Transcript
Simplifying Video Transport
FEATURES Single card optical ethernet transceiver • Electrical to optical • Optical to electrical • Optical to optical Transport • 10Base-T • 100Base-TX • 1000Base-T • Ethernet standard Supports ethernet standards • 803.2 • 802.3u • 802.3ab • 802.3z (fiber interface) Full featured • 10/100/1000 auto negotiate • Auto MDI/MDI-X • Auto full-duplex and half-duplex • Rate lockout via on-board switch or management module • Management module monitoring and configuration • Equalization for 100m Cat5 UTP@1000Mb/s Externally accessible SFP transceiver optics • Optical budget to 33dB • WDM (1310nm, 1550nm) • CWDM ITU G.694.2 (Channels 27-61) • DWDM ITU G.694.1 (Channels 21-60) Front and rear panel status LEDs • Major/minor alarms • Link status • Activity • Rate Multiple monitoring options • Front panel monitoring and status LED Remote management via DigiLink Manager • No external software required • HTTP or SNMPv2 • Monitor • Configure • Upgrade firmware
10/100/1000Mb/s Ethernet Optical Transceiver/Repeater [DLC200] DigiLink Video Transport System
The DLC200 is a flexible low-cost 10/100/1000 Ethernet optical transceiver. The DLC200 features industry standard SFP optics to provide 1310nm, 1550nm, CWDM, and DWDM optical transport with optical budgets up to 34dBm. The DLC200 provides for optical transport of 10Mb/s, 100Mb/s and 1000Mb/s ethernet. A fully featured ethernet optical transceiver, the DLC200 has two externally accessible SFPs and one UTP (RJ45 port). It can be deployed as UTP-to-optical, as optical-to-UTP, or as an optical-to-optical (optical repeat/regenerate). A single-piece rugged module, taking one slot in the DigiLink chassis, the DLC200 includes front panel LEDs for visual monitoring of status and on-board switches for configuration. Externally accessible industry standard SFP optics allow for rapid, tool free and flexible deployment into optical networks.
DLC200 10/100/1000 Ethernet Optical Transmitter and Repeater
RJ-45
10/100/1000 Ethernet Controller
SFP 1
10/100/1000 Ethernet
SFP 2
10/100/1000 Ethernet
10/100/1000Mb/s Ethernet Optical Transceiver/Repeater [DLC200] APPLICATIONS
10/100/1000 Ethernet Transport
10/100/1000
DLC200
10/100/1000
DLC200
DLC200
10/100/1000
DLC200
10/100/1000
SPECIFICATIONS Environment Operating temperature Ambient storage temperature Relative humidity Power dissipation
Regulatory Conformance 0 to 50°C -40 to 80°C 10 to 95% (non-condensing) 6 watts
Physical Dimensions
0.8” x 5” x 10.8” 1 slot in DigiLink video platform chassis
Compliance: NEBS Level 3, CSA 60950, EN60950, EN55022, FCC Part 15 (Class A), CISPR 22 Ordering Information DLC200 Function Module MODEL DLC200
DESCRIPTION PART # 10/100/1000Mb/s Ethernet 390-008100-00 Optical Transceiver
Optical Interface
SFP Optics See optics compatibility chart
Artel Video SFP See SFP specification sheet
Specifications are subject to change without notice.
Electrical Interface Connector RJ45 Data rates 10Mb/s 100Mb/s 1000Mb/s
Front panel monitoring and status displays
SFP Optics (Small Form-Factor Pluggable)
www.artel.com | 978-263-5775 |
[email protected] |
[email protected]
AR206-008100-B00_F
Rear panel includes RJ45 ethernet connector and dual SFP transceiver cages
