Transcript
SMATE Theatre Series Soundbar USER MANUAL
MODEL NO.:SM2SB5.1TH150KINMA
Note:Please read the instructions carefully before operating the set and retain it for further reference.
Content Safety Precautions ------------------------------------------------------------ 01 Important Safeguards -------------------------------------------------------- 02 Speci cation -------------------------------------------------------------------- 03 Power Switch ------------------------------------------------------------------- 04 Front Control Panel ------------------------------------------------------------ 04 Remote control ----------------------------------------------------------------- 05 Ampli ed board ---------------------------------------------------------------- 06 USB Operation ------------------------------------------------------------------ 06 Bluetooth Operation ---------------------------------------------------------- 07 Aux Operation ------------------------------------------------------------------ 08 Subwoofer Output Operation ---------------------------------------------- 09 5.1CH/AC-3 Operation ------------------------------------------------------- 10 Wired Mic Operation ---------------------------------------------------------- 11 Optical Operation ------------------------------------------------------------- 12 Coaxial Operation ------------------------------------------------------------- 13 HDMI Operation --------------------------------------------------------------- 14 Installation Steps -------------------------------------------------------------- 15 Accessories ---------------------------------------------------------------------- 16 Trouble Shooting -------------------------------------------------------------- 16 Installing Batteries to the Remote Control ------------------------------ 17 Support -------------------------------------------------------------------------- 18
Safety Precautions
A. Please do not open the back cover or the soundbar cover. The lighting flash symbol is to alert the user to the presence of uninsulated "dangerous voltage" within product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Please refer to qualified service personnel with any issues. B. Please protect the power cord and plug. Avoid high pressure, force, pulling or pushing of the power cord/plug. C. The product is designed for indoor use only. Please do not place the product in windy, sunny or heat emitting surrounds. Please do not place the product in a sealed box without any ventilation. Ventilation is required for preventing excessive heat and any damage to the unit from it. D. Slots and openings in the unit cabinet are provided for ventilation and to ensure reliable operation of the product preventing any damage from excessive heating. The openings should never be blocked. E. To prevent fire or shock hazards do not expose the apparatus to rain or liquids or any external materials. No filling of external substances should be allowed at anytime. F. The product is designed to Australian Standards for operation and safety. Please ensure the input voltage is AC 240V/50Hz. If you are unsure about the power supply please consult your dealer or local power company.
01
Important Safeguards 01. Read Instructions-All the safety and operating instructions should be read before the appliance is operated. 02. Read Instructions-All the safety and operating instructions should be retained for future reference. 03. Follow Instructions-All operating instructions should be followed. 04. Heed Warning-All warnings on the appliance and in the operating instructions should be adhered to. 05. Power Source-The appliance should be connected to power supply for only the type specified in the operating instruction or as marked on the appliance. 06. Power Cord Protection-Power supply cords should be routed such that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance. 07. Water and Moisture - The appliance should not be exposed to water, rain or moisture to prevent fire or shock hazards. No filling of liquids should be allowed at anytime. 08. Ventilation-The appliance should be situated so that its location or position does not interfere with its proper ventilation.Do not use the appliance on a bed,sofa,rug or similar surface that may block the ventilation openings. 09. Heat-Keep the appliance away from heat sources such as radiators, heat registers,stoves, or other appliances (including amplifiers) that produce heat. 10. Non-use Periods-The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 11. Damage Requiring Service-The appliance should be serviced by qualified service personnel only when: a. The power-supply cord or plug has been damaged. b. Objects have fallen or liquid has been spilled into the appliance. c. The appliance has been exposed to rain. d. The appliance does not appear to operate normally or exhibits a marked change in performance. e. The appliance has been dropped , or the enclosure damaged. 12. Servicing-The user should not attempt to service the appliance beyond that specified in the operating instruction.All other servicing should be referred to qualified service personnel. 13. Clean only with dry cloth. 14. Unplug this apparatus during lightning storms or when unused for long period of time.
02
Specification Rated Power:150W(20Wx5+50W) Input Voltage:AC 110-240V 50/60Hz S/N RATIO:>86dB THD(1KHZ,1W):<0.1% Sensitivity:88dB Speaker Drivers: FR/FL:(3"x2+1")x2 CEN: 3"x2+1" SR/SL: (3"x2 )x2 SUB: 5.25"x2 Frequency response:85Hz~20KHz (40Hz-250Hz for sub) Product size:1098x236x165mm
The soundbar is designed with patented technology: With patented loudspeaker phase control technology, SMATE sound bar subwoofer is designed to operate at low-frequency which produces punchy bass. The centre and front loudspeaker are designed to operate on full-frequency range which produces the centre and front channel sounds. The surround sound loudspeaker is designed to operate on full-frequency ranges and its phase control crossover to the centre & front phase control enhances the surround sound effect. Meanwhile the soundbar built-in controller and audio control circuit board is designed so all the functions can be controlled by the front panel or remote control. This product complies to AS/NZS, CE & RoHS standards
03
Power Switch
** The soundbar power switch is located under the LED display panel as shown in the picture above. When turned on the display will light up automatically.
