Preview only show first 10 pages with watermark. For full document please download

1 ™ What’s In The Box?

   EMBED


Share

Transcript

1 Your Touch by HTC™ What’s in the Box? Setti ng Emai Up l Guid e Battery Software Installation CD Touch by HTC™ Pouch Stylus Getting Started Guide Getting Started Packet microSD Card Screen Protector LCD Screen Protector Touch by HTC™ Mini-USB Headset Two Mini USB Adapter 2.5mm Headset Adapter USB Sync Cable Read This First AC Phone Charger © 2007 Sprint Nextel. All rights reserved. SPRINT and other trademarks are trademarks of Sprint Nextel. Left and Front View Rear, Right, Top, and Bottom Views Notification LEDs Power Key Speaker Earpiece Stylus Self-portrait Mirror Camera .0 E C GMA SM EPGIX XECLA AEPLIS EAR M AE RA Volume Slider 2.0 M2 Sync Connector/ Earphone Jack Storage Card Slot Cover Back Cover Lanyard/ Strap holder Talk Key Camera Key End Key Microphone RESET Button NAVIGATION Control/ ENTER 2 Battery and Power 3 Storage Card Install the Battery Inserting a microSD™ card 1. Slide the back cover upward to remove it. 1. Slide the back cover upward to remove it. 2. Insert the battery with its exposed copper part aligned with the protruding copper conductor on the battery compartment ( a ), and then gently push the battery into place ( b ). 2. Use your thumb or finger to pry open the cover that houses the storage card slot. To open the slot cover more easily, pry it open from both ends. b 3. Replace the back cover. a 4. To turn your device on and off, press and hold the Power Key. Storage card slot Slot cover 3. Flip your device so that the touch screen faces upward. 4. Hold open the slot cover with one hand, and then insert the microSD card into the storage card slot with the gold contacts facing down. Charge the Battery • Using the AC Phone Charger: Connect your device directly to an electrical outlet using the AC Phone Charger. • Using the USB Sync cable: Plug the sync cable into the USB port on your PC and into the sync connector on your device. 5. Close the slot cover and replace the back cover. Storage card 4 Using the Phone Note: Before you can make or receive a call, your device must be activated. See the Welcome to Sprint brochure for information about activation. Make a Call 1. Tap Start > Phone. 2. Tap the phone number and then press the Talk key. Answer a Call End a Call Tap Answer or press the Talk key to answer an incoming call. Tap End or press the End key to hang up. In-Call Options Turn Speakerphone on or off Mute/unmute call End call Press the Talk key Dial the phone number 5 Setting Up Your Voicemail All unanswered calls to your device are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated. 1. Tap Start > Phone or press the Talk key. 2. On the Phone screen, tap and hold the key. Tap and hold 3. Follow the system prompts to: • Create your passcode. • Record your greeting. • Record your name announcement. • Choose whether or not to activate One-Touch Message Access. Dialing voicemail Note: If you are concerned about unauthorized access to your voicemail account, Sprint recommends you enable your voicemail passcode. 6 HTC Home and TouchFLO™ HTC Home Touch Cube HTC Home is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, day, and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access. HTC Home has four components: Home, Weather, Launcher, and Sound. At the bottom of HTC Home, there is a toolbar that allows you to switch between these components. Home Weather • To open Touch Cube, slide your finger upward, starting from the logo at the bottom of the touch screen. • To close Touch Cube, slide your finger downward. • Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. HTC Home Launcher Sound TouchFLO™ TouchFLO™ gives you a better touch screen experience on your device. Using TouchFLO, you can easily scroll and pan the screen by sliding your finger on the touch screen. TouchFLO also has Touch Cube, where you can add your favorite contacts, access media, launch programs, and more. Finger-scrolling and finger-panning While on a Web page, document, or list (such as contacts list, file list, etc.): • Slide your finger upward to scroll down; slide your finger downward to scroll up. • To scroll to the right, slide your finger to the left. To scroll to the left, slide your finger to the right. • Touch and hold on the touch screen and then drag your finger around the screen in any direction. 7 Synchronizing Information ActiveSync ® Windows Mobile ® Device Center The Software Installation CD that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps below to install and set up ActiveSync on Windows XP or other compatible Windows systems: Microsoft Windows Mobile ® Device Center is the replacement for Microsoft ® ActiveSync ® on Windows Vista ®. Follow the steps below to set up synchronization on your Windows Vista computer. 1. Connect your device to your PC. The Windows Mobile Device Center will open. 1. Insert the Software Installation CD into the disc drive on your PC. 2. Click Setup and Installation. 2. On the license agreement screen, click Accept. 3. Follow the step-by-step instructions to complete the installation. After the software has been completely installed, restart your PC. 4. When your PC boots up, verify that the ActiveSync icon ( your desktop (in the lower right corner). 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. ) appears on 4. Select the information types that you want to synchronize, and then click Next. 5. Connect your device to the PC, and ActiveSync will automatically detect your device and prompt you to set up a partnership. When it is connected successfully, the ActiveSync icon turns GREEN ( ). 5. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically. 6. When you are finished, you can use Windows Mobile Device Center to synchronize information and manage your device. 8 Status Icons Icons that appear in this area Icons that appear in this area There are more notifications. Tap the icon to view all. Data connection is active but idle Data connection is active and transmitting data Maximum signal strength New email or text messages New voicemail New instant message from Live Messenger Icons that appear in this area Icons that appear in this area Icons that appear in this area No signal Missed call 1xRTT available Vibration mode Battery charging Phone is turned off Speakerphone on EVDO available Sound on Battery full No phone service. Sound off Battery very low Searching for service Voice call in progress Roaming Connection is active Alarm Connection is not active Bluetooth stereo headset detected Synchronization in progress ActiveSync notification Synchronization error 9 Using the Comm Manager Comm Manager acts as a central switcher that lets you enable or disable phone features as well as manage your data connections easily. To access Comm Manager, tap Start > Programs > Comm Manager. Airplane Mode on/off Phone on/off Bluetooth on/off DirectPush on/off Data Connection* Ringer/Vibrate Internet Sharing Open ActiveSync Comm Manager * Tap to disconnect active data connections. However, you cannot reconnect data connections in Comm Manager. 10 For More Information • To learn more about using your device, please refer to the User Guide (available on the provided CD). • For more information about ActiveSync, visit: http://www.microsoft.com/windowsmobile/help/activesync/default.mspx • For customer support, service rates, and product information, visit: www.sprint.com