Transcript
8. Specification
6. Connection and operation HDMI EXTENDER RX RECEIVER
HDMI EXTENDER TX SENDER
HD CAMERA
SDI OUT
SDI IN FIBER OPTIC CABLE
TV
SDI HDbitT Fiber Optics Extender
Items
Discription
Transmit protocol
HDbitT
SDI signal format
SD-SDI，HD-SDI，3G-SDI
SDI rate
270Mb/s，1.485Gb/s，2.97Gb/s
SDI resistance
User Manual
75Ω SD-SDI signal : 480i@60Hz，576i@50Hz
IR OUT
IR IN
Support resolution
HD-SDI signal: 720P@50/60Hz，1080i@50/60Hz， 1080P@24/25/30Hz 3G-SDI signal: 1080P@50/@60Hz
7. FAQ Q: TV display “waiting for connection” on the bottom right corner?
Transmission distance
Extend resolution 1080p up to 20Km over single mode optical fiber cables
IR remote control
Support 20~60KHz IR remote control
Working temperature
0℃～60℃
Power supply
DC5V/2A *2pcs
Power consumption
TX<10W RX<10W
Product dimension
168x95x22mm (L×W×H) *2pcs
Product net weight
TX: 400g RX: 400g
Color
Black
A: Please check if the power supply of TX (sender) and the fiber optic cables are well connected.
Q: TV display “HDbitT Reminder : Please check the TX input signal”? A: 1) please check if there is an signal input of sender TX. 2) Tr y to connect the source device directly with display device to see if there is signal output from source device or change the source device and SDI cables to retest.
Q: Display not fluent and stable? 1) Press“reset”button on the TX/RX panel or reconnect power.
Disclaimer The product name and brand name may be registered trademark of related manufacturers.TM and ® may be omitted on the user manual. The pictures on the user manual are just for reference, and there may be some slight difference with the real products. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.
Thank you for purchasing this product. For optimum performance and
2. Features
safety, please read the instructions carefully and keep the manual for
1）Transmission over single mode optical fiber cables, plug and play
future reference.
2）Extend resolution 1080p up to 20Km
5. Panel description 5.1 SDI Extender TX transmission
3）Support IR pass back and remote control conveniently 4）Avoid the electromagnetic interference in environment for long
• Important safety notice Please read below safety instructions carefully before installation and operation:
distance transmission 1
5）Low signal loss, wide frequency band and strong anti-interference 6）Aluminium heat sink shell
* Please pay attention to all the warnings and hints on this device.
3
* Do not expose this unit to rain, moisture and liquid.
5
3. Package contents
* Do not put any stuff into the device.
2
3
4
5
Power input (DC5V)
2
Reset button
IR blaster extension cable port Fiber optic signal send port
4
SDI signal input
Power input (DC5V)
2
Reset button
IR receiver extension cable port Fiber optic signal receive port
4
SDI signal output
5.2 SDI Extender RX receiver
* Do not repair or open this device without professional people's guidance. * Make sure good ventilation openings to avoid product overheating damage. * Shut off power and make sure environment is safe before installation. * Do not plug-in/out the network cables and IR cables when it is in
SDI extender TX*1pcs
SDI extender RX*1pcs
DC5V2A*2pcs 1
using to avoid cables damage. * Use DC5V only. Make sure the specification matched if using 3 rd party DC adapters.
3 IR OUT
IR blaster extension cable*1pcs
IR IN
IR receiver extension cable*1pcs
5
2
3
4
5
User's manual*1pcs
5.3 Front Panel of TX and RX
1. Introduction SDI HDbitT fiber optics extender, supports HDbitT transport protocol, extends SDI signal up to 20Km between the source device and display device over optical fiber cables. It supports IR pass-back. This product is perfect for long distance transmisson field.
4. Installation Requirements 1.SDI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc)
1
2.SDI display device like SDT V, HDT V, and projector with HDMI por t. 3.Cables(SDI cables and single mode optical fiber cables)
3
2
3
Power status indicator Data transmission indicator Network connection indicator 2
