Transcript
FCC Warning
1 port Power Injector User’s Manual
This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the user’s manual, it may cause interference in which case users will be required to correct interference at their own expenses.
CE Warning This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Introduction This device consists of 1 PSE/PoE ports. That can solve the limitation of the power outlet location and offer the system designer a flexible solution to locate the network device everywhere. The compact rigid desktop size was specifically designed for small to medium workgroups. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.
Package Contents Before you start to install this switch, please verify your package that contains the following items: One PoE Fast injector One power adapter One User’s Manual
Product Features 1 Port PSE/ PoE function, 48V output Supporting the power up to 24W on PSE/PoE port Providing 1 10/100Mbps switching ports Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100BaseTX, Filtering/Forwarding Rate: 100Mbps/144,400pps; 10Mbps/14,440pps Supports packet length 1600 bytes Status LEDs: System Power, Network Transmission Media: 10Base-T Cat. 3, 4, 5 UTP/STP; 100Base-TX Cat. 5, 5e UTP/STP Power
DC 48V input
Power output pin: 1&2(+) 3&6(-) Operating Temperature: 0℃ ~ 50℃ Storing Temperature: -20℃ ~ 90℃ Humidity: 10% ~90% RH (Non-condensing) Dimension (L x W x H): 70mmX63mmx24mm Weight: 52g Note: If any of these items is found missing or damaged, please contact your local supplier for replacement.
Safety & EMI Certificates: CE & FCC Smart plug & play
Front Panel (LEDs)
Rear Panel (Power)
LED Indicators of 1 Port 10/100M PoE injector
DC input
LED Power
Status On Off
Description Power is on. Power is off.
Connections PD device to this 1 Port PoE injector This device provides automatic detection functionality for PoE power supply. Remote support power PD device up to100M from PSE port. Using Cat. 5 twisted-pair cable to connect Power Device to the PSE port of this injector, and then this switch will supply 48V power to Power Device over Cat. 5 twisted-pair cable. Please be noted Power Device should also comply with IEEE 802.3af.
Technical Specifications Standards
Features
Filtering/ Forwarding Rates Transmission Media LED Indicators Power Input Power Output Power Consumption Dimensions Weight Operating Temperature Storage Temperature Humidity Certifications
PoE Injector Number of Ports: 1* RJ45 connector: Data input port 1* RJ45 connector: Data + power output port 100Mbps port – 144,400pps 10Mbps – 14,440pps 10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5, 5e UTP/STP per Unit: Power DC 48V 48V Per Port Output – 24 W Max on POE Port 2 Watts 70 x 63 x 24 mm (L x W x H) 52g 0 to 50℃ -20 to 90℃ 10 to 90% RH (non-condensing) FCC Class A, CE
DC 48V input
