further configurations of WAN, LAN, WLAN, NAT, Security, Routing, DNS, and DSL etc, please refer to the user’s manual in the CD. If you have further questions, please contact the local dealer or distributor where you purchased this product.
–6–
