Transcript
English
MO001/ MO001UK Sweex modem 56K PCI
Introduction First of all, many thanks for purchasing this Sweex modem 56K PCI. By means of this modem you can easily connect to the Internet via the telephone line. You can also use this modem to send and receive faxes. To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience problems during installation or operation of this product, go to www.sweex.com and look under the heading service & support.
Contents of the box Prior to installation, check if all required parts are present. The following parts must be present in the box: • 56K PCI modem • RJ11 telephone cable • CD-ROM with drivers • Manual If one of the above parts is missing, please contact the supplier.
Specifications • • • • •
32-bit PCI V2.2 and PCI bus power management interface V1.1 compliant Plug and Play Data transfer of up to 56 Kbps download and 48 Kbps upload Fax functionality at a speed of 14.4 Kbps Supports: Windows 98SE, 2000 and XP
Additional specifications • • • • • •
Data mode: TU-T V.92, V.90, V.34, V.32 bis, V.32, V.22 bis, V.22, V.23, V.21, Bell 212A and Bell 103 Data compression: ITU-T V.44, V.42 bis/MNP 5 Error correction: ITU-T V.42/MNP 2-4 Fax speeds: 14.k Kbps send and receive Fax modus: ITU-T V.17, V.29, V.27 ter, V21 Ch2, Group 3, Class 1 Voice mode: Telephone Answering Machine (TAM), DTMF detection & generation
Minimum system requirements • • • • •
Pentium I 100 MHz 32 MB of internal memory 10 MB of free hard disk space CD-ROM drive, Free PCI Slot Windows 98, Windows 2000, Windows XP
Installation Take the following precautionary measures prior to installing the hardware: Ensure that the PC is switched off and remove the feeder cable from the power supply. Also, disconnect the printer and monitor cables (they have their own power supply) to be absolutely sure that the PC is not live. Now unscrew the computer casing. After having unscrewed the computer casing, you must ensure that you are free of any static electricity. Do this by touching a (neutral) pipe of the central heating system or an unpainted water pipe. Please note that you must not use magnetic screwdrivers. Before you proceed any further, shortly touch the iron frame of the PC casing. Furthermore, make sure that you minimise contact with any contact points of the PC Card or the memory. Find a vacant PCI slot and remove the metal guard plate part of the computer casing in front of the relevant slot. On occasion the card does not allow to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot. Once the card has been successfully installed, check whether all other cards are still properly inserted in the PCI slots. It is possible that the other PCI cards are lifted up slightly when installing a new PCI card; as a result, the relevant cards or even the entire PC may no longer operate correctly. You can now replace the casing on the computer base and correctly reconnect all cables to and from the PC. Now switch on the PC again. Windows will automatically recognise the new found hardware. Click “cancel” in the “add hardware” box. Insert the installation CD in the CD-ROM drive, click “Drivers” and select the appropriate operating system. Now follow the on-screen instructions in order to complete the installation. Once installation is complete, the computer must be restarted before the modem is ready for use.
Warranty Any products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or (rechargeable) batteries included. Warranty claims are only settled via the dealer where the product concerned was purchased. The rightful owner has and retains title to all brand names and related rights mentioned in this manual.
1
