Preview only show first 10 pages with watermark. For full document please download

1. Wall Mounting: Mount The Iap Eremote To A Clean, Dry Surface

   EMBED

Share

Transcript

1. Wall Mounting: Mount the IAP eRemote to a clean, dry surface using the screws supplied with your player. 2. Shelf Mounting: Apply the non-marring feet to the bottom of the Digital On-Hold System. 3. Connect the Internet cable to the Front Panel Network Port on your IAP eRemote and an open port on your router. 4. Using the supplied RCA Audio Output Cable, connect one end to the digital player in the 600ohm audio output on the Rear Panel. Then connect the other end of the RCA Audio Output Cable to the music on hold port of your telephone system. 5. Connect the AC Adapter to your IAP eRemote unit and plug into the wall outlet. You can tell the unit is powered by the solid red Power and Audio Indicator LED. 6. The audio will start playing in about 90 seconds. You can tell audio is playing when the light is flashing on the front panel Power and Audio Indicator LED. 7. The audio may be previewed by pushing in the speaker ON/OFF button on the front panel. Always turn the speaker off for normal use. 8. Use the volume control on the Rear Panel of the IAP eRemote to adjust the volume to the desired level.