Transcript
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Band saw (Rockwell)
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Disc and Belt Sander (Aceti)
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Belt Sander-Polisher
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Grinder-Buffer
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Melting Furnace
Equipment Location:
Foundry Studio Room 152d
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
Breaker box
Plastic breaker adaptor
Stop machine, flip the breaker and install plastic breaker adaptor and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Polishing Lathe
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Sand Blast Cabinet
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
Breaker box
Plastic breaker adaptor
Stop machine, flip breaker switch to the off position, install plastic breaker adaptor, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Slurry Mixer
Equipment Location:
Foundry/Mouldmaking Studio Room 152b
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
TIG Welding machine
Equipment Location:
Foundry Studio Room 152e
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
Local disconnect
Padlock
Stop machine, flip breaker switch and install lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
1. LOTO Procedure LOCKOUT TAGOUT PROCEDURE
Equipment Identification
Equipment Name/Description:
Wax Melting Pot
Equipment Location:
Foundry Studio Room 152
Total # of Energy Isolation Devices/locks:
1
NOTICE
BEFORE SERVICING THIS MACHINE , NOTIFY AFFECTED PERSONNEL. ONLY PROPERLY TRAINED AND AUTHORIZED PERSONNEL SHALL PERFORM LOCKOUT TAGOUT PROCEDURE
Energy Source
Location
Type of EID/lock to be used
Steps for locking & tagging
Verification Procedure
Electrical
End of cord
Plastic clamshell and padlock
Stop machine, unplug cord, and install clamshell, lock, and tag.
Attempt to start machine, visually confirm it will not start.
IF SYSTEM CANNOT BE LOCKED OUT OR IF SYSTEM FAILS VERIFICATION PROCEDURE, STOP & CONTACT YOUR SUPERVISOR *
LOTO Procedure # A-xxxxxxx
Revision #:
Approved by:
Date:
