Transcript
HIGH POWER LOUDSPeakER SYSTEM For Fixed installation & Touring
HT 122P
Powered 2-way system
CERTIFIED
Applications
The HT series loudspeakers are ideal for use in theatres, houses of worship ,nightclubs, multi-purpose venues, stage monitoring and as fill loudspeakers in larger indoor or outdoor systems.
Features The HT122P is a compact self-powered two way loudspeaker system that is designed for high quality distributed sound reinforcement or high performance touring or fixed installation. The HT122P is a self-powered 2-way system, the low section with 12- inch cone driver load by a bass- reflex tuned enclosure. the HF section with one 2-inch diaphragm compression driver (44.4mm voice coil) loaded on a can be 90° rotatable proprietary elliptic 80°(H) x 60°(V) high frequency horn.
Technical specifications Frequency response@-10dB
Coverage angle@-6 dB H:80°,nominal ,can be 60° (Rotatable) V:60°,nominal ,can be 80° (Rotatable) Sensitivity@1w/1m 98 dB / SPL Maximum SPL@1m 125 dB @ AES / 130 dB @ Peak / SPL f >90Hz, AES/Peak
The HT122P built-in a Powersoft DSP and CLASS D powered module that they offer comprehensive transducer protection, a precise system drive engine and an optimized on-board preset library.
Nominal impedance
8 ohms
Components LF: 1 x 12-inch cone driver HF:1 x 2-inch diaphragm compression driver
These high grade components are matched with a special passive crossover network to ensure a seamless transition between the HF and LF drivers. As a full range system, the frequency response shall be 60 Hz to 18 kHz (-10dB).
Amplifier
The cabinet constructed of 18 mm birch plywood with internal braces include one 35mm pole mount socket on the bottom to accept standard loudspeaker stand.
Connectors
DSP
1200W, AC 110-240V,Full protections 24bits,46kHz,56 bits internal processing,4 integrated presets,unlimited PC presets 2 x NC3 Inputs linked, 1 x USB, 2 x mains Powercon linked
Finish Black, other colours on request
Two recessed flush handles on the top and bottom are provided for easy lifting and carrying, internal M8 rigging points, performing rugged cabinet and very easy for rigging. The cabinet is finished in excellent black water-based textured paint and the front of the cabinet shall be protected by 1.8 mm thick acoustically transparent perforate steel with 0.5mm silk inside.
60 Hz ~ 18 kHz
Cabinet
18mm birch plywood with internal reinforcement, finished in water-based textured paint
Rigging Preset 8 M8 standard points Dimensions (H x W x D) Weight
Overall dimensions
600 x 398 x 350 mm Unit net weight: 26.8kg Unit gross weight: 28.8kg
398 »Sensitivity is the average SPL measured over the components rated bandwidthPower rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor,
600
over the components rated
bandwidth
350
» Directivity is averaged over the 250Hz-10 kHz range. » The SPeakON cables connectors are wired.
Front
Side
Top
Specifications subject to change without notice
Bottom
» AC: 110~240V, 50/60Hz.
www.trans-audio.cn
2 Shixin Road Donghuan St. 1st Caibian Industrial District Panyu Guangzhou China. www.lts-pro.com e.mail:
[email protected] Copyright © 2010,L.T.S Acoustics All rights reserved.
20
