Preview only show first 10 pages with watermark. For full document please download

100305 Rack Mounted Pro Pilot

   EMBED

Share

Transcript

RACK MOUNTED PRO PILOT CHASSIS DIMENSIONS FOR CONNECTIONS TO THE STATIC AND PITOT PORTS STATIC PORT S PITOT PORT P .250 ID TYGON TUBING IS RECOMMENDED MC MASTER CARR PART NUMBER 5114K21 OR EQUIVALENT REAR VIEW (FACING) 6.11 NOTE: THE CHASSIS ASSEMBLY MOUNTS INSIDE THE SLEEVE ASSEMBLY THE SLEEVE ASSEMBLY MOUNTS TO THE INSTRUMENT PANEL STRUCTURE THE PANEL CUTOUT SHOULD BE 6.2" X 1.9". THE SLEEVE SHOULD BE INSTALLED SO THAT IT IS FLUSH AGAINST THE REAR OF THE PANEL CENTERED ON THE PANEL OPENING. 3.35 THE DESIGN WILL ACCOMODATE A PANEL THICKNESS OF UP TO 0.250" THE AUTOPILOT IS INSTALLED AND REMOVED FROM THE FRONT OF THE PANEL SO IT IS IMPORTANT TO ENSURE SERVICE LOOPS IN THE CABLE AND PITOT/STATIC TUBING ALLOWS INSTALLATION USING THIS METHOD 4.07 TOP VIEW 4.43 4.07 6.25 3.35 SIDE VIEW 1.87 100305 2.00 FRONT VIEW 0.72