OFFON
Front Control Panel
1. LED display 2. Remote Control Receiver 3. USB Input 4. Master Volume5. Power (Standby/On) 6. MENU (Control each channel volume separately)
7. Previous channel/ previous song 8. Memory indicator (for pre-setting the volume level) 9. Master Volume+ 10. INPUT(Change input signal sources) 11. Next channel/ next song 12. Play/Pause
04
Remote control
1. STANDBY
11. INPUT(change input signal sources)
2. CH.MODE(2.1ch/5.1ch mode)
12. NEXT CHANNEL+
3. MASTER VOLUME+
13. PLAY/PAUSE
4. PREVIOUS CHANNEL-
14. SURROUND VOLUME+
5. MASTER VOLUME-
15. CENTER VOLUME+
6. SURROUND VOLUME-
16. SUBWOOFER VOLUME+
7. CENTER VOLUME-
17. MUTE
8. SUBWOOFER VOLUME-
18. MIC VOLUME+
9. MIC VOLUME-
19. MIC VOLUME SETTINGS(set up echo or volume)
10. MEMORY
05
Amplified board 01
08
02
09
03
10
04
05
06
07
11
01. HDMI Output
07. Power Input
02. HDMI 2 Input
08. MIC 1 Input
03. HDMI 1 Input
09. MIC 2 Input
04. Active Subwoofer Ouput
10. OPTICAL Input
05. AUX Input
11. COAXIAL Input
06. AC-3/5.1CH Input
USB Operation
1. Turn on the power switch 2. Select USB function by pressing the "INPUT" button 3. Plug the USB flash drive to the USB port USB Ports
4. The USB mode supports most mainstream audio file formats like MP3/ WMA/ APE/ FLAC
06
Bluetooth Operation
Mobile Phone
iPad
1. Select the input to "Bluetooth" mode 2. Enable bluetooth mode on your device and search for bluetooth device "KINMA9" and select for connection 3. No password is required for connection 4. A beep sound from the soundbar will confirm the device is connected successfully 5. You may now listen to your preferred content/music from your device
07
Aux Operation 3.5mm/2 rca cable audio cable
2 RCA to 2 RCA cable audio cable
1. Connect your device with the soundbar via RCA cable as per any of the two methods shown above in the picture 2. Change "input" to "AUX" 3. Adjust volume for each channel separately 08
Subwoofer Output Operation
1. Connect active subwoofer input to the soundbar SW OUT port via RCA cable as per the connection diagram shown above
09
5.1CH/AC-3 Operation
1. Connect your device with the soundbar by RCA cable as per the picture shown above 2. Change "input" to "5.1" 3. Adjust the volume for each channel separately
10
Wired Mic Operation
MIC input jack
6.5mm Wired Microphone
Wireless Microphone receiver
11
Optical Operation
Player device
Optical audio signal cable
1. Connect your device with Optical cable to the ports marked OPTICAL as per above picture 2. Change "input" to "OPT" 3. Adjust the volume for each channel separately
12
Coaxial Operation
Player device
Coaxial audio signal cable
1. Connect your device with Coaxial cable to the ports marked COAXIAL as per above picture 2. Change "input" to "COAX" 3. Adjust the volume for each channel separately
13
HDMI Operation
HD Player
TV
HDMI OUTPUT HDMI INPUT
1. Connect your device with HDMI cable as per above picture to external device or TV 2. Change "input" to "ARC” 3. Adjust the volume for each channel separately Please note: 1) Connect a suitable ARC enabled HDMI cable to ARC enable HDMI port on your TV. Please turn on/enable the ARC function on your TV 2) When connecting other HDMI devices to the soundbar input, please select relevant source HDMI from TV (which is connected to the soundbar) and change soundbar input to relevant HDMI source (HDMI 1/2) 3) Depending on your TV model & settings you may find all sound defaults to the soundbar and you may or may not be able to use TV remote control for controlling the sound. Use soundbar remote for controlling the sound, if all sound defaults to the soundbar and TV remote is not usable for controlling sound.
