Transcript
1. Preparations
2. Connecting units and cables
1.1 Checking contents
1.2 Preparing for set-up
The package includes:
1
R
ETHER ETHER NET 1 NET
2 PHONE
DSL
INTER NET
2
Modem (router) with power supply unit
3 Ethernet cable (yellow)
Do not begin the installation of the new modem until after the connection date. You have been notified of this by letter. If you > Already possessed a fast Internet connection (ADSL, DSL or similar), proceed with Step 3. > Did not previously possess a fast Internet connection, go directly to Step 4.
Note: The telephone sockets can differ in appearance.
Computer Microfilters Note: You need a microfilter (with the Swisscom logo) for every telephone in your home.
Remove > The old modem > The old power supply unit (if present) > The old modem cable (violet) > And all old microfilters
Telephone
You can return the old units to any Swisscom shop. Modem cable (violet)
4 5 6
2 microfilters (with Swisscom logo)
7
Switch your computer off.
1
4 7
Telephone
Wait until at least the following lamps light up on the modem: > «Power» > «Ethernet» (one of the two lamps) > «DSL»
2
5 8
0
ETHERN ETHERN ET 2 PHONE ET 1
DSL
INTERN
ET
3 6 9 R
Note: In the event of problems, please refer to the «Troubleshooting» section on the back of this manual.
Modem
10 Check whether your telephone is working. Can you hear a dialling tone?
Unplug all telephones. DSL
Choose the telephone socket to which you wish to connect your modem. This is normally the telephone socket closest to your computer.
9
First switch the modem on and then the computer.
POWER
cable
Modem cable (violet)
POWE
8
Telephone sockets
> Nur auf Anw Swisscom eisung von > Ôter uniq entfernen. uement sur instructio ns > Rimuover de Swisscom. e solo su instruzion > Only remoe di Swisscom. ve when instructe by Swisscom PHOdNE
2
<...>
ETH ERN ET
1
RES ET
POW ER
8 OFF / ON
11 If you
OF F / ON
Power supply unit
Ethernet c able (yello w)
Connect the units and cables supplied as shown in the illustration on the right. Note for 4-pole telephone sockets: Connect the microfilter using an adapter (available from any Swisscom shop). Do not plug telephones or fax machines into the second connection of the adapter.
4-pole telephone socket Adapter
Manual Microfilter
Note: In the event of problems, please refer to the «Troubleshooting» section on the back of this manual.
> Are a new Swisscom DSL customer you still need to enable your Internet connection (registration). Follow Section «3. Registering DSL by Swisscom» on the back of this manual. > Are an existing Swisscom DSL customer (DSL customer or Bluewin TV customer), you can now use the Internet.
Troubleshooting
For new Swisscom DSL customers only:
3. Registering DSL by Swisscom 1 2
Start your browser (Internet Explorer
, Firefox
, etc.).
The DSL registration page appears automatically in your browser. You will be guided through the registration process step by step. Complete all compulsory fields. If a progress bar is displayed, wait until this process has finished and then continue with registration. Note: If neither the registration page nor a progress bar is displayed, access the registration page by entering «www.swisscom.ch» in the address field of your browser and pressing the Enter key . Then continue with the registration.
3
, Safari
> Is the «Power» lamp lit on the modem? POWER
ETHERN ETHERN ET 2 PHONE ET 1
DSL
INTERN ET
No > Check whether your modem is switched on (Step 8). No > Check the power supply unit and mains connection (Step 7). > Is the «DSL» lamp lit on the modem? POWER
ETHERN ETHERN ET 2 PHONE ET 1
DSL
INTERN ET
Setting up Internet Ethernet router
No > The DSL line is faulty or not yet connected. > Check the cabling between the modem and telephone socket (violet cable). > Check the connection date for the DSL connection in one of the letters you have received from Swisscom. > Is at least one «Ethernet» lamp lit on the modem?
At the end of the registration process, print out the datasheet and enter your Swisscom login data here: Username: __________________________ Password: ___________________________
POWER
ETHERN ETHERN ET 2 PHONE ET 1
DSL
INTERN ET
No > Check whether your computer is switched on (Step 8). No > Check whether your computer is correctly connected to the modem (Step 7). > Have you used a white microfilter (with Swisscom logo) for every telephone in your home? No > Use a white microfilter (with Swisscom logo) for every telephone.
> Are you using the modem cable (violet) supplied? No > Use the cable supplied.
> Is your Internet access now working? No > Contact us on the freephone number 0800 800 800. Note: If you run into problems during set-up that you cannot resolve even using these instructions, please contact the freephone number 0800 800 800.
Swisscom (Switzerland) AG Hardturmstrasse 3 PO Box 756 CH-8037 Zurich Freephone number: 0800 800 800 www.swisscom.ch SAP 10004812 06/09
