10/100base-tx/fx Bi-directional Media Converter

Transcript

Powered Fiber Optics Connection 10/100Base-TX/FX Bi-Directional Media Converter The OECB3XS1-X Bi-Directional Media Converter is a Fast Ethernet 10/100Base-TX to 100Base-FX WDM (Wavelength Division Multiplexing) Single Strand Fiber Module/Converter. It supports two types of media for network connections, such as 10/100Base-TX and 100Base-FX. This converter is designed with optic WDM technology which transports bi-directional fullduplex signals over a single fiber simultaneously. This single fiber converter can be used as a standalone unit. Slide-in modules are available upon request. FEATURES & BENEFITS ■ ■ ■ ■ ■ Complies with Fast Ethernet 10/100Base-TX and 100Base-FX 10/100Mbps and full/half-duplex automatically configure in TP port Full/half-duplex selectable in FX port MDI/MDI-X Auto Negotiation WDM technology combines two fiber cables into one single fiber ■ Saves expensive fiber cable installation ■ LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL ■ ■ Small packaging design Slide-in modules are available upon request ■ Cost efficient deployment ■ FCC Class A & CE approved TECHNICAL SPECIFICATIONS Standards Transfer Rate Wavelength Fiber Cable (µm) Max. Distance Power Supply Size Environment www.alphalinkcorp.com Alphalink Corporation 46500 Fremont Blvd. Suite 704 Fremont, CA 94538 USA 510.979.9010 800.230.7359 510.979.9060 Fax © 2003 Alphalink Corporation. All rights reserved. Connector Cable Model Length Buffer Memory MAC Address and Self-Learning IEEE802.3 10Base-T; IEEE802.3u 100Base-TX, 100Base-FX standards 10Mbps/100Mbps duplex automatically configure TX1310nm/RX1550nm; TX1550nm/RX1310nm 8.3/125, 8.7/125, 9/125 or 10/125 single-mode 20km 2A@+5V 26.2mm(H) x 70.5mm(W) x 94mm(D) Operating Temperature: 32 to 122 °F (0 to 60 °C) Storage Temperature : -4 to 140 °F (-20 to 70 °C) Relative Humidity: 5% to 90% RJ-45 Jack; Fiber optic connectors: SC Twisted Pair Cat. 5 UTP cable: 100m 128Kbyte 2K ORDERING INFORMATION Rate Wavelength Type Connector Distance S=Single-mode 1=SC 1=20km OECB 3=10/100Mbps 2=TX1310nm/RX1550nm 3=TX1550nm/RX1310nm