14
Installation Steps There are two options for installation of the soundbar unit as per below. Option 1: Mounting on the wall Option 2: Installing on a TV stand/ Entertainment unit
Wall mounting installation steps: 1. Mark mounting distance appropriately on the wall 2. Drill the holes & fix the mounting bracket (as supplied to the wall) 3. Screw the mounting plate to the soundbar (if not pre-fitted) 4. Mount the soundbar to the installed brackets on the wall Note: Please ensure its a two person lift to prevent any injury or harm to yourself or damage to the soundbar Please contact us at
[email protected] for professional installation of your soundbar ensuring best audio experience
15
Accessories 1. Manual x1 2. RCA cables x2 3. Optical cable x1 4. HDMI cable x1 5. Remote Control x1 6. Power Cord x1 7. Screws x1 set
Trouble Shooting PROBLEM
MODIFIED METHODS Check whether the power cord is loose or not
NO POWER Check whether the socket is working or not No Sound
Check”INPUT”signal source The remote control is too far away from the speaker. Operating the remote control within 7m
The remote control doesn't working properly
There is am obstacle between speaker and remote control.Remove obstacle The battery of remote control runs out. Replace this with new battery
16
Installing Batteries to the Remote Control Please insert AAA batteries into the remote control. Make sure the (+) side and the (-) side are installed correctly. When you are installing the battery, the remote's backside should be facing up. After installing the batteries correctly, please re-attach the battery cover. Please note: * Only use AAA batteries. * Inserting the batteries incorrectly may also result in cracking or leakage that may pose a ire risk or lead to personal injury. * Dispose the batteries in accordance with local laws and regulations. * Keep the batteries away from children and pets. * If the remote control is not used for a long time, remove the batteries. * Keep the remote control away from moisture, sunlight, and high temperatures.
Using the Remote Control * To use the remote control, point it towards the remote sensor at the front of the soundbar. * The remote control has a range of up to approximately five metres (7m) from the soundbar at an angle of up to 30 degrees each to the right and left of the sensor. * The remote control will not operate if its path is blocked. NOTE: * Do not drop, step on or otherwise impact the remote control as this may damage the parts or lead to a malfunction. * The operating distance may vary according to the brightness of the room. * Do not point bright lights at the remote control sensor. * Do not place objects between the remote control and the remote control sensor. * Do not use this remote control while simultaneously operating a remote control of other devices. Remote Control Preparation * Install the batteries in the back of the remote control, ensuring to match up the polarity markings (+/-). * The batteries should last for around one year. The service life of the batteries will depend on how often they are used. * If the remote control does not work when operated near the soundbar, replace the batteries. NOTE: * Remove the batteries if the remote control is not going to be used for a long time.
17
Support The following terms and conditions relate to the warranty of Smate products purchased within Australia ONLY. Consumer product warranty When you purchase a Smate product, you have the peace of mind in knowing that your product is covered by Smate's Standard Warranty. The Smate Standard Warranty is provided by Smart Group Technologies Australia PTY. LTD. (ABN 89 603 849 565). General terms and conditions 1.1 The benefits given to you in Smate's Standard Warranty are in addition to other rights and remedies you have under law in relation to the products to which Smate's Standard Warranty relates. The following statement only applies to Australian purchases: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 1.2 Subject to section 1.1 and the terms below, as your Standard Warranty Smate agrees to repair or replace at Smate's cost the Smate product, and any Smate accessory supplied with the product, purchased by you in Australia from Smate's website or from a Smate Authorised Dealer when the product does not perform in accordance with the manufacturer's specifications during the Warranty Term specified for the product in the warranty 'Table 1', commencing from the date of purchase. Special Conditions apply under the Standard Warranty to some products as identified in Table 1. 1.3 To make a claim under the Standard Warranty you will need to: a) provide proof of purchase to Smart Group Technologies Australia showing the date of purchase of the products, provide a description of the Products and the price paid for the Products by sending written notice to Smart Group Technologies Australia at PO BOX 201, Seven Hills, NSW 1730, Australia or by lodging an online claim by filling out the contact us form or by email at
[email protected]. 1.4 Where the Warranty Claim is accepted then Smart Group Technologies Australia will, at its sole discretion, either repair or replace any defective Products or part thereof with a new or remanufactured equivalent during the Warranty Period at no charge to you for parts or labour. You acknowledge and agree that you will be solely liable for any postage or shipping costs incurred in facilitating the Warranty Claim. 1.5 If the product presented for repair is capable of retaining user-generated data, you are advised that repair of the product may result in loss of the data. 1.6 The product will be at the owner's risk whilst in transit to and from the Smate Authorised Service Centre, unless transported by Smate or its Authorised representatives. 1.7 Smate will bear the expense of transport where transported by Smate or its Authorised representatives. Any other expense of claiming the warranty will be borne by you. 1.8 Smate and its Authorised Service Centres may seek reimbursement of any costs incurred by them when the product is found to be in good working order.
18
Support General exclusions and limitations 2.0 To the full extent permitted by law, but subject always to 1.1, the Standard Warranty will not apply: 2.1 If the product has not been installed, operated, maintained or used in accordance with the manufacturer's instructions or specifications provided with the product. 2.2 If the factory-applied serial number has been altered or removed from the product. 2.3 To damage, malfunction or failure resulting from alterations, accident, misuse, abuse, fire, liquid spillage, mis-adjustment of customer controls, use on an incorrect voltage, power surges and dips, thunderstorm activity, acts of God, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories, the operation of a computer virus of any kind, exposure to abnormally corrosive conditions or entry by any insect, vermin or foreign object in the product. 2.4 To damage arising during transportation, installation or while moving the product, or to any transportation costs of the product or any parts thereof to and from the owner, unless otherwise specified in these Warranty Terms. 2.5 To any third-party software or hardware not contained in the product as originally configured by the manufacturer. 2.6 To any failure, to the extent that the failure is not a failure of the product to perform in accordance with its specifications. 2.7 To service of any product whilst it is outside Australia. 2.8 To any wear and tear if the product is used in commercial, industrial, educational or rental applications. 2.9 To the normal incidence of off-coloured or dark pixels in LCD and LED screens as described in the User Manual for the product. Smate will only repair or replace the product if there are (a) 8 or more dark pixels in the screen (unless 2 or more are adjoining dark pixels) or (b) 2 or more bright pixels in the screen. 3.0 To the full extent permitted by law but subject always to section 1.1: 3.1 Smate will not be liable for any loss, damage or alterations to (1) third party hardware or software; or (2) programs, data or information stored on any media or any part of the product, no matter how occurring; or (3) for any loss or damage arising from loss of use, loss of profits or revenue, or for any resulting indirect or consequential loss or damage. TABLE 1 - Consumer Standard Warranty Terms and Special Warranty Conditions PRODUCT All Smate products except as listed below
WARRANTY TERM
SPECIAL WARRANTY CONDITIONS
1 Year
For Service - Except as listed below, return to Smate Authorised Service Centre.
SMATE LCD/LED Television
2 Year
On-site Service/Pick up for 40"(101cm) and above within 25km of Smate Authorised Service Centre. For 39" and below, For Service - Return to Smate Authorised Service Centre.
SMATE Personal Audio – Headphones
2 Year
19
WARRANTY CARD Dear customer Thank you for purchasing product, Your product is under warranty in accordance with terms and conditions stated herein. 1. Your units and components contained therein are warranted against defective material and workmanship for a period of 12 months from the date of purchase. 2. To obtain warranty protection,notice of alleged defect must be given promptly upon discovery and warranty card must be presented along with proof of date of purchase to our service personnel at the time of service. 3. The company decision on identification of the defects due to faulty/defective spare parts or faulty workmanship or misuse/abuse shall be final and you shall agree to abide by such decision. 4. The defective parts/material shall be replaced with a functionally working equivalent part/material and defective part/material will become the property of the company.
CUSTOMER COPY Product: ....................................................... Model No.: ..................................................... Serial No.: .................................................... Date of Purchase: ......................................... Buyer Name and Address: ..................................................................................................... ................................................................................................................................................. Dealer Name and Address: .................................................................................................... .................................................................................................................................................
Dealer stamp
SERVICE CENTER COPY (To be eligible for warranty send this copy to the company through the dealer) Product: ....................................................... Model No.: ..................................................... Serial No.: .................................................... Date of Purchase: ......................................... Buyer Name and Address: ..................................................................................................... ................................................................................................................................................. Dealer Name and Address: .................................................................................................... .................................................................................................................................................
LIMITATIONS OF WARRANTY ● Damage resulting from accidents,misuse,abuse,alteration,tempering or failure of the purchase to follow the normal operating procedure outlined in user manual. ● Defect of damage due to spillage of liquids,due to insect or wrong use of electrical supply and voltage. ● Normal wear and tear,corrosion,rusting or stains. ● Scratches and damage to outer surface areas and externally exposed units or parts that are due to normal customer use. ● Claim for damaged/missing parts after seven days from the original date of purchase. ● If any part or parts of the unit are replaced with a part or parts not supplied or approved by company or unit has been dismantled or repaired by any person other than authorized technician. ● Product which has serial number removed or tampered. ● If the warranty card is being altered,defaced or erased in any manner whatsoever.
CUSTOMER CARE CENTER For any query or concerns related to the after sales service,you may please contact us on the number or email mentioned below. Tel:............................................ Email:................................